2 Na2O2 + 2 H₂O = 4NaOH+O2

If sodium peroxide, Na2O2, is added to water, elemental oxygen gas, O2, and sodium
hydroxide, NaOH, are generated. Suppose 8.52 g of sodium peroxide, Na2O2, is added to a large
excess of water. What volume, in liters, of oxygen, O2, will be produced?

The new volume of the helium gas is 0.39 L.

The new volume of the helium gas is calculated by applying the following formula as shown below:

n₁V₁ = n₂V₂

where;

the final number of moles is calculated as;

n₂ = 0.51 g/4 g/mol

n₂ = 0.1275 mol

The final volume of the gas;

V₂ =(n₁V₁)/n₂

V₂ = (0.1 x 0.5 L )/ (0.1275)

V₂ = 0.39 L

Learn more about final volume of gas here: https://brainly.com/question/25736513

#SPJ1

The percent composition of iron, carbon, and nitrogen in Prussian Blue is approximately 56.27%, 15.38%, and 28.35%, respectively. The exact percentage of hydrogen depends on the value of x in the formula.

When evaluating a chemical complex, knowing the percentage composition of a certain element inside it may be helpful. The formula for percent composition is 100 times the product of the element's mass and its molecular mass.

It is free of sulphur and phosphorus and contains 48% iron. Siderite-smithsonite, siderite-magnesite, and siderite-rhodochrosite are solid solutions formed when zinc, magnesium, and manganese are substituted for iron.

To know more about Prussian Blue visit:-

https://brainly.com/question/26728476

#SPJ1

Answer:

The chemical equation for the decomposition of mercury(II) oxide is:

2HgO(s) → 2Hg(l) + O2(g)

This means that when solid mercury(II) oxide (HgO) is heated, it breaks down into liquid mercury (Hg) and gaseous oxygen (O2). The reaction is a decomposition reaction because one reactant (HgO) is broken down into two products (Hg and O2). This reaction is also exothermic, meaning that it releases heat.

Explanation:

The amount of heat required to raise the temperature of 67 g of water from 25.7°C to 66°C is approximately equal to 40.3 kJ. Thus, the answer is option a) 40.3 kJ.

The amount of heat required to raise the temperature of a substance is given by the equation:

q = m * c * ΔT

Here, q is the amount of heat required to raise the temperature , m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature due to the heat supplied.

Substituting the given values in the equation, we get:

q = (67 g) * (4.184 J/g°C) * (66°C - 25.7°C)

q = 40,332 J

Converting this value to kilojoules we obtain:

q = 40.332 kJ = 40.3 kJ

Thus 40.3 kJ of heat energy is required to raise the temperature of  67g of water from 25.7 °C to 66° C.

Learn more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ1

Answer:

The average would be found by:

(22.59 + 27.43 + 35.642) ÷ 3 = 28.554

Rounded to 4 significant figures:

28.55

Na sodium has one valence electron and has the electron configuration [Ne] 3s1.

Atoms frequently form bonds with other atoms that enable them to add electrons to their valence shells. For instance, the chemical sodium chloride (NaCl) can be created by the bonding of an atom with a single valence electron, like sodium, and an atom with seven valence electrons, like as chlorine. Chlorine absorbs the one valence electron from sodium and then adds eight electrons to its valence shell.

A subatomic particle with an electrical charge that is negative is called an electron. complemented by protons and neutrons, it is one of the primary building blocks of atoms.

To know more about electron visit :

https://brainly.com/question/1255220

#SPJ1

Filtration is the process of passing a liquid containing contaminants through a filter to get a cleaner liquid.

After filtration impurities are left on the filter when the liquid goes through it, resulting in a cleaner combination. The procedure of separating one ingredient from another in a compound is used in the purification of chemical compounds or any materials. A mixed sample is turned into fresh samples, each of which contains a single ingredient.Separation procedures are then utilised to separate these compounds. These techniques alter the relative proportions of components in a combination.The type of the compounds and the impurities in them influence the purification of organic chemicals and compounds.

Purification of compounds can be done in other methods as well such as distillation, chromatography, sublimation and crystallisation.

Learn more about filtration here:

https://brainly.com/question/31504556

#SPJ1

Full question:

What can you conclude after learning about filtration of solutions of organic compounds? Name other methods of purification of compounds.

Exactly 149.6J will raise the temperature of 10.0g of a metal from 25.0C. The specific heat capacity of the metal is 5.984 J/g°C.

The heat capacity of a sample of a substance divided by the mass of the sample yields the specific heat capacity (symbol c), also known as massic heat capacity. Informally, it is the quantity of heat that must be added to one unit of a substance's mass in order to raise its temperature by one unit. The specific heat capacity unit in the SI is the joule per kelvin per kilogram, or Jkg⁻¹K⁻¹. For instance, the specific heat capacity of water is 4184 J kg⁻¹K⁻¹, or the amount of energy needed to raise 1 kilogram of water by 1 K.

The specific heat capacity of the metal can be calculated using the equation Q = m × c ×ΔT.

Q = 149.6J

m = 10.0g

ΔT = (final Temperature - initial Temperature) = (25°C - 0°C) = 25°C

Plugging these values into the equation, we get:

149.6J = 10.0g × c ×25°C

Solving for c, we get:

c =  [tex]\frac{149.6J}{(10.0g *25C)}[/tex]

c = 5.984 J/g°C

Therefore, the specific heat capacity of the metal is 5.984 J/g°C.

To know more about specific heat capacity, visit:

https://brainly.com/question/29766819

#SPJ1

20.0 moles of oxygen react with Antimony to form 13.3 moles of Antimony (III) Oxide. We want to calculate how many moles of Antimony (III) Oxide will be formed from 20.0 moles of oxygen. This is a stoichiometry problem.

The link between the proportional amounts of components participating in a reaction or generating a compound is known as stoichiometry, and it is often expressed as a ratio of whole integers.

Assuming a balanced chemical equation, the stoichiometric ratio between Antimony (III) Oxide  and oxygen can be used to determine the number of moles of Antimony (III) Oxide  formed.

For example, the balanced equation for the reaction of Antimony with O2 to form Antimony (III) Oxide  is:

4 Antimony + 3 O2 → 2 Antimony (III) Oxide

From this equation, it can be seen that 3 moles of oxygen react with 2 moles of Antimony (III) Oxide . Therefore, if there are 20.0 moles of O2, then the number of moles of Antimony (III) Oxide  formed would be:

20.0 moles oxygen × (2 moles Antimony (III) Oxide  / 3 moles oxygen) = 13.3 moles Antimony (III) Oxide.

To know more about moles visit:-

https://brainly.com/question/26416088

#SPJ1

The birth weight of cats at the 90th percentile would be approximately 3.7 ounces. b. The birth weight of cats at the 10th percentile would be approximately 2.3 ounces.

There are three main methods of calculating weight:

1. Balance Beam Scale: A balance beam scale is an example of a mechanical weighing system. It uses a set of calibrated weights to measure the weight of an object.

2. Digital Scale: A digital scale uses an electronic or digital readout to display the weight of an object.

3. Calipers: Calipers are devices used to measure the distance between two points, such as thickness or diameter. They come in various sizes and shapes, depending on the type of measurement the user wants to take.

Birth weight is the weight of a baby at the time of birth. It is usually measured soon after delivery, with a special baby scale, though sometimes the baby's weight is estimated. The normal range of birth weight is anywhere between 5 lbs 8 oz and 10 lbs, though preterm or premature babies may be significantly lighter. A baby's birth weight is important because it can provide a clue to the baby's overall health. High birth weights may indicate an underlying medical condition, and low birth weights can be a sign of premature or difficult delivery and health risks associated with such a delivery.

To know more about birth weight, visit:

https://brainly.com/question/19262426

#SPJ1

Yes, a larger picture does develop. A concave lens cannot generate such an image since it always results in a decreased picture. Therefore, this lens is convex.

Convex and plane mirrors only create imaginary pictures. Real images can only be created by concave mirrors, and even then, only when the object is farther away from the mirror's surface than a focal length.

Real and virtual images can both be created by a convex lens. When an item is positioned outside of the focus, it creates a true, inverted picture, and when it is positioned between the focus and the optical centre, it creates a virtual, upright image.

learn more about Convex and plane mirrors

https://brainly.com/question/31524153

#SPJ1

The general trend in boiling points across the period is that they increase from left to right. This is because as you move from left to right, the number of protons in the nucleus increases, causing the attraction between the electrons and the nucleus to increase.

In an open system, this is referred to as atmospheric pressure. Pressure rises as boiling points and the amount of energy needed to boil liquids rise.

The standard boiling point should rise as intermolecular tensions grow. This is because it takes more energy to separate molecules during the transition from liquid to gas when intermolecular interactions are stronger.

To know more about boiling points visit:-

https://brainly.com/question/2153588

#SPJ1

Answer:

1. To calculate the number of moles of Cl- ion given, we need to first calculate the total number of Cl- ions in 1250 mL of Ringer's solution:

1250 mL x (109 mEq/L / 1000 mL/L) = 136.25 mEq of Cl-

Next, we can convert mEq to moles using the molecular weight of Cl-:

136.25 mEq x (1 mol / 1000 mEq) = 0.13625 mol of Cl-

Therefore, 0.13625 moles of Cl- ion were given.

2. To calculate the volume of 10% NaOH solution containing 2.2 g of NaOH, we need to use the definition of percent concentration:

10 g NaOH / 100 mL solution = 2.2 g NaOH / x mL solution

Solving for x, we get:

x = (2.2 g NaOH) / (10 g NaOH / 100 mL) = 22 mL

Therefore, 22 mL of 10% NaOH solution would contain 2.2 g of NaOH.

3. To calculate the number of moles of BaCl2 in 600 mL of a 2.5 M solution, we can use the definition of molarity:

2.5 mol/L = x mol / 0.6 L

Solving for x, we get:

x = 1.5 mol of BaCl2

Therefore, 1.5 moles of BaCl2 are in 600 mL of a 2.5 M solution.

4. To calculate the molarity of a solution of 29.2 g of NaCl in 134 mL of solution, we need to first convert the mass of NaCl to moles:

29.2 g NaCl x (1 mol / 58.44 g) = 0.499 mol NaCl

Next, we can calculate the volume of the solution in liters:

134 mL x (1 L / 1000 mL) = 0.134 L

Finally, we can calculate the molarity:

0.499 mol / 0.134 L = 3.72 M

Therefore, the molarity of the solution is 3.72 M.

5. To calculate the mass of Na2CO3 needed to prepare a 400 mL of 3.00 M solution of Na2CO3, we can use the molarity formula:

Molarity = moles of solute / liters of solution

Rearranging the formula to solve for moles of solute:

moles of solute = Molarity x liters of solution

moles of Na2CO3 = 3.00 M x 0.400 L = 1.20 moles of Na2CO3

Next, we can convert moles of Na2CO3 to grams using the molar mass of Na2CO3:

1.20 moles Na2CO3 x (105.99 g / 1 mole) = 127.2 g of Na2CO3

Therefore, 127.2 grams of Na2CO3 are needed to prepare a 400 mL of 3.00 M solution of Na2CO3.

6. To calculate the molarity of NaNO3 solution made by diluting 33.0 ml of a 5.50 M solution to a final volume of 250. mL, we can use the dilution formula:

M1V1 = M2V2

where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.

Rearranging the formula to solve for M2:

M2 = M1V1 / V2

M2 = (5.50 M) x (33.0 mL) / (250. mL)

M2 = 0.726 M

Therefore, the molarity of NaNO3 solution made by diluting 33.0 ml of a 5.50 M solution to a final volume of 250. mL is 0.726 M.

7. To calculate the grams of mannitol given in one hour, we can use the definition of percent concentration:

20 g mannitol / 100 mL solution = x g mannitol / 100 mL solution

Simplifying the equation, we get:

x = 20 g mannitol

Therefore, 20 g of mannitol are given in 100 mL of solution. Since the patient receives 100 mL of solution every hour, the amount of mannitol given in one hour is also 20 g.

8. To calculate the microliters of a 4000.0 ppm Fe stock solution

James Ensor's Christ's Entry into Brussels (1889) was painted as a sarcastic response to Rodin's "Burghers of Calais." Therefore, the correct answer is Rodin's "Burghers of Calais."

"Burghers of Calais" is a sculpture by Auguste Rodin that depicts six burghers of Calais, a city in France, who offered their lives to save their fellow citizens during the Hundred Years' War.

The sculpture is a representation of heroism, sacrifice, and patriotism. James Ensor, however, was critical of this type of heroic representation and sought to challenge it through his own art.

In "Christ's Entry into Brussels," Ensor depicts a grotesque and chaotic scene of Christ's triumphant entry into the city. The painting is a satirical commentary on the hypocrisy of organized religion and the political corruption in Brussels at the time. It can be seen as a direct response to the heroism and idealism of Rodin's "Burghers of Calais."

For more question on Brussels click on

https://brainly.com/question/17325795

#SPJ11

Answer:

80 - 4 − 2(2 + 1)² =

80 - 4 - 2(3)² =

80 - 4 - 2(9) =

80 - 4 -18 = 58

Answer: 58

Explanation: 80-4-2(2+1)²

=80-4-2(3)²

=80-4-2(9)

=80-4-18

=58

The entire spectrum of electromagnetic radiation emitted by celestial bodies, helps astronomers gain complete understanding of stars and planets.

The electromagnetic spectrum encompasses a vast array of electromagnetic radiation, spanning from the elongated wavelength of radio waves to the compact wavelength of gamma rays. This includes an assortment of radiation types, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays and gamma rays. With each variation possessing a unique wavelength and frequency, they all traverse at the speed of light.

Astronomers rely heavily on the electromagnetic spectrum to study celestial bodies like stars and planets. This spectrum enables them to detect and measure various forms of electromagnetic radiation emitted by these objects. The range of frequencies in this radiation spans from radio waves with longer wavelengths to gamma rays with shorter ones.

Different types of electromagnetic radiation provide distinct information about celestial objects, including their temperature, composition, and movement. For instance, visible light allows astronomers to observe the color and brightness of stars and planets, while radio waves can identify magnetic fields or map out gas and dust distribution in galaxies. This knowledge helps answer fundamental questions about the universe's nature such as how galaxies and stars form, evolve over time, and what causes the universe's expansion.

To know more about electromagnetic spectrum, click here

https://brainly.com/question/23727978

#SPJ1

On adding extra amount of C₂H₅OH to the system, the equilibrium will shift to the right, i.e., more C₂H₅Cl and H₂O will be produced and on  adding extra amount of HCl to the system, the equilibrium will shift to the left, i.e., more C₂H₅OH and HCl will be produced.

Le Chatelier's principle states that if a system at equilibrium is subjected to a change in concentration, pressure, temperature, or volume, the system will adjust itself in such a way as to counteract the change and re-establish equilibrium. Specifically, if the concentration of one or more of the reactants or products in a chemical reaction is changed, the system will shift in the direction that counteracts the change in concentration.

To answer this question, we need to know the chemical reaction in question and its equilibrium expression. Let's assume that the reaction is:

C₂H₅OH + HCl ⇌ C₂H₅Cl  + H₂O

The equilibrium expression for this reaction is:

K = [C₂H₅Cl ][H₂O]/[C₂H₅OH][HCl]

where [ ] denotes the molar concentration of the species.

Now, if we add extra amount of C₂H₅OH to the system at equilibrium, the equilibrium will shift in the direction that consumes the added C₂H₅OH. In other words, the system will try to decrease the concentration of C₂H₅OH by converting it to C₂H₅Cl and H₂O, in accordance with Le Chatelier's principle. As a result, the equilibrium will shift to the right, i.e., more C₂H₅Cl  and H₂O  will be produced, until a new equilibrium is established. This will increase the concentration of C₂H₅Cl and H₂O , and decrease the concentration of C₂H₅OH and HCl, but the value of K will remain the same.

On the other hand, if we add extra amount of HCl to the system at equilibrium, the equilibrium will shift in the direction that consumes the added HCl. In other words, the system will try to decrease the concentration of HCl by converting it to C₂H₅Cl  and H₂O. As a result, the equilibrium will shift to the left, i.e., more C₂H₅OH and HCl will be produced, until a new equilibrium is established. This will increase the concentration of C₂H₅OH and HCl, and decrease the concentration of C₂H₅Cl  and H₂O , but the value of K will remain the same.

Learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ1

The four types of physical weathering are:

1.) Frost action or freeze-thaw weathering

2.) Exfoliation or unloading

3.) Thermal expansion and contraction

4.) Abrasion

These types of weathering are similar in that they all involve physical processes that break down rocks and other geological materials without the involvement of chemical reactions.

Frost action occurs when water seeps into cracks in rocks and freezes, causing the water to expand and exert pressure on the surrounding rock. This process repeats over time and can cause the rock to fracture and break apart.

Exfoliation occurs when rocks that were once buried deep beneath the earth's surface are exposed to lower pressures as overlying rocks erode away. As the pressure decreases, the rocks expand and crack, causing outer layers of rock to peel away like layers of an onion.

Thermal expansion and contraction occurs when rocks are repeatedly subjected to heating and cooling cycles. This can cause the rock to expand and contract, leading to the development of cracks and fractures.

Abrasion occurs when rocks and other geological materials are subjected to repeated rubbing or grinding by other materials, such as wind-blown sand, water, or other rocks. This process can cause rocks to wear down and break apart over time.

In summary, these four types of physical weathering are similar in that they all involve physical processes that break down rocks and other geological materials, but each type operates under different conditions and results in different forms of weathering.

Answer:

below

Explanation:

The four types of physical weathering are:

1. Freeze-thaw weathering

2. Exfoliation

3. Abrasion

4. Thermal expansion and contraction

These types of physical weathering are similar in that they all involve the breakdown of rocks and other geological features due to physical forces rather than chemical reactions. In each case, the physical stress causes the rock to crack or break apart. Additionally, they all can occur in various types of climates and environmental conditions.

This is possible because the oxygen atom has two unpaired electrons that can form a covalent bond with the hydrogen atom's single unpaired electron.

Hydrogen is the lightest and most abundant element in the universe, making up approximately 75% of all matter. It is odorless, colorless, and tasteless, and is the simplest element, consisting of a single proton and electron. Hydrogen is an energy carrier, meaning it can store and transport energy, and it is also used in many industrial processes. It can be used to produce electricity in fuel cells, or burned in internal combustion engines to produce heat and power. It is also a key component of many fuels, including gasoline, natural gas, and methanol. Hydrogen has a wide range of applications, from powering cars and homes to providing clean energy for entire communities.

To learn more about hydrogen

https://brainly.com/question/24433860

#SPJ1

[tex]16H_{1}[/tex]+ + [tex]2Cr_{2O_{72} }[/tex]- + [tex]3C_{2H_{60} }[/tex] →4 [tex]Cr_{3}[/tex]+ + 3 [tex]CO_{2}[/tex] + 11 [tex]H_{2} O[/tex] is balanced equation. 3 is the coefficient in front of carbon dioxide in the balanced chemical equation

Define an equation with a balanced formula.

A balanced chemical equation, in which the masses of the reactants and products are equal, contains the same amount of atoms of each element on both sides of the equation.

Varied elements' atom counts in the reactants and products of unbalanced chemical equations are varied. Because the coefficients become the powers of the concentrations of the products and reactants, a balanced equation is crucial when utilizing a constant. The constant is wrong if the equation is unbalanced.

To learn more about balanced chemical equation use:

brainly.com/question/11904811

#SPJ1

The new pressure inside the balloon will be 1.91 atm after the gas is compressed to a volume of 4.6 L.

The scientist Robert Boyle discovered this empirical relationship in 1662, which asserts that under constant temperature, the pressure (p) of a given quantity of gas changes inversely with its volume (v). As a result, the equation pv = k, a constant, is produced.

P1 x V1 = P2 x V2

where the starting pressure and volume are P1 and V1, and the ultimate pressure and volume are P2 and V2.

Plugging in the given values, we get:

1.35 atm x 6.5 L = P2 x 4.6 L

Solving for P2, we get:

P2 = (1.35 atm x 6.5 L) / 4.6 L

P2 = 1.91 atm

To know more about volume visit:-

https://brainly.com/question/13986930

#SPJ1

The vapor pressure of methanol at 40°C is 0.234 atm.

Only two types of alcohol are methanol and ethanol. Ethanol, sometimes referred to as ethyl alcohol, has a chemical composition of two carbon atoms. Methanol, sometimes referred to as methyl alcohol, is made up of just one carbon atom.

ln(P2/P1) = (ΔHvap/R) x (1/T1 - 1/T2)

ΔGvap = -RTln(Pvap/P) = ΔHvap - TΔSvap

ΔGvap = -RTln(Pvap/P) = -166.6 kJ/mol

ΔSvap = S(g) - S(l) = 239.9 J/mol-K - 126.8 J/mol-K = 113.1 J/mol-K

ΔHvap = ΔGvap + TΔSvap = -166.6 kJ/mol + (298.15 K)(113.1 J/mol-K) = -134.6 kJ/mol

Now we can use the Clausius-Clapeyron equation to find the vapor pressure of methanol at -30°C and 40°C.

At -30°C, we have:

T1 = 25°C + 273.15 = 298.15 K

T2 = -30°C + 273.15 = 243.15 K

ΔHvap = -134.6 kJ/mol

R = 8.314 J/mol-K

ln(P2/5 atm) = (-134.6 kJ/mol / 8.314 J/mol-K) x (1/298.15 K - 1/243.15 K)

P2 = 0.0038 atm

Therefore, the vapor pressure of methanol at -30°C is 0.0038 atm.

At 40°C, we have:

T1 = 25°C + 273.15 = 298.15 K

T2 = 40°C + 273.15 = 313.15 K

ΔHvap = -134.6 kJ/mol

R = 8.314 J/mol-K

ln(P2/5 atm) = (-134.6 kJ/mol / 8.314 J/mol-K) x (1/298.15 K - 1/313.15 K)

P2 = 0.234 atm

To know more about vapor pressure visit:-

https://brainly.com/question/11864750

#SPJ1

The temperature of the ideal gas sample is approximately 358.4 degrees Celsius

The ideal gas law is expressed as:

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that:

Amount of gas n = 3.24 mol

Pressure P = 2.19 atm

Volume of the gas V = 76.67 L

Temperature T = ?

To determine the temperature, substitute the values into the equation above.

PV = nRT

T = PV / nR

T = ( 2.19 atm × 76.67 L ) / ( 3.24 mol × 0.08206 Latm/molK )

T = 167.9073 / 0.2658744

T = 631.5286 K

Convert to degrees Celsius

T = ( 631.529 − 273.15 ) °C

T = 358.4°C

Therefore, the temperature is 358.4 degrees Celsius.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

The phenomena results from the sun appearing to rise in the east and set in the west due to the Earth's anticlockwise revolution on its axis.

The majority of individuals are aware that the Sun "rises in the east and sets in the west". Most individuals, though, are unaware that is a generalisation. Actually, the spring and fall equinoxes are the only two days of the year when the Sun rises and sets directly east and west.

How weather patterns and ocean currents are impacted by the Earth's rotation. Because of the Coriolis effect, storms swirl in the Northern Hemisphere anticlockwise and in the Southern Hemisphere clockwise.

To know more phenomena visit:-

https://brainly.com/question/26101594

#SPJ1

The molecular equation for the reaction of aqueous iron(III) nitrate and aqueous lithium hydroxide is :

Fe(NO3)3(aq) + 3LiOH(aq) ⟶ Fe(OH)3(s) + 3LiNO3(aq)

By removing the spectator ions from the molecular equation—ions that appear on both sides of the equation but do not participate in the reaction—we can derive the balanced net ionic equation for the reaction. The spectator ions in this instance are Li+ and NO3-.

The net ionic equation is :

Fe3+(aq) + 3OH-(aq) ⟶ Fe(OH)3(s)

Be aware that solid Fe(OH)3 is created when the ions Fe3+ and OH- mix. Equations with (aq) for aqueous species and (s) for solid species denote the physical states.