The Earth and the moon will be stronger at the smaller distance, causing the moon to move faster and complete its orbit in less time.
C less than 27.3 days.
The orbital period of a satellite (like the moon) depends on its distance from the object it's orbiting (like the Earth). According to Kepler's laws of planetary motion, the square of the orbital period is directly proportional to the cube of the semi-major axis of the orbit.
If the moon is brought into a new circular orbit with a smaller radius (i.e., a smaller semi-major axis), its orbital period will decrease. This is because the gravitational force between the Earth and the moon will be stronger at the smaller distance, causing the moon to move faster and complete its orbit in less time.
To learn more about gravitational visit:
https://brainly.com/question/3009841
#SPJ11
(D) By symmetry V_R = V_S so âV_RS = 0 and W = qâV
Points R and S are each the same distance d from two unequal charges, +Q and +2Q, as shown above. The work required to move a charge -Q from point R to point S is
(A) dependent on the path taken from R to S
(B) directly proportional to the distance between R and S
(C) positive
(D) zero
(E) negative
The work required to move a charge -Q from point R to point S is zero. So, the correct option is D.
Electrostatic potential at a point is the work done in moving a unit positive charge from infinity to that point, against electrostatic force.
Since, the points R and S are equidistant from the charge +Q, the potential at R due to +Q will be equal to that at S due to +Q.
Also, the points R and S are equidistant from the charge +2Q. So, the potential at R due to +2Q will be equal to that at S due to +2Q.
Therefore, the potential difference between R and S is zero.
The total work required to move the charge from R to S,
W = q.V
So, W = 0
To learn more about electrostatic potential, click:
https://brainly.com/question/14762028
#SPJ4
If F = 40 N and M = 1.5 kg, what is the tension in the string connecting M and 2M? Assume that all surfaces are frictionless.
1) 13 N
2) 23 N
3) 36 N
4) 15 N
5) 28 N
The tension in the string connecting m and 2m is 1) 13 N.
To solve this problem, we'll use Newton's Second Law, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).
First, let's find the total mass of the system, which is M + 2M = 3M. Since M = 1.5 kg, the total mass is 3(1.5) = 4.5 kg.
Next, we'll find the acceleration of the system. Using F = ma, we have 40 N = (4.5 kg) * a. Solving for acceleration, we get a = 40 N / 4.5 kg = 8.89 m/s².
Now we'll find the tension in the string. The net force acting on mass M (1.5 kg) is equal to the tension T. Using Newton's Second Law again, we have T = (1.5 kg) * a. Substituting the value of acceleration, we get T = (1.5 kg) * 8.89 m/s² = 13.34 N.
Among the given options, the closest answer is 1) 13 N.
To learn more about tension, refer below:
https://brainly.com/question/15880959
#SPJ11
You are sleeping in your sister's room while she is away at college. Your house is on fire and smoke is pouring into the partially open bedroom door. The room is so messy that you cannot get to the door. The only way to close the door is to throw either a blob of clay or a super ball at the door-there's not enough time to throw both. Assuming that the clay blob and the super ball have the same mass, which would you throw to close the door-the clay blob (which will stick to the door) or the super ball (which will bounce back with almost the same speed it had before it collided with the door)? Give reasons for your choice, using any notions you already have or any physics concepts such as force, momentum, Newton's laws, etc. Remember, your life depends on it!
Assuming that clay blob and super ball have the same mass, you should throw clay blob at the door to close it.
What is momentum?Momentum is a fundamental concept in physics that describes quantity of motion of any object.
You should throw clay blob at the door to close it because the clay blob will stick to the door upon impact, transferring its momentum to door and effectively closing it.
If super ball is thrown at the door, it will bounce back with almost the same speed it had before it collided with door. This means that super ball will not transfer as much momentum to the door and door may not close fully.
To know more about momentum, refer
https://brainly.com/question/1042017
#SPJ1
If you touch the metal ball of a charged electroscope with an uncharged glass rod, what will happen to the electroscope?
When you touch the metal ball of a charged electroscope with an uncharged glass rod, the charge on the electroscope will remain the same.
This is because glass is an insulator and does not allow the transfer of charge from the electroscope to the glass rod. The electroscope will still retain the same amount and type of charge that it had before touching it with the glass rod.
The reason for this is that charge transfer can only occur between two objects that are conductive. This means that the charge can flow freely through the material.
In this case, the metal ball of the electroscope is conductive, while the glass rod is not. So, when the two objects come into contact, there is no way for the charge to transfer from the electroscope to the glass rod.
Overall, touching the metal ball of a charged electroscope with an uncharged glass rod will not change the charge on the electroscope, as the glass rod is an insulator and does not allow charge transfer.
To know more about electroscope refer here:
https://brainly.com/question/31030885#
#SPJ11
In calculating the light intensity transmitted by a polarizing sheet, which is true?
a. We use the cosine-squared rule when the incident light is unpolarized and the one-half rule when it is already polarized.
b. We use the cosine-squared rule when the incident light is already polarized and the one-half rule when it is unpolarized.
c. We always use the one-half rule.
d. We always use the cosine-squared rule.
The correct statement is:
b. We use the cosine-squared rule when the incident light is already polarized and the one-half rule when it is unpolarized.
When is the cosine-squared rule used?The cosine-squared rule is used when the incident light is already polarized, and it states that the intensity of the transmitted light is proportional to the cosine squared of the angle between the polarization direction of the incident light and the axis of the polarizing sheet.
The one-half rule is used when the incident light is unpolarized, and it states that the intensity of the transmitted light is half of the incident light intensity.
Learn more about incident light
brainly.com/question/15216529
#SPJ11
Look once more at the objects you ranked in Parts A and B. This time, rank the objects from left to right based on how much they have aged since they emitted the light we see today, from greatest to least.
- star on far side of Andromeda Galaxy
- star on near side of Andromeda Galaxy
- star on far side of Milky Way Galaxy
- star near center of Milky Way Galaxy
- Orion Nebula
- Alpha Centauri
- Pluto
- The Sun
As you found in Part B, light from more distant objects takes a longer time to travel to Earth. This means that we see more distant objects as they were longer ago. For example, if an object is 10 light-years away, then we see it as it was 10 years ago, but if it is 20 light-years away, we see it as it was 20 years ago. In other words, more distant objects have aged more since their light left on its way to Earth.
The ranking of objects based on the age of the light they emitted and the distance from Earth would be as follows, starting from the oldest to the youngest:
A star located on the far side of the Andromeda Galaxy
A star located on the near side of the Andromeda Galaxy
The Orion Nebula
A star located on the far side of the Milky Way Galaxy
A star located near the center of the Milky Way Galaxy
Alpha Centauri
The Sun
Pluto
Objects that are farther away from Earth have emitted light that has traveled a longer distance, thus aging more than objects that are closer. Therefore, the stars in the Andromeda Galaxy have aged the most, followed by the Orion Nebula, and then the stars in the Milky Way Galaxy. On the other hand, Alpha Centauri, The Sun, and Pluto are relatively closer to Earth, so they have aged less since emitting the light we see today.
To learn more about earth, refer below:
https://brainly.com/question/31064851
#SPJ11
if titanium has a density of 4510 kg/m3, what would a 0.001500 m3 block of titanium weigh in pounds? 1 pound is equal to 0.453592 kilograms (kg).
0.001500 m³ block of titanium would weigh approximately 14.915 pounds.
What is meant by density?Density is physical property of matter that explains how much mass is contained in any given volume of a substance and in other words, it is the amount of "stuff" (mass) per unit of space (volume).
We calculate the mass of the titanium block using its density and volume: mass = density × volume
mass = 4510 kg/m³ × 0.001500 m³
mass = 6.765 kg
6.765 kg × (1 pound / 0.453592 kg) ≈ 14.915 pounds
Therefore, a 0.001500 m³ block of titanium would weigh approximately 14.915 pounds.
To know more about density, refer
https://brainly.com/question/26364788
#SPJ1
What would be the actual rotor speed for a 4-pole three-phase squirrel-cage induction motor operating at 60 Hz if the rotor slip is 3%
The actual rotor speed is 1746 RPM.
The actual rotor speed for a 4-pole three-phase squirrel-cage induction motor operating at 60 Hz with a rotor slip of 3% can be calculated using the synchronous speed and the slip speed formulas.
First, determine the synchronous speed:
Synchronous speed (Ns) = (120 * frequency) / number of poles
Ns = (120 * 60 Hz) / 4 poles = 1800 RPM
Next, calculate the slip speed:
Slip speed = (slip percentage * synchronous speed) / 100
Slip speed = (3% * 1800 RPM) / 100 = 54 RPM
Finally, determine the actual rotor speed:
Actual rotor speed (Nr) = synchronous speed - slip speed
Nr = 1800 RPM - 54 RPM = 1746 RPM
So, the actual rotor speed is 1746 RPM.
To learn more about induction, refer below:
https://brainly.com/question/18575018
#SPJ11
what is the linear displacement of a wheel if the radius is 8m ad the angular displacement of the wheel is 3 rads?
The linear displacement of the wheel is 24 meters.
Angular displacement refers to the angle through which an object has rotated or turned, while linear displacement refers to the distance an object has moved in a straight line.
In the case of a wheel, when it rotates through an angle, say 3 radians, every point on its circumference moves a certain distance. The distance moved by each point is proportional to its distance from the center of the wheel, which is the radius of the wheel.
The linear displacement of a wheel can be found using the formula:
linear displacement = radius * angular displacement
In this case, the radius of the wheel is given as 8m and the angular displacement is given as 3 radians. Therefore, the linear displacement can be calculated as:
linear displacement = 8m * 3 = 24m
So the linear displacement of the wheel is 24 meters.
To learn more about linear displacement visit: https://brainly.com/question/28199594
#SPJ11
a student uses a converging lens to create an image of an object on a screen and collects the data shown above. what is the focal length of the lens? responses 15 cm 15 centimeters 30 cm 30 centimeters 40 cm 40 centimeters 60 cm
The focal length of the converging lens a student uses to create an image of an object on a screen is 12 cm.
To find the focal length of the lens, we can use the lens equation:
1/f = 1/d_o + 1/d_i
Where f is the focal length of the lens, d_o is the distance between the object and the lens, and d_i is the distance between the lens and the image.
From the data given, we can see that the object distance (d_o) is 30 cm and the image distance (d_i) is 20 cm. Plugging these values into the lens equation, we get:
1/f = 1/30 + 1/20
Simplifying this equation, we get:
1/f = (2 + 3)/60
1/f = 5/60
1/f = 1/12
Therefore, the focal length of the lens is 12 cm.
More on focal length: https://brainly.com/question/748993
#SPJ11
To calculate the heat required to raise the temperature of a substance you would be required to know the: specific heat
Specific heat is defined as the amount of heat energy required to raise the temperature of one unit mass of a substance by one degree Celsius.
To calculate the heat required to raise the temperature of a substance, you need to know the specific heat, which is a property of the material. The specific heat is the amount of heat needed to raise the temperature of one unit mass of the substance by one degree Celsius. In addition to the specific heat, you would also need to know the mass of the substance and the temperature change you wish to achieve. The heat required can be calculated using the formula:
Q = mcΔT
Where:
- Q represents the heat required (measured in joules or calories),
- m is the mass of the substance (measured in grams or kilograms),
- c is the specific heat of the substance (measured in joules per gram per degree Celsius or calories per gram per degree Celsius), and
- ΔT is the temperature change (measured in degrees Celsius).
By knowing these variables, you can easily calculate the heat needed to raise the temperature of a substance to the desired level.
Learn more about energy here: https://brainly.com/question/1932868
#SPJ11
the three air-preparation components located at the workstation are often close fi tted intoa unit referred to as the .
The compressed air used in these systems is of high quality and appropriate for the application, which can help to improve efficiency and reduce maintenance requirements.
The three air-preparation components located at the workstation are often close fitted into a unit referred to as the "air preparation unit" or "FRL unit" (which stands for "filter-regulator-lubricator" unit). This unit is used to prepare and condition the compressed air used in industrial applications, such as in pneumatic systems, to ensure that the air is clean, dry, and at the appropriate pressure for the application.
The filter component of the FRL unit removes impurities such as dust, oil, and water from the compressed air, which can cause damage or malfunction to downstream components if not removed. The regulator component controls the pressure of the compressed air to a desired level, while the lubricator component adds a fine mist of oil to the air to lubricate downstream components, which can extend their lifespan and improve their performance.
Overall, the FRL unit is a critical component of many pneumatic systems, as it ensures that the compressed air used in these systems is of high quality and appropriate for the application, which can help to improve efficiency and reduce maintenance requirements.
To learn more about requirements visit:
https://brainly.com/question/2929431
#SPJ11
Strategy for Solving for Ideal Gas with Changing Conditions (initial and final): values given for (I) and (f) except one.
Strategy for solving for ideal gas with changing conditions includes the ideal gas law equation PV=nRT to solve for an ideal gas with changing conditions.
Identify the given variables for the initial and final conditions, and use the equation to solve for the missing variable.
Ensure the units used are consistent and convert if necessary.
The ideal gas law only applies to ideal gases at low pressure and high temperature, so if the conditions don't meet these criteria, another equation or method may be needed.
Lastly, keep track of the units of the answer and make sure they match the desired units.
Read more about Ideal gas
https://brainly.com/question/31463642
#SPJ11
Wiggins notes that race-based explanations of sports performance were harder to find in the early 20th century. How does Wiggins explain this phenomenon?
Wiggins explains the fact of the lack of racialized explanations of athletic performance in the early 20th century, with respect to the dominant ideologies at the time.
During this time, segregation and discrimination were justified in many parts of society since it was widely believed that people of different races had inherent and unchangeable distinctions in their physical and mental skills. Sports, on the other hand, placed more emphasis on individual effort and training than on innate physical or mental qualities, hence there was less emphasis on race-based explanations of achievement. In other words, in the early 20th century, sports were seen as a meritocracy, where success was based on one's individual abilities and hard work, rather than one's race.
To know more about race-based explanations, here
brainly.com/question/28496589
#SPJ4
which one of the following questions cannot be answered by the egg drop interactive? (7 points) what affect does rebounding have upon the safety of an egg as it lands? what affect does the size of an egg have upon its impact force upon landing? what affect does the nature of a surface have upon the impact force of an egg that lands upon it? what affect does the height from which an egg falls have upon the velocity change it will encounter upon impact?
The question that cannot be answered by the egg drop interactive is "What effect does the nature of a surface have upon the impact force of an egg that lands upon it?"
The egg drop interactive allows for the manipulation of variables such as height, velocity, and egg size, but it does not provide a way to change the surface upon which the egg lands. Therefore, it cannot provide information on how the nature of a surface affects the impact force of an egg.
The egg drop interactive allows users to explore how changing certain variables affects the outcome of an egg drop experiment. For example, users can change the height from which the egg is dropped and observe how it affects the velocity and impact force upon landing. They can also change the size of the egg and see how it affects the force of impact. However, because the surface upon which the egg lands cannot be changed, the interactive cannot provide information on how the nature of a surface affects the impact force of an egg.
Learn more about velocity here:
brainly.com/question/17127206
#SPJ11
What causes side lobe artifact ?
a. sound beams bending
b. linear array transducer architecture
c. unexpectedly low acoustic attenuation
d. acoustic energy radiating in a direction other than the beam's main axis
Acoustic energy radiating in a direction other than the beam's main axis causes side lobe artifact.
The radiation of fibers that pass from the medial geniculate body to the transverse temporal gyri of the cerebral cortex and form part of the sub lentiform part of the internal capsule side lobes are unwanted energy emissions that occur at angles away from the main beam. it is the energy concerning the mechanical vibrations from its components that is called acoustic energy, these can create artifacts on the image, making it difficult to differentiate between true structures and false signals generated by the side lobes.
Learn more about lobes here: https://brainly.com/question/29768163
#SPJ11
A positive charge is fixed at the origin. A negative charge is moved along the x-axis from x = 50 cm to x = 10 cm. The potential energy of the system
The potential energy of a system of charges is determined by the position and relative distance between the charges. In this scenario, a positive charge is fixed at the origin while a negative charge is moved along the x-axis from 50 cm to 10 cm.
As the negative charge gets closer to the positive charge, the potential energy of the system decreases, as the electrostatic force between the two charges increases. This is because energy is required to move the charges against their natural tendency to be attracted to one another.
As the negative charge moves closer to the positive charge, the potential energy of the system decreases because the energy required to move the negative charge decreases.
The potential energy of the system is at a minimum when the negative charge is at its closest point to the positive charge. Overall, the potential energy of the system is determined by the distance and relative position of the charges.
To know more about potential energy refer here:
https://brainly.com/question/24284560#
#SPJ11
Provide a conceptual definitions for each of the following variables used to describe waves: wavelength, period, velocity, amplitude, frequency, intensity, and phase.
The conceptual definitions for terms describing waves are:
1. Wavelength: The distance between two consecutive points in a wave that are in the same phase, usually measured from crest to crest or trough to trough.
2. Period: The time it takes for one complete cycle of a wave to pass a given point, usually measured in seconds.
3. Velocity: The speed at which a wave propagates through a medium, typically measured in meters per second (m/s).
4. Amplitude: The maximum displacement of a point in a wave from its equilibrium position, often representing the energy or intensity of the wave.
5. Frequency: The number of complete wave cycles that occur in one second, typically measured in hertz (Hz).
6. Intensity: The amount of energy carried by a wave per unit time and area, often related to the amplitude and frequency of the wave.
7. Phase: The position of a point in a wave relative to the wave's cycle, usually measured in degrees or radians and used to describe the timing relationship between different parts of a wave or between multiple waves.
To learn more about intensity, refer below:
https://brainly.com/question/17583145
#SPJ11
According to Newton's second law, the angular acceleration experienced by an object rotating about a fixed axis is directly proportional to Select one or more: Da, the size of the object. b. the moment of inertia of the object c. net torque applied to the object. d. the moment of inertia and the net applied torque.
According to Newton's second law the angular acceleration will be (a) the size of the object.
What is the angular acceleration according to Newton's second law?According to Newton's second law, the angular acceleration experienced by an object rotating about a fixed axis is directly proportional to the net torque applied to the object. Therefore, option (c) "net torque applied to the object" is the correct answer. The moment of inertia (option b) is a property of the object that relates to how its mass is distributed around the axis of rotation, and it affects the angular acceleration, but it is not directly proportional to it. Option (d) is partly correct in that both the moment of inertia and the net applied torque affect the angular acceleration, but they are not directly proportional to it, so it is not a fully correct answer. Option (a) "the size of the object" is not directly related to the angular acceleration experienced by an object rotating about a fixed axis.
Leran more about Newton's second law
brainly.com/question/13447525
#SPJ11
f anya decides to make the star twice as massive, and not change the length of any crossbar or the location of any object, what does she have to do with the mass of the smiley face to keep the mobile in perfect balance? note that she may have to change masses of other objects to keep the entire structure balanced. view available hint(s)for part a if anya decides to make the star twice as massive, and not change the length of any crossbar or the location of any object, what does she have to do with the mass of the smiley face to keep the mobile in perfect balance? note that she may have to change masses of other objects to keep the entire structure balanced. make it eight times more massive make it four times more massive make it twice as massive nothing impossible to tell
The correct option is to make the smiley face four times more massive. This can be understood by considering the torque balance in the mobile.
The torque exerted by an object is given by the product of its mass and the distance from the pivot point.
Let's assume that the star has a mass of M, the smiley face has a mass of S, and other objects have masses of O₁, O₂, etc. The distance of the star, smiley face, and other objects from the pivot point can be denoted as R.
Initially, the torque balance can be written as:
Torque from the star = Torque from the smiley face + Torque from other objects
M × R = S × R + (O₁ × R + O₂ × R + ...)
Now, if Anya decides to make the star twice as massive, the new torque balance should still be maintained. Therefore, the equation becomes:
(2M) × R = S × R + (O1 × R + O2 × R + ...)
2M = S + (O1 + O2 + ...)
To maintain balance, the mass of the smiley face (S) needs to be four times more than its initial mass (S), as the mass of the star (2M) has doubled.
Learn more about torque, here:
https://brainly.com/question/30338175
#SPJ12
Prediction 1-2: For a solid/liquid mixture: What happens as you add energy? Does the temperature increase, the amount of solid change, or both?
The amount of solid present in the mixture, as the solid can melt and become a liquid, and the liquid can boil away and become a gas.
When you add energy to a solid/liquid mixture, the temperature typically increases, and the amount of solid changes.
The temperature of a solid/liquid mixture will initially increase as heat is added to the system. This is because the added energy is used to break the intermolecular bonds between the particles in the solid, allowing them to move more freely and become a liquid. During this process, the temperature remains constant until all the solid has melted, at which point the temperature starts to increase again.
As more energy is added, the temperature of the liquid will continue to increase until it reaches its boiling point. At this point, the added energy is used to break the intermolecular bonds between the liquid particles, allowing them to escape into the gas phase. The temperature remains constant during this process until all the liquid has boiled away.
Therefore, adding energy to a solid/liquid mixture can cause both a change in temperature and a change in the amount of solid present in the mixture, as the solid can melt and become a liquid, and the liquid can boil away and become a gas.
To learn more about temperature visit:
https://brainly.com/question/11464844
#SPJ11
you stretch a spring ball system 0.248 m away from its equilibrium point and watch it oscillate. you find that the system's angular frequency is 6.88 rad/sec. what is the maximum speed of the ball?
The maximum speed of the ball in this spring ball system is 1.704 m/s.
To find the maximum speed of the ball in this spring ball system, we need to use the equation for the angular frequency (ω) of an oscillating system:
ω = √(k/m)
Where k is the spring constant and m is the mass of the ball. We can rearrange this equation to solve for k:
k = mω^2
Now that we have the spring constant, we can use the equation for the maximum velocity (vmax) of an oscillating system:
vmax = Aω
Where A is the amplitude of the oscillation, which in this case is 0.248 m. Substituting the values we have:
k = mω^2 = (m)(6.88 rad/sec)^2 = 299.8m
vmax = Aω = (0.248 m)(6.88 rad/sec) = 1.704 m/s
Therefore, the maximum speed of the ball in this spring ball system is 1.704 m/s.
For more such questions on speed visit:
https://brainly.com/question/13943409
#SPJ11
a spherical gaussian surface surrounds an electric dipole. the net enclosed charge is zero. which is true?
When a spherical Gaussian surface surrounds an electric dipole, the net enclosed charge is indeed zero. This is true because an electric dipole consists of two equal and opposite charges (+q and -q) separated by a distance. When enclosed by the Gaussian surface, the positive and negative charges cancel each other out, resulting in a net charge of zero.
If the net enclosed charge within a spherical Gaussian surface surrounding an electric dipole is zero, it means that the dipole moment is also zero. This could occur if the two charges of the dipole are of equal magnitude and opposite sign, and are separated by an equal distance from the center of the sphere. Therefore, it is true that the net enclosed charge is zero in this scenario.
TO KNOW MORE ABOUT content loaded spherical gaussian surface CLICK THIS LINK-
brainly.com/question/19051961
#SPJ11
T/F Force A has a moment arm of 20cm and a magnitude of 5 N. Force B has a moment arm of 5cm and a magnitude of 20 N. Force A has a mechanical advantage over Force B
Yes, Force A has a mechanical advantage over Force B. This is because mechanical advantage is the ratio of output force to input force, and in this case, the output force is the torque or rotational force produced by the two forces.
To determine the mechanical advantage, we need to calculate the torque produced by each force. Torque (T) is the product of force (F) and moment arm (d), so T = F x d.
For Force A:
T_A = F_A x d_A = 5 N x 20 cm = 100 Ncm
For Force B:
T_B = F_B x d_B = 20 N x 5 cm = 100 Ncm
As the torque produced by both forces is equal (100 Ncm), Force A does not have a mechanical advantage over Force B.
To know more about mechanical advantage:
https://brainly.com/question/16617083
#SPJ11
The speed of light is about
Entry field with correct answer
299 million miles per hour.
299 million kilometers per hour.
299 million meters per second.
299 thousand meters per second.
The speed of light is about 299 million meters per second. Hence option C is correct.
Speed is a rate of change of distance with respect to time. i.e. v=dx÷dt. Speed can also be defined as distance over time
i.e. speed= distance ÷ time it is denoted by v and its SI unit is m/s. it is a scalar quantity.
Speed shows how much distance can be traveled in unit time. To find dimension for speed is, from formula Speed = Distance ÷ Time
Dimension for distance is [L¹] ,
Dimension for Time is [T¹],
Dividing dimension of distance by dimension of time gives, [L¹] ÷ [T¹] = [L¹T⁻¹] Dimension for speed is [L¹T⁻¹].
The speed of the light is 299000 kilometer per second. Hence it is 299 million meters per second.
Hence option C is correct.
To know more about light :
https://brainly.com/question/16713206
#SPJ4.
T/F The effective torque will always be in the direction of the angular acceleration
False. The direction of effective torque acting on a rotating object depends on various factors such as the direction of the applied force, the position of the force relative to the axis of rotation, and the rotational motion of the object.
The effective torque can be in the same direction or opposite direction to the angular acceleration of the object, depending on these factors. For example, if a force is applied perpendicular to the axis of rotation, the torque will be in the same direction as the angular acceleration. However, if the force is applied at an angle to the axis of rotation, the effective torque will have both a magnitude and direction that depends on the angle between the force and the axis of rotation.
In summary, the direction of effective torque is not always in the same direction as the angular acceleration and can vary depending on various factors.
Learn more about effective torque
https://brainly.com/question/16963511
#SPJ4
The SI units of acceleration are
Entry field with correct answer
m/s
kgm/s2
kg m2/s2
m/s2
The SI units of acceleration, specifically kgm/s² and m/s².
The SI unit for acceleration is meters per second squared (m/s²).
for such more questions on acceleration
https://brainly.com/question/460763
#SPJ11
At a distance of 4 LY, Proxima Centauri is the closest star to the Earth (other than the Sun). If it were located instead at a distance of 1 LY (1/4), its apparent brightness in our night sky would be
a. 16 times its present value
b. 10 times its present value
c. 6 times its present value
Answer:
The apparent brightness of a star is inversely proportional to the square of its distance from Earth. This means that if the distance to a star is reduced to 1/4 of its original distance, its apparent brightness will increase by a factor of (4)^2 = 16.
Therefore, if Proxima Centauri were located at a distance of 1 LY (1/4 of its current distance), its apparent brightness in our night sky would be 16 times its present value.
So the correct answer is (a) 16 times its present value.
Question 2-1. Check with your lab instructor to find the temperature in the room, T, in degrees Celsius. Recalling that the speed of sound in air is given by
v = 331 m/s + (0.6 m/soC)T
What is the expected value of the speed of sound?
The expected value of the speed of sound in air at a temperature of 25°C is 346 m/s.
The expected value of the speed of sound can be calculated using the formula provided:
v = 331 m/s + (0.6 m/soC)T
First, we need to find out the value of T, which is the temperature in the room. We should check with the lab instructor to get this information. Once we know the temperature, we can plug it into the formula to find the expected value of the speed of sound.
For example, if the temperature in the room is 25°C, we can calculate the expected value of the speed of sound as follows:
v = 331 m/s + (0.6 m/soC)T
v = 331 m/s + (0.6 m/soC)(25°C)
v = 331 m/s + 15 m/s
v = 346 m/s
Therefore, the expected value of the speed of sound in air at a temperature of 25°C is 346 m/s.
Learn more about "speed": https://brainly.com/question/13943409
#SPJ11
In the speech chain, the physiological level of the talker is associated with
