The balanced redox equations of the reactions are:
[tex]SiO_{3}^{2-} + 3\:H_{2}O + 4\:e^{-} \rightarrow Si + 6\:OH^{-}[/tex][tex]2\:Bi + 6\:OH^{-} \rightarrow 2\:Bi(OH)_{3} + 6\:e^{-}[/tex] [tex]SO_{4}^{2-} + 4\:H^{+} + 2\:e^{-} \rightarrow H_{2}SO_{3} + H_{2}O[/tex][tex]Mn^{2+} + 4\:H_{2}O \rightarrow MnO_{4}^{-} +8\:H^{+} + 5\:e^{-}[/tex]What are balanced redox equations?Balanced redox equations are those in which the atoms and electrons transferred are equal on both sides of the equation.
The balanced redox equations of the reactions are given below:
(3a) Balanced REDUCTION half reaction of the equation under basic conditions:
[tex]SiO_{3}^{2-} + 3\:H_{2}O + 4\:e^{-} \rightarrow Si + 6\:OH^{-}[/tex](3b)Balanced OXIDATION half reaction of the equation under basic conditions:
[tex]2\:Bi + 6\:OH^{-} \rightarrow 2\:Bi(OH)_{3} + 6\:e^{-}[/tex](4a) Balanced REDUCTION half reaction of the equation under acidic conditions:
[tex]SO_{4}^{2-} + 4\:H^{+} + 2\:e^{-} \rightarrow H_{2}SO_{3} + H_{2}O[/tex](4b) Balanced OXIDATION half reaction of the equation under acidic conditions:
[tex]Mn^{2+} + 4\:H_{2}O \rightarrow MnO_{4}^{-} +8\:H^{+} + 5\:e^{-}[/tex]Therefore, the balanced oxidation and reduction half reactions are balanced by adding the numerical coefficients to the reacting species as well hydrogen ions, hydroxide ions, water molecules and electrons to the appropriate side of the reactions.
Learn more about redox equations at: https://brainly.com/question/1161855
#SPJ1
Please help SCH3U :)
b
Explanation:
containing of ion electron and protons
Help please! Thank you!
Answer:
KCl
Explanation:
Ionic compounds are formed between atoms with very different electronegativity (EN) values. The elements with the highest EN values are on the top-right of the periodic table.
Ionic compounds are also generally between a metal and nonmetal. Nonmetals are located in the p-block (the right) of the periodic table and metals are pretty much everywhere else.
That being said, water (H₂O), CO, and CO₂ contain elements that have too similar of EN values to ionically bond.
However, the elements in KCl have different enough EN values to undergo ionic bonding by donating/receiving electrons from each other.
How many moles of nitrogen gas would be produced if 4.92 moles of copper(II) oxide were reacted with excess ammonia in the following chemical reaction? 2 NH₃(g) + 3 CuO (s) → 3 Cu(s) + N₂(g) + 3 H₂O(g)\
Answer:
4.92/3
Explanation:
ok？？？？？？？？？？？？
nts
S + 6 HNO3 → H₂SO4 + 6 NO₂ + 2 H₂O
In the above equation, how many grams of water can be made when 19.7 moles of HNO3 are
consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report
the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark
your answer incorrect.:
Molar
Mass
Element
Hydrogen 1
Nitrogen 14
Sulfur 32
Oxygen 16
Answer:
118.2 g H₂O
Explanation:
To find the mass of water, you need to (1) convert moles HNO₃ to moles H₂O (via mole-to-mole ratio from reaction coefficients) and then (2) convert moles H₂O to grams H₂O (via molar mass).
The molar mass of water can be found by combining the element's molar masses times their quantities. The ratios/conversions should be arranged in a way that allows for the cancellation of units (desired unit should be in the numerator).
Molar Mass (H₂O): 2(1 g/mol) + 16 g/mol
Molar Mass (H₂O): 18 g/mol
S + 6 HNO₃ ---> H₂SO₄ + 6 NO₂ + 2 H₂O
^ ^
19.7 moles HNO₃ 2 moles H₂O 18 g
-------------------------- x ----------------------- x --------------------- = 118.2 g H₂O
6 moles HNO₃ 1 mole H₂O
how many neutrones does the isotope n-14 have
Answer: 7
Explanation:
Proton/atomic number + Neutron = atomic mass
atomic mass - protons/atomic number = neutrons
14 - 7 = 7
A balloon is inflated to 7.0 L of volume. How many moles of gas does it contain at
STP?
0.31 moles
15 moles
3.2 moles
0.70 moles
The number of moles of gas, a balloon inflated to 7 L of volume at STP will be 0.31 moles.
What is the Molar volume ?The molar volume of a gas is the volume of one mole of a gas at STP.
At STP, one mole (6.02×10²³ particles) of any gas occupies a volume of 22.4 L
Therefore,
If 1 mole of any gas occupies 22.4 L of volume at STP
Then, X mole of gas occupies 7 L of Volume at STP
Now,
Let's equate both the above conditions ;
X / 7 L = 1 / 22.4 L
X = 1/ 22.4 L x 7 L
X = 0.31 moles
Hence, the number of moles of gas, a balloon inflated to 7 L of volume at STP will be 0.31 moles.
Learn more about Molar volume here ;
https://brainly.com/question/4172228
#SPJ1
The properties of an element depend on the electron structure within its atoms. The electrons are arranged in different
orbitals, at different energy levels and sublevels. Match each sublevel to the maximum number of electrons it can
accommodate?
S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
What are orbitals?The probability of finding an electron around the nucleus.
The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.
The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.
The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.
The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.
Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
Learn more about the orbitals here:
https://brainly.com/question/18914648
#SPJ1
A student combined equal amounts of two solutions. One solution had a pH of 2 and the other had a pH of 12. Which would
most likely be the resulting pH?
1
3
6
11
Answer:
the answer is 6. 2 goes into 12 6 times resulting in the answer 6
Guillaume Amontons first took a stab at measuring absolute zero in 1702. What would be the most reasonable way it would have been done then
The most reasonable way to measure absolute zero would have been to extrapolate the ideal gas law.
What is Absolute zero?This is referred to the temperature at which a thermodynamic system has the lowest form of energy.
Guillaume Amontons used gas equation to prove that absence of heat was theoretically possible which would have involved only extrapolating the ideal gas law.
Read more about Absolute zero here https://brainly.com/question/18560146
#SPJ1
What does Gay Lussacs law state and explain
Answer:
'Gay-Lussac's law is a gas law that states the pressure of a gas varies directly with temperature when mass and volume are kept constant. As the temperature increases, the pressure will also increase.'
Answer:
Gay Lussac’s law says that the pressure created by a gas is proportional to the temperature of the gas when the mass is constant or the same
so, when pressure increases so does the temperature and when pressure decreases so does the temperature
pls this this solutions
Please and thank you
3.8mL of 0.42 phosphoric acid is required.
Reaction
2H3PO4 + 3CaCL3 → Ca3(PO)4 + 6HCl
moles CaCl2 =0.16 mol/L x0.010 L = 0.0016 mol
moles of H3Po4
= 0.0016mol of CaCl2 x 2 mole of H3PO4/3mole of CaCl2
= 0.00106 mol
V of H3PO4 = 0.0016/0.42 = 0.0038L = 3.8mL
V of H3PO4=3.8mL
To know more about calculation in milliliters refer to:-
https://brainly.com/question/23276655
#SPJ10
Predict the shape of the molecule.
Number of electron pairs = \frac{1}{2}[V+N-C+A]
2
1
[V+N−C+A]
V = number of valence electrons present in central atom
N = number of monovalent atoms bonded to central atom
C = charge of cation
A = charge of anion
SbCl_5SbCl
5
:
In the given molecule, antimony is the central atom and there are five chlorine as monovalent atoms.
The number of electron pairs are 5 that means the hybridization will be sp^3dsp
3
B and geometry of the molecule will be trigonal bipyramidal.
a prescriber has ordered childrens motrin 400 mg po q6h for a child who weighs 60 kg. how many mg/kg is the child receiving
Answer:
6.67 mg/kg per dose ( 26.67 mg/kg per day)
Explanation:
400 mg / 60 kg = 6 2/3 mg/kg per dose
per DAY is four times this number
Which compound is water soluble?
O Li₂S
O PbBr₂
O Au(OH)3
O KCI
Answer:
Li2S is soluble in water
PbBr2 is soluble in hot water
KCI is soluble in water
Calculate the number of Pt atoms in the cube and find the radius in picometers of a Pt atom. Be sure your answer has the correct number of significant digits. Full questions are in pictures...Thank you!
V cube = 2.2³ = 10.648 cm³
V Pt atoms = 0.75(75%) x 10.648 = 7.986 cm³
Part 1
mass of a single Pt atom = 3.24 x 10⁻²² g
mass Pt atoms = ρ x V = 21.45 g/cm³ x 7.986 cm³ = 171.3 g
the number of Pt atoms = 171.3 : 3.24 x 10⁻²² = 5.287 x 10²³
Part 2
4/3πr³=7.986 cm³
r = 1.24 cm = 1.24 x 10¹⁰ pm
What best describes the reason why neap tides occur?
A. Neap tides occur in the fall and winter months when the Sun and Moon align obliquely to each other.
B. Neap tides occur when the angle between the Earth and Sun is 90° offsetting the attraction of the Moon.
C. Neap tides occur during the change of tide when there is no movement of water.
D. When the Sun and Moon are at right angles, the combined gravity is weaker producing modest tides.
Answer:
Explanation:
A
A group of students is comparing the graphs of strong acid-strong base and weak acid-strong base titration curves, where the base is the titrant. Which statement inaccurately describes a difference between the two curves?
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid- strong base.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve. Hence, option A is correct.
What is a weak acid?Weak acids are acids that don't completely dissociate in solution.
A weak acid is an acetic acid. It has a of 1.8⋅[tex]10^{-5}[/tex]. Calculate how much it will dissociate in water. Since acetic acid is a weak acid so large part will not dissociate completely.
[tex]k_a=\frac{[CH_3COO^-]H^+]}{[CH_3COOH]}[/tex]
B is not true, it shows the titration curve for weak/strong acid titrated with a strong base. When choosing an indicator for colourimetric titration select one so that the pH jump at the equivalence point contains the interval p±1. Phenolphthalein has a p≈9, so to decide if it is a suitable indicator check if the pH jumps from 8 to 10 at the equivalence point.
C is not true either because of the very slow reaction.
Learn more about weak acid here:
https://brainly.com/question/12811944
#SPJ1
For each substance that can move across the dialysis membrane, determine whether it will move into the blood, out of the blood,
or in both directions,
Moves into the blood
Moves out of the blood
Moves in both directions
water
Ducose
urea
Na, K, and Ca ions
The movements of the substance across the dialysis membrane are as following: water: Moves in both directions.
Glucose: Moves into the blood.
Urea: Moves out of the blood.
Na, K, and Ca ions: Moves in both directions.
What is dialysis?Dialysis is a process of filtration and purification of blood by a machine. This machine helped those people whose kidney stop working and doesn't purify the blood.
Thus, the correct options are: water: Moves in both directions.
Glucose: Moves into the blood.
Urea: Moves out of the blood.
Na, K, and Ca ions: Moves in both directions.
Learn more about dialysis
https://brainly.com/question/16026206
#SPJ1
What is the ph of a peach with a [ –oh] = 3.2 × 10 –11 m?
i hope someone can help me here please don't answer nonsense!
Answer:
4560 torr
Explanation:
PV = K
4 x 1.5 = k
k = 6
V = k / p
V = 6 / 1
V = 6
atm to torr = 1 to 760
760 x 6 = 4560
The table shows the total number of electrons in Atom A and Atom B.
Atom Number of Electrons
10
B
12
Which statement is correct? (5 points)
O A will give up two electrons to form bonds.
• B will give up two electrons to form bonds.
• Both A and B will be chemically unreactive.
• Both A and A B will gain electrons to become stable.
Answer:
The answer is "B will give up two electrons to form bonds".
Explanation:
To first solve this multiple choice question, we need to identify the Atoms, A and B.
We can do this by looking at their amount of electrons.
For instance,
A = Neon = 10 Electrons
B = Magnesium = 12 Electrons
With this information we can then look at both elements charges to see what they need to form a bond.
In this case Neon doesn't want to form a bond, since they're in a complete octet, however Magnesium does not have a complete octet. So, it wants to give up two electrons to form a bond (2+ charge shows us that).
This then shows us that Option 2, "B will give up two electrons to form bonds" is correct.
Answer:
B will give up two electrons to form bonds
Explanation:
How many grams of glucose (C6H12O6) are contained in 555 mL of a 1.77 M glucose solution?
176.980176 g of glucose ([tex]C_6H_{12}O_6[/tex]) are contained in 555 mL of a 1.77 M glucose solution.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
[tex]Molality = \frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]
[tex]1.77 M = \frac{Moles \;solute}{0.555 L}[/tex]
mole solute = 0.98235 g/mol
[tex]Moles = \frac{mass}{molar \;mass}[/tex]
[tex]0.98235 g/mol = \frac{mass}{180.16 g/mol}[/tex]
mass = 176.980176 g
Hence, 176.980176 g of glucose ([tex]C_6H_{12}O_6[/tex]) are contained in 555 mL of a 1.77 M glucose solution.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
number 3 pls and thank u
The statement which is not true is as follows:
The repulsive force between electrons on different atoms does not matter at all.Thus, the correct option is C.
What is Equilibrium?An equilibrium may be defined as the condition in which both the reactants and products are present in concentrations that have no additional propensity to alter with time so that there is no noticeable transformation in the possessions of the system.
The causation of repulsive force was thought to be made by the overlap of atomic orbitals and in between the electrons of diverse atoms, it matters a lot.
The equilibrium distance between nuclei of two covalently bonded atoms is called the bond length of that atom. It is the atomic separation at equilibrium.
Equilibrium occurs when the attractive and repulsive forces neglected the effect of each other in a specific state.
Therefore, it is well described above.
To learn more about Covalent bonds, refer to the link:
https://brainly.com/question/11651796
#SPJ1
Air pressure is measured in pascals. For a professional American football game, the ball should be inflated to about 90,000 pascals. Scientists studied the effects of air temperature on the pressure inside American footballs by taking these steps:
1. Prepare 100 footballs.
2. Measure each football's air pressure.
3. Divide footballs into 10 groups.
4. Place the groups in different lockers cooled to different air temperatures.
5. After 12 hours, remove the footballs from lockers.
6. Measure each football’s pressure again.
7. Compare the new pressures to the starting pressures.
What two terms best describe the variable "air pressure inside the football" in this experiment?
independent, qualitative
independent, quantitative
dependent, qualitative
dependent, quantitative
The variable "air pressure inside the football" in this experiment is quantitative and dependent variable. Hence, option D is correct.
What is the dependent variable?The dependent variable is the variable that is being measured or tested in an experiment.
In the experiment, the scientist filled the footballs with fix quantity of pressure which was then kept for 12 hours. After 12 hours the pressure inside the footballs was again measured. Pressure here is a quantitative variable.
Since the air temperature is an independent variable. The pressure being the dependent variable depends upon the temperature of the air.
Independent variable; The variable which does not depends upon any other variable.
Dependent variable; The variable which depends upon the independent variable or varies with the change independent variable.
Qualitative variables are variables which cannot be expressed in form of numbers. They generally convey the characteristic, category, quality or type.
Whereas Quantitative variables are the variables which can be expressed in the form of numbers. These are the variables which exist along the continuous sequence.
Learn more about dependent variables here:
https://brainly.com/question/1479694
#SPJ1
How many moles of HCl are needed to react with 0.87 moles of Na?
A:0.87 mol HCl
B:0.82 mol HCl
C:1.0 mol HCl
D:0.96 mol Na
The moles of HCl are needed to react with 0.87 moles of Na are the A:0.87 mol HCl.
How do you calculate moles of HCl?M = mol / L Calculate the molarity of an HCl answer which includes 18.23 g of HCl in 355. zero mL of answer. Calculate the wide variety of moles of HCl. Divide the wide variety of moles of HCl with the aid of using the overall quantity in liters.
We'll start with the aid of using writing the balanced equation for the reaction. This is illustrated below:Na+HCl->NaCl +H From the balanced equation above, 1 mole of Na reacted with 1 mole of HCI.Finally, we will decide the wide variety of moles of HCI required to react with 0.87 moles of Na. This may be acquired as illustrated below:From the balanced equation above,1 mole of Na reacted with 1 mole of HCI.Read more about the moles ;
https://brainly.com/question/15356425
#SPJ1
provide an example of unit conversion utilizing the process of dimensional analysis
Answer:
See below
Explanation:
1 year is how many seconds ?
1 year :
365 days/ yr * 24 hours / day * 60 min/ hour * 60 seconds/ min
=====
see how the 'days' 'hours' 'min' all cancel and you are left with
'seconds' / 'year' ? = 31 536 000 seconds/year
What hazard symbol does cement have?
Answer:
The answer is in the picture.
Calculate the standard enthalpy change associated with this reaction at 25 °C using the
following enthalpies of formation:
CH4 ∆Hf = -62.7 kJ·mol–1, CO2 ∆Hf = -393.5 kJ·mol–1, H2O ∆Hf = -285.8 kJ·mol–1.
The standard enthalpy change associated with the given reaction at 25 °C using the following enthalpies of formation will be − 902.4 kJ
What is Standard Enhalpy change ?The standard enthalpy change of formation of a compound is the enthalpy change which occurs when one mole of the compound is formed from its elements under standard conditions, and with everything in its standard state.
According to the balanced chemical equation ;
CH₄(g) + 2O₂(g) ⟶ CO₂(g) + 2H₂O(l)
Now,
ΔH⁰ = ΔH⁰f(products) − ΔH⁰f(reactants)
= [ΔH⁰(CO₂) +ΔH⁰(H₂O)] − [ΔH⁰(CH₄) + 2ΔH⁰(O₂)]
= [−393.5 + 2 x (−285.8)] − [−62.7 + 2 x 0]
= − 902.4 kJ
Hence, The standard enthalpy change associated with the given reaction at 25 °C using the following enthalpies of formation will be − 902.4 kJ
Learn more about enthalpy here ;
https://brainly.com/question/16720480
#SPJ1
Question 21
A sample of rainwater has a pH of 3.5. What ion is sure to be present in relatively
large concentration in this rain sample?
H3O+
SO4²-
OH
HSO4
A sample of rainwater with a pH of 3.5 is sure to contain a large concentration of [tex]H_3O^+[/tex]
pH scaleA pH value of 7 downward is said to be acidic. Upward of 7 is said to be basic. A pH of 7 on the dot is said to be neutral.
An acid is defined as a substance that produces [tex]H_3O^+[/tex] as its only positively charged ion in solution.
Thus, rainwater with a pH of 3.5 is acidic and will contain a high concentration of [tex]H_3O^+[/tex].
More on pH can be found here: https://brainly.com/question/15289741
#SPJ1
