32) How many atoms of carbon are contained in 47.6 g of Al2(CO3)3? The molar mass of Al2(CO3)3 is 233.99 g/mol. A) 1.23 × 10^23 C atomsB) 2.96 × 10^24 C atomsC) 2.87 × 10^25 C atomsD) 1.10 × 10^24 C atomsE) 3.68 × 10^23 C atoms

The name for aqueous HCl is hydrochloric acid. Hydrochloric acid is a strong, highly corrosive acid. The correct option is E.

HCL is commonly used in industrial processes and laboratory experiments. It is a clear, colorless solution that has a sharp, pungent odor and a sour taste.

The formula for hydrochloric acid is HCl, indicating that it is a binary acid composed of hydrogen and chlorine. When dissolved in water, HCl dissociates into H+ and Cl- ions, making it an electrolyte. Hydrochloric acid is used in the production of fertilizers, dyes, and pharmaceuticals, as well as in the food industry for the production of hydrolyzed vegetable protein and corn syrup. It is also used as a cleaning agent for various surfaces, including metals and masonry.

Hydrochloric acid is an important acid in chemistry and its name is derived from the fact that it contains hydrogen and chlorine. Therefore, option E, hydrochloric acid, is the correct answer.

For more such questions on Hydrochloric acid.

https://brainly.com/question/24586675#

#SPJ11

When a system is at equilibrium, the value of ÎSsys is zero, but the surroundings still experience a change in entropy (ÎSsurr) due to the transfer of heat between the system and surroundings. The value of ÎSsurr can be calculated using the formula ÎSsurr = -ÎSsys/T.

When a system is at equilibrium, it means that the rate of the forward and reverse reactions are equal, and there is no net change in the system. At this point, the system and the surroundings are in thermal equilibrium, meaning they are at the same temperature.

In this scenario, the change in entropy of the system (ÎSsys) is equal to zero, as there is no net change in the system. However, the surroundings still experience a change in entropy (ÎSsurr). This is because heat is transferred between the system and surroundings until both reach the same temperature. This transfer of heat results in a change in entropy of the surroundings.

The value of ÎSsurr can be calculated using the formula ÎSsurr = -ÎSsys/T, where T is the temperature at which the system and surroundings are in equilibrium. The negative sign in the equation indicates that the change in entropy of the surroundings is opposite in sign to the change in entropy of the system.

For more such questions on Equilibrium.

https://brainly.com/question/28301450#

#SPJ11

The relative boiling points of liquids could be predicted from the structures of the molecules by means of Intermolecular forces.

Intermolecular forces are the aggregate name for the forces that exist between the molecules themselves. The primary cause of the substance's physical properties is intermolecular forces. The condensed states of matter are caused by intermolecular forces. Intermolecular forces, which hold the particles that make up solids and liquids together, have an impact on a number of the physical characteristics of matter in these two forms.

A force that attracts the protons or positive parts of one molecule to the electrons or negative parts of another molecule is known as an intermolecular force. A substance's many physical and chemical characteristics are influenced by this force. The strength of an object's intermolecular forces determines its boiling point; the higher the intermolecular forces, the higher the boiling point.

We may compare the intermolecular forces between various substances by comparing their boiling points. This is so that these intermolecular interactions may be broken and the liquid can be transformed into vapour using the heat that the material absorbs at its boiling point.

Learn more about Intermolecular forces:

https://brainly.com/question/28320450

#SPJ4

The amount of sucrose that would produce 2546 kcal of energy is 649.4 g. The answer is a.

The given chemical equation indicates that 1 mole of C₁₂H₂₂O₁₁ reacts with 12 moles of O₂ to produce 12 moles of CO₂ and 11 moles of H₂O, along with the release of 1342 kcal of energy. This means that the amount of energy released is directly proportional to the amount of C₁₂H₂₂O₁₁ consumed in the reaction.

To calculate the amount of sucrose needed to produce 2546 kcal of energy, we can use the following proportion:

1342 kcal of energy is produced by 1 mole of C₁₂H₂₂O₁₁

x kcal of energy is produced by (x/1342) moles of C₁₂H₂₂O₁₁

So, we have:

x/1342 = 2546/1342

x = 2546 kcal

Therefore, (x/1342) moles of C₁₂H₂₂O₁₁ are needed to produce 2546 kcal of energy. We can now use the molar mass of sucrose (C₁₂H₂₂O₁₁) to convert the moles of sucrose to grams:

m = n × M

where m is the mass of sucrose, n is the number of moles of sucrose, and M is the molar mass of sucrose.

The molar mass of C₁₂H₂₂O₁₁ is 12(12.01) + 22(1.01) + 11(16.00) = 342.30 g/mol.

So, the mass of sucrose needed is:

m = (x/1342) × 342.30 g/mol

m = (2546/1342) × 342.30 g/mol

m = 649.4 g

To know more about chemical equation, refer here:
https://brainly.com/question/19626681#
#SPJ11

To adjust the pH of a 1 L phosphate buffer solution from 7.6 to the desired pH of 7.2, you should:

1. Recognize that the pKa value closest to the desired pH of 7.2 is 7.2 (among the given pKa values for phosphoric acid: 2.2, 7.2, and 12.3).
2. Understand that you will be working with the second acid-base equilibrium of phosphoric acid (H2PO4- and HPO4^2-) since their pKa value is 7.2.
3. If the current pH is 7.6 and you want to lower it to 7.2, you will need to add an acid to the solution to increase the concentration of H2PO4- ions and decrease the concentration of HPO4^2- ions.
4. The best choice for an acid is a dilute solution of a strong acid, such as hydrochloric acid (HCl), as it will dissociate completely and not affect the buffer's composition significantly, other than the desired pH change.
5. Add the dilute HCl solution dropwise to the 1 L phosphate buffer while stirring and continuously monitoring the pH until it reaches the desired pH of 7.2.

So, by carefully adding a dilute strong acid like HCl to the phosphate buffer, you can adjust the pH from 7.6 to the desired 7.2, ensuring that the buffer functions correctly in your experimental procedure.

To know more about acid-base equilibrium :

https://brainly.com/question/2794783

#SPJ11

Yes, this is still a transmutation process because a neutron is being absorbed by the Pu-240 nucleus, which results in the formation of Pu-241 nucleus. Although the atomic number of the element remains the same (Pu-94), the mass number changes, making it a transmutation process.

Transmutation is the conversion of one element into another by changing the number of protons in the nucleus. In this reaction, the nucleus of 240Pu absorbs a neutron and becomes 241Pu, which is a different isotope of plutonium.

However, the nucleus of 241Pu is still the same element as 240Pu, as they both have 94 protons in the nucleus. Therefore, even though the element remains the same, a transmutation has still occurred as the number of neutrons in the nucleus has changed.

For more question on transmutation click on

https://brainly.com/question/1358500

#SPJ11

Reducing SDS-PAGE is exactly like SDS-PAGE but with the addition of a reducing agent, like β-mercaptoethanol, that will reduce disulfide bridges and result in a completely denatured protein.

In this technique, proteins are separated based on their molecular weight. The process starts with denaturing the proteins using SDS, a detergent that binds to and unfolds the proteins.

The reducing agent, β-mercaptoethanol, is then added to the sample, which breaks the disulfide bridges holding the protein's structure together. This results in completely linear, denatured proteins. The proteins are then loaded into a polyacrylamide gel and subjected to an electric field.

As the proteins move through the gel, smaller proteins travel faster, creating a separation based on size. Reducing SDS-PAGE is useful for the accurate determination of molecular weights and analysis of protein structure.

To know more about SDS-PAGE refer here:

https://brainly.com/question/30893895#

#SPJ11

The significance of polar and non-polar amino acids lies in their interactions within a protein structure. Polar amino acids are typically found on the surface of the protein, where they interact with water molecules and other polar molecules. Non-polar amino acids, on the other hand, are typically found in the interior of the protein, where they interact with other non-polar amino acids through hydrophobic interactions.

Amino acids are the building blocks of proteins, and they can be categorized as either polar or non-polar. Polar amino acids have a hydrophilic (water-loving) nature due to their polarity, while non-polar amino acids have a hydrophobic (water-fearing) nature due to their lack of polarity.

The balance between polar and non-polar amino acids is crucial in determining the overall structure and function of a protein. If there are too many polar amino acids in the interior of a protein, it may become unstable and unfold. Conversely, if there are too many non-polar amino acids on the surface of a protein, it may not be able to interact effectively with other molecules.

Overall, the significance of polar and non-polar amino acids lies in their ability to contribute to the stability and function of proteins. Understanding the properties of these amino acids is important in fields such as biochemistry and drug development.

To know more about the polar and non-polar amino acids refer here :

https://brainly.com/question/31234933#

#SPJ11

The correct option is a. The temperature and radius of the object.

The luminosity (or wattage) of a heated, opaque, object emitting continuous radiation (perfect ""black body"" like a star) is determined solely by its temperature and radius, according to the Stefan-Boltzmann Law. This law states that the energy radiated by a black body is proportional to the fourth power of its absolute temperature (in Kelvin) and its surface area. Specifically, the luminosity is proportional to the fourth power of the temperature multiplied by the surface area of the object.

Mass and color do not directly determine the luminosity of a black body. However, the temperature and radius of the object can indirectly affect its color, as hotter objects tend to emit bluer light while cooler objects tend to emit redder light.

Click the below link, to learn more about Luminosity:

https://brainly.com/question/3884164

#SPJ11

Nitrogen dioxide, NO2, an air pollutant, dissolves in rainwater to form a dilute solution of nitric acid. The equation for the reaction is 3NO2(g) + H2O(l) → 2HNO3(l) + NO(g). So, the standard entropy change for the reaction is -536.0 J/K.

To calculate ∆So for the reaction, we need to determine the standard entropy change (∆So) for each of the products and reactants, and then use them in the equation:

∆So = ΣS°(products) - ΣS°(reactants)

The standard entropy values can be found in a thermodynamics table, and for this reaction they are:

S°(NO₂(g)) = 239.9 J/K
S°(H₂O(l)) = 69.9 J/K
S°(HNO₃(l)) = 146.8 J/K
S°(NO(g)) = 240.0 J/K

Substituting these values into the equation, we get:

∆So = [2(146.8 J/K) + 240.0 J/K] - [3(239.9 J/K) + 69.9 J/K]
∆So = 293.6 J/K - 829.6 J/K
∆So = -536.0 J/K

Therefore, by calculating we can say that the standard entropy change for the reaction is -536.0 J/K.

To know more about the nitrogen dioxide refer here :

https://brainly.com/question/17126006#

#SPJ11

a) The weight of Mg-24 atom is 3.976 x 10⁻²² g or 39.76 μg, b) The weight of the given atom is 8.399 amu c) The total mass of 10,000 atoms of 24-Mg is 3.976 x 10⁻¹⁹ kg.

a) To convert the weight of Mg-24 atom from atomic mass units (amu) to grams and micrograms, we need to multiply the given weight by the conversion factor of 1.661 x 10⁻²⁴ g/amu. Therefore,

Weight in grams = 23.985 amu x 1.661 x 10⁻²⁴ g/amu = 3.976 x 10⁻²² g

Weight in micrograms = 3.976 x 10⁻²² g x 10⁶ μg/g = 39.76 μg

b) To convert the given weight of an atom in grams to atomic mass units (amu), we need to divide the weight by the conversion factor of 1.661 x 10⁻²⁴ g/amu.

Weight in amu = 1.395 x 10⁻²² g / (1.661 x 10⁻²⁴ g/amu) = 8.399 amu

c) The total mass of 10,000 atoms of 24-Mg can be calculated by multiplying the weight of one Mg-24 atom by 10,000. Therefore,

Total mass = 23.985 amu x 1.661 x 10⁻²⁴ g/amu x 10,000 = 3.976 x 10⁻¹⁹ kg.

learn more about atomic mass here:

https://brainly.com/question/17067547

#SPJ4

The value of ∆Go373 in kJ for the following reaction at 100 C using data in the Table of Standard Enthalpies and Table of Standard Entropies is  -91.7 kJ (approx.)

To calculate the value of ΔGₒ373 in kJ for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) at 100°C using the given data, we will use the equation:

ΔGₒ373 = ΔHₒ - (373K)ΔSₒ

First, calculate ΔHₒ:
ΔHₒ = [(1 mol)(-84.667 kJ/mol)] - [(1 mol)(52.284 kJ/mol) + (1 mol)(0 kJ/mol)] = -137.0 kJ

Next, calculate ΔSₒ:
ΔSₒ = [(1 mol)(229 J/molK)] - [(1 mol)(219.8 J/molK) + (1 mol)(130.6 J/molK)] = -121.4 J/molK

Now, plug these values into the equation:
ΔGₒ373 ≈ (-137 x 10³ J/mol) - (373K)(-121.4 J/molK) = -91.7 kJ

So, the value of ΔGₒ373 for this reaction at 100°C is approximately -91.7 kJ.

To know more about the standard enthalpy and entropy refer here :

https://brainly.com/question/12959763#

#SPJ11

The GBU-12 is a laser-guided bomb used by the military for precision strikes on targets, often in conflict zones. The GP bomb used as the warhead for the GBU-12 is the Mk 82, a 500-pound general-purpose bomb.

The "GP" in your question refers to "General Purpose," which is a type of bomb employed for various applications in warfare.

The Mk 82 warhead is designed to be versatile and effective against a range of targets, such as vehicles, buildings, and infrastructure. Its destructive power comes from the high-explosive filler, which typically consists of Tritonal or H6. This filler ensures a significant impact upon detonation, enabling the bomb to achieve its intended objective.

When paired with the GBU-12 guidance system, the Mk 82 becomes a highly accurate and lethal weapon. The guidance system utilizes a laser seeker and fins to steer the bomb towards a laser-designated target, ensuring precision strikes with minimal collateral damage. This makes the GBU-12 a valuable asset in modern warfare, as it allows for the effective elimination of specific targets while reducing the risk to civilians and friendly forces.

In summary, the GP bomb used as the warhead for the GBU-12 is the Mk 82, a 500-pound general-purpose bomb. When combined with the GBU-12's laser-guidance system, the resulting weapon is highly precise and effective for various military applications.

For more such questions on General-purpose bomb.

https://brainly.com/question/31606158#

#SPJ11

The length of the object below with accuracy and to the correct degree of precision is 12.5 cm. So, the correct answer is B).

The scale shows a reading that falls between the mark of 12 cm and its adjacent division. As each unit on the scale is equal to 1 mm, the length between two sub units is equal to 0.5 mm.

Therefore, since the scale reading falls somewhere between 1 mm unit of length, it can be taken as half of it, which is 0.05 mm. Thus, the total length of the object is 12.5 cm or 12.05 mm.

This calculation demonstrates the importance of precision in measurements and the need to take into account the scale's increments to ensure accurate results. So, the correct option is B).

To know more about length:

https://brainly.com/question/9842733

#SPJ1

--The given question is incomplete, the complete question is given

" Determine the length of the object below with accuracy and to the correct degree of precision.

Use this media to help you complete the question.

12.48 cm

12.5 cm

12.10 cm

12 cm "--

We would need 15 moles of H2 to react with 5 moles of Cr2O3 and convert it to pure chromium.

The balanced chemical equation for the reaction between chromium(III) oxide (Cr2O3) and hydrogen gas (H2) is:

Cr2O3 + 3H2 → 2Cr + 3H2O

This equation tells us that 1 mole of Cr2O3 reacts with 3 moles of H2 to produce 2 moles of Cr and 3 moles of H2O.

If we want to know how many moles of H2 are needed to react with 5 moles of Cr2O3, we can use a proportion:

1 mole Cr2O3 : 3 moles H2 = 5 moles Cr2O3 : x moles H2

Solving for x, we get:

x = (3 moles H2 / 1 mole Cr2O3) * 5 moles Cr2O3

x = 15 moles H2

So, we would need 15 moles of H2 to react with 5 moles of Cr2O3 and convert it to pure chromium.

Learn more about Cr2O3

brainly.com/question/1799578

#SPJ11

The groups can be ranked in order of increasing activating power as follows: -Br < -CH2CH3 < -OCH3 < -OCOCH2CH3

The activating power of a group in electrophilic aromatic substitution reactions is determined by its ability to donate electrons to the ring. The more electron-donating the group is, the more it activates the ring towards electrophilic attack.
In this case, the bromine (-Br) group is the least activating because it is electron-withdrawing due to its high electronegativity. The ethyl (-CH2CH3) group is slightly more activating than -Br because it has some electron-donating properties. The methoxy (-OCH3) group is more activating than -CH2CH3 because it has a stronger electron-donating ability through resonance. Finally, the ester (-OCOCH2CH3) group is the most activating because it has both resonance and inductive electron-donating effects.

Learn more about activating power here, https://brainly.com/question/26724488

#SPJ11

CBr[tex]_4[/tex] is the compound that would be soluble in octane C[tex]_8[/tex]H[tex]_{18}[/tex]. Therefore, the correct option is option B.

The degree to which an item dissolves into a solvent to form a solution is known as solubility. A fluid may completely dissolve in another. "Like dissolves like" is the general rule. Certain separation techniques rely on variations in solubility, which are quantified by the distribution coefficient. In general, as temperature rises, so do the dissolution rates of solids in liquids, while they fall as temperature rises and rise with pressure for gases. A solution is said to be saturated when, at a specific temperature and pressure, no additional solute can dissolve in it.  CBr[tex]_4[/tex] is the compound that would be soluble in octane C[tex]_8[/tex]H[tex]_{18}[/tex].

Therefore, the correct option is option B.

To know more about solubility, here:

https://brainly.com/question/14366471

#SPJ4

The molecular formula for the compound is [tex]N_{2}H_{4}[/tex].

The empirical formula gives you the simplest whole-number ratio of atoms in a molecule or compound. The molecular formula gives you the actual number of atoms of each element in a molecule or compound.

To determine the molecular formula of a compound with the empirical formula  [tex]NH_{2}[/tex] and a molar mass of 32.05 g/mol, follow these steps:

1. Calculate the molar mass of the empirical formula  [tex]NH_{2}[/tex]:
  - Molar mass of Nitrogen (N) = 14.01 g/mol
  - Molar mass of Hydrogen (H) = 1.01 g/mol
  - Molar mass of  [tex]NH_{2}[/tex] = (1 x 14.01) + (2 x 1.01) = 16.03 g/mol

2. Divide the given molar mass (32.05 g/mol) by the molar mass of the empirical formula (16.03 g/mol):
  - Ratio = 32.05 g/mol / 16.03 g/mol ≈ 2

3. Multiply the empirical formula by the ratio to get the molecular formula:
  - Molecular formula = [tex]NH_{2}[/tex] * 2 = [tex]N_{2}H_{4}[/tex].

To know more about Molecular Formula:

https://brainly.com/question/28647690

#SPJ11

The PCT (proximal convoluted tubule) makes new HCO3- by breaking down glutamine, which is absorbed into the cell.

This breakdown process results in the formation of 2 NH3 and α-ketoglutarate. The α-ketoglutarate is further broken down into 2 HCO3- and 2 H+. The 2 newly-formed HCO3- are then reabsorbed back into the bloodstream, while the 2 H+ ions are combined with the 2 NH3 to form ammonium ions (NH4+) which are then pumped out of the cell into the tubular fluid by the Na+/H+ antiporter. This allows for the excretion of excess acids and helps to maintain the body's acid-base balance.

Hence, The PCT (proximal convoluted tubule) makes new HCO3- by breaking down glutamine, which is absorbed into the cell.

To know more about PCT (proximal convoluted tubule), refer here:

https://brainly.com/question/27064013#

#SPJ11

The process you are referring to is called Fractional distillation.

Fractional distillation is a process used to separate two or more components from a solution when their boiling points have a difference of 25°C or greater. This method works by heating the mixture to a temperature between the boiling points of the two components, causing the component with the lower boiling point to evaporate first. The vapor is then condensed and collected separately from the remaining component in the solution.

To know more about Distillation:

https://brainly.com/question/29400171

#SPJ11

It is a second-order reaction since  the order of the reaction with respect to the reactant is 2.

To determine the order of the reaction with respect to the reactant, we'll use the rate law expression and the given information.

Given information: Doubling the concentration of the reactant increases the rate of the reaction by four times. Let's denote the reactant concentration as [A] and the initial rate of the reaction as k. The rate law expression can be written as:

Rate = k[A]^n

Now, we'll use the given information to set up an equation. When the concentration of the reactant is doubled, the rate increases four times:

4 * Rate = k[2A]^n

Now, we can divide this equation by the original rate equation:

(4 * Rate) / (Rate) = (k[2A]^n) / (k[A]^n)

This simplifies to:

4 = (2A)^n / (A)^n

Since A cancels out, we get:

4 = 2^n

To solve for n, we take the base-2 logarithm of both sides:

log2(4) = log2(2^n)

2 = n

So, the order of the reaction with respect to the reactant is 2, meaning it is a second-order reaction.

More on doubling reaction: https://brainly.com/question/14310214

#SPJ11

The MK 82 high-drag bomb is an unguided, low-cost, general-purpose weapon used primarily for air-to-ground combat missions. Its flight characteristics are primarily influenced by its aerodynamic design and deployment method.

The bomb's high-drag configuration is achieved through the use of a conical tail assembly, which is fitted with large, triangular fins. These fins, called "air brakes" or "drag fins," create significant aerodynamic drag, slowing the bomb's descent and allowing the attacking aircraft more time to safely exit the target area. This increased drag also provides for a more stable and predictable flight path, enabling more accurate targeting.

During deployment, the MK 82 is typically released from the aircraft's bomb bay or attached to an external hardpoint. Once released, the bomb's fins deploy, and it enters a controlled descent towards the target. Its trajectory is primarily influenced by its release altitude, speed, and the angle of release, as well as external factors such as wind and air density.

The bomb's impact is determined by its kinetic energy, which is a function of its mass and velocity upon impact. The high-drag design ensures that the MK 82 reaches its target with a relatively low terminal velocity, allowing for a more controlled explosion and reduced collateral damage.

In summary, the MK 82 high-drag bomb's flight is characterized by its aerodynamic design and deployment method. Its conical tail assembly and large fins create significant drag, providing a stable and predictable flight path. The bomb's impact and effectiveness are determined by its release parameters and external factors, making it a versatile weapon for various combat scenarios.

For more such questions on High-drag bomb.

https://brainly.com/question/31606134#

#SPJ11

1.39 moles of O₂ are required to completely react with 75.0 grams of Sb.

The concept of molar ratio pertains to the proportion of moles of one substance that partakes in a chemical reaction in relation to the moles of another substance that also takes part in said reaction. This is a fundamental principle in chemistry and is used to determine the stoichiometry, or quantitative relationship, between reactants and products.

Equation:

4 Sb + 3 O₂ --> 2 Sb₂O₃

From the equation, we see that for every 3 moles of O₂, 4 moles of Sb react. Therefore, the conversion factor we need is:

3 mol O₂ / 4 mol Sb

Using this conversion factor, we can set up the problem as:

75.0 g Sb x 1 mol Sb / 121.76 g Sb x 3 mol O₂ / 4 mol Sb = 1.39 mol O₂

To know more about molar ratio, click here

https://brainly.com/question/17920577

#SPJ1

The correct name for Mg3(PO4)2 is C) magnesium phosphate.

First, we need to determine the charge of the magnesium ion (Mg2+) and the phosphate ion (PO43-) in the compound.

The magnesium ion has a 2+ charge, since it is a group 2 metal and typically loses two electrons to form a cation.

The phosphate ion has a 3- charge, since it has one phosphorus atom with a 5+ charge and four oxygen atoms with a 2- charge each.

To balance the charges in the compound, we need three magnesium ions (3 x 2+ = 6+) and two phosphate ions (2 x 3- = 6-). This gives us the formula Mg3(PO4)2.

Now we can use the rules for naming ionic compounds to arrive at the correct name.

First, we name the cation (Mg2+) and then the anion (PO43-). Since phosphate is a polyatomic ion, we do not change the name, so it remains as "phosphate".

Next, we need to indicate the charge on the phosphate ion using a Roman numeral in parentheses. Since we have two phosphate ions in the formula, the charge on each ion must be 3- / 2 = 1.5-. This is not a whole number, so we round to the nearest whole number, which is 2-. Therefore, the correct name for the phosphate ion is "phosphate (II)".

Finally, we put the two parts together to get the full name: "magnesium phosphate dibasic".

So the correct answer is C) magnesium phosphate dibasic.

To learn more about electrons, refer below:

https://brainly.com/question/1255220

#SPJ11

The theoretical yield of AgCl is 85.10% when in the reaction 35.50 g AgCl is produced with 15.50 g of [tex]NH_4Cl[/tex] reacting with an excess of [tex]AgNO_3[/tex].

To find the theoretical yield of AgCl, we need to first calculate the number of moles of [tex]NH_4Cl[/tex] and AgCl involved in the reaction. Molar mass of [tex]NH_4Cl[/tex] = 53.49 g/mol, Number of moles of [tex]NH_4Cl[/tex] = 15.50 g / 53.49 g/mol = 0.290 mol, Molar mass of AgCl = 143.32 g/mol and Number of moles of AgCl = 35.50 g / 143.32 g/mol = 0.248 mol. The balanced chemical equation tells us that 1 mole of [tex]NH_4Cl[/tex] reacts with 1 mole of [tex]AgNO_3[/tex] to produce 1 mole of AgCl.

Therefore, the limiting reactant in this reaction is [tex]NH_4Cl[/tex], and the theoretical yield of AgCl can be calculated based on the number of moles of [tex]NH_4Cl[/tex]: Theoretical yield of AgCl = 0.290 mol [tex]NH_4Cl[/tex] x 1 mol AgCl / 1 mol [tex]NH_4Cl[/tex] x 143.32 g AgCl / 1 mol AgCl = 41.60 g AgCl. To calculate the percent yield of AgCl, we can use the formula: % yield = (actual yield / theoretical yield) x 100%. The actual yield of AgCl is given as 35.50 g. Therefore, % yield = (35.50 g / 41.60 g) x 100% = 85.10%

Learn more about the theoretical yield at

https://brainly.com/question/14966377

#SPJ4

LiAlH4 (lithium aluminum hydride) and NaBH4 (sodium borohydride) are both reducing agents commonly used in organic chemistry to reduce carbonyl compounds (such as aldehydes, ketones, and carboxylic acids) to alcohols.

The main difference in strength between these two reducing agents is related to the nature of the hydride (H-) ion that is involved in the reduction.

LiAlH4 is a stronger reducing agent than NaBH4 due to the fact that the Al-H bond is stronger and more polar than the B-H bond.

This means that LiAlH4 is a more powerful hydride donor and can reduce a wider range of functional groups than NaBH4, including esters, amides, nitriles, and even carboxylic acids.

NaBH4, on the other hand, is a milder reducing agent that is most commonly used for the reduction of aldehydes and ketones. It is less reactive than LiAlH4 because the B-H bond is weaker and less polar than the Al-H bond. As a result, NaBH4 is less likely to reduce other functional groups and is generally considered a more selective reducing agent.

learn more about organic chemistry here:

https://brainly.com/question/14623424?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

When the solute dissolves into the solvent and the system approaches saturation, dissolution occurs, the solute concentration increases, and a dynamic equilibrium is established between the dissolved and undissolved solute particles.

When the solute dissolves into the solvent, and the system approaches saturation, the following occurs:

1. The solute particles are surrounded by solvent molecules, causing them to separate from each other and disperse throughout the solvent. This process is known as dissolution.

2. As more solute dissolves, the concentration of the solute in the solvent increases.

3. The system approaches saturation when the solvent can no longer dissolve any more solute particles at a given temperature and pressure. At this point, the solution is said to be saturated.

4. When saturation is reached, the rate of dissolution becomes equal to the rate of precipitation (when solute particles rejoin to form solid crystals). This results in a dynamic equilibrium between the dissolved solute and the undissolved solute, maintaining a constant concentration of solute in the solvent.

To  know more about Saturation:

https://brainly.com/question/30487213

#SPJ11

The difference between % recovery and % yield lies in the calculation and meaning of the two terms. % Recovery refers to the amount of a desired product that is recovered after a chemical reaction or process, compared to the initial amount of starting material. On the other hand, % yield refers to the amount of product obtained from a chemical reaction or process, compared to the theoretical maximum amount that could be obtained. In other words, % yield takes into account any losses or inefficiencies in the reaction or process, while % recovery does not. Therefore, % yield is generally a lower value than % recovery.

The difference between % recovery and % yield is as follows:

% Recovery refers to the percentage of a substance that is successfully extracted or purified from a mixture during a chemical process. It is calculated by dividing the amount of the recovered substance by the initial amount of the substance, then multiplying by 100.

% Yield, on the other hand, is the percentage of the desired product obtained from a chemical reaction compared to the theoretical maximum amount that could be produced. It is calculated by dividing the actual yield of the product by the theoretical yield, then multiplying by 100.

In summary, % recovery focuses on the extraction or purification process, while % yield focuses on the outcome of a chemical reaction.

Learn more about % Yield at https://brainly.com/question/14531883

#SPJ11

An increase in temperature affects the reaction rate by increasing the velocities of particles that collide in the reaction, as well as increasing the number of collisions.

Here's a step-by-step methodology:
1. As temperature increases, particles gain more kinetic energy.
2. This increase in kinetic energy results in higher velocities for the particles involved in the reaction.
3. The higher velocities lead to more frequent collisions between particles.
4. More frequent collisions increase the probability of successful reactions, which in turn increases the reaction rate.

So, an increase in temperature leads to an increase in both the velocities of particles and the number of collisions, ultimately resulting in a higher reaction rate.

You can learn more about velocity at: brainly.com/question/30540135

#SPJ11

According to the forces of attraction present in water the properties of liquid water are  it has a very high boiling point when compared to other compounds of similar molecular weight and  it can dissolve polar substances, ionic substances, and even some non-polar gases.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

Learn more about forces of attraction ,here:

https://brainly.com/question/23841038

#SPJ4