Answer:
The answer is "0.047".
Explanation:
Given value:
[tex]\to t_{\frac{1}{2}}= 0.4406\\\\\to V=0.9375 V_{max}[/tex]
Calculating the capacitance:
[tex]\to V=V_{max} (1-e^{\frac{-t}{Rc}})[/tex]
In this, the t = time, which is taken to calculates its maximum voltage.
[tex]\to 0.9375 V_{max} = V_{max}(1-e^{- \frac{t}{103\times(165.279\times10^{-6})}})\\\\\to e^{- \frac{t}{103\times(165.279\times10^{-6})}}= 0.0625\\\\\to - \frac{t}{103\times(165.279\times10^{-6})} = \ln(0.0625)\\\\\to -t= 0.01702\times(-2.77258) \\\\ \to -t = -0.04719 \\\\ \to t= 0.04719 \approx 0.047 \ s[/tex]
What is the kinetic energy of a 2.1kg baseball and is traveling at 10 m/s?
Answer:
Explanation:
KE = 1/2mv^2
KE = 1/2(2.1)(10)^2
KE=105N
Suppose 550 g of water at 32 degrees * C is poured into a 210 - g aluminum can with an initial temperature of 15 degrees * C . Find the final temperature of the system, assuming that no thermal energy is exchanged with the surroundings.
Answer:
about 30.714degC
Explanation:
Assuming
specific heat of water at 4200 J/kg * K
specific heat of aluminum 900 J/kg * K
(actual values to higher precision differ, and also change slightly with temperature).
To raise the aluminum's temp by 1K we need 900J * (210g / 1kg) = 189J
189J given by the water decreases its temp by 1K * (189J / 4200J) * (1kg / 550g) = 0.0(81)K.
So every K the temp of aluminum rises, 0.0(81)K falls the temp of the water.
At a difference of (32degC - 15degC) = 17K, we infer the temp will balance out after 17K / (1K + 0.0(81)K) "steps", so about 15.714.
The final temperature will be around 30.714degC
The final temperature of the water-aluminum mixture is 30.7 ⁰C.
The given parameters;
mass of the water, = 550 ginitial temperature of the water, = 32⁰Cmass of the aluminum, 210 ginitial temperature of the aluminum = 15⁰ Cspecific heat capacity of water = 4.184 J/g⁰Cspecific heat capacity of aluminum = 0.9 J/g⁰CThe final temperature of the mixture is determined by applying the principle of conservation of energy;
Heat lost by the water = Heat gained by the aluminum
[tex]mc_w \Delta t = mc_{AL} \Delta t\\\\550 \times 4.184 \times (32 - t) = 210\times 0.9 \times (t - 15)\\\\73638.4 - 2301.2t = 189t - 2835\\\\76473.4 = 2490.2t\\\\t =\frac{76473.4}{2490.2} \\\\t = 30.7 \ ^0C[/tex]
Thus, the final temperature of the water-aluminum mixture is 30.7 ⁰C.
Learn more here:https://brainly.com/question/14854725
The graph show a distance travelled by four cars (A, B, C& D) over a period of time . Which car travelled at a greatest speed? *
Answer:
Car A traveled with the greatest speed.
Explanation:
We know that the steepness of the slope of the line on the distance-time graph represents speed.
Important Tip:
If the slope of the line is more vertical — steep — the speed will be fast.If the slope of the line is more horizontal — flatter — the speed will be slow.For example, at t = 5 seconds, the A car has covered more than 80 meters while all the other cars have covered less than 80 meters during the same period.
IIn fact, during the entire journey, it is clear that from the graph that the slope of the line of A car is more vertical — steep — than the slopes of cars B, C, and D.
Therefore, car A traveled with the greatest speed.
Which statement accurately describes viscosity?
A. A liquid with larger molecules resists movement more than a liquid with smaller molecules does.
B. A material slows or completely blocks the flow of electrons through it.
C. A material with relatively weak bonds between its particles can be shaped into a thin sheet.
D. Attractive forces between molecules at the surface cause a liquid to resist spreading out.
The statement that accurately describes viscosity is option D: Attractive forces between molecules at the surface cause a liquid to resist spreading out. Option D
Viscosity is a measure of a fluid's resistance to flow. It quantifies how easily a fluid can be deformed or how readily it flows. In liquids, viscosity arises from the cohesive forces between molecules.
When molecules in a liquid are attracted to each other, they tend to stick together and resist movement. At the surface of the liquid, there is a greater degree of attractive forces between the molecules since they have fewer neighboring molecules to interact with.
This surface tension creates a resistance to the spreading out of the liquid and causes it to exhibit a more rounded or droplet-like shape.
The attractive forces between molecules at the surface of a liquid contribute to the cohesive forces within the liquid as a whole, resulting in a higher viscosity.
The stronger the attractive forces between the molecules, the higher the viscosity of the liquid. For example, honey has a higher viscosity compared to water because the molecules in honey have stronger attractive forces, making it flow more slowly.
Option A is not an accurate description of viscosity. Viscosity is not solely determined by the size of the molecules in a liquid but rather by the strength of the attractive forces between the molecules.
Option B describes electrical conductivity, not viscosity. It refers to a material's ability to slow down or impede the flow of electrons.
Option C describes the property of malleability, not viscosity. It refers to a material's ability to be shaped into a thin sheet without breaking.
Therefore, option D accurately describes viscosity by highlighting the role of attractive forces between molecules at the surface of a liquid in resisting the spreading out of the liquid
For more such questions on viscosity visit:
https://brainly.com/question/2568610
#SPJ8
NEED HELP HELP HELP WILL GIVE BRAINLIST PLEASE
DESCRIBE THE IMAGE FORMS WHEN THE OBJECT NEAR TO THE CONCAVE MIRROR
Hope it helps
An apple in a tree has a GPE of 175 J and a mass of 0.36 KG how high from the ground is the apple Solve for  height
Answer:
The height of the apple from the ground is at 49552.61071 m or is approximately at 5.0 × 10 m
Explanation:
A skateboarder coasts a distance of 20 meters in 4 seconds. What is the person's speed?
Answer:
5 m/s
Explanation:
The formula of speed is : distance/time taken.
The skateboarder covered a distance of 20 meters in 4 seconds. So,
Distance = 20 meters
Time Taken = 4 seconds
Speed = 20/4 = 5 m/s
If you pedal harder so the bike tires push against the ground with
more force, what will happen to the bike?
Please helppp!!!
Answer:
friction from the ground rubs on the tire which gives it more force to move forward,
Explanation: without friction the bike wont be able to use the motion to move forward. but the tires start to wear out easily.
what do you call a material which is capable of reducing friction when applied between moving parts?
Answer:
The material is called a Lubricant.
Hope it helps! ☺️
A runner weighing 70 kg, moving at a speed of 8.8 m/s, rounds
a bend with a radius of 25 m. What is the centripetal force
needed to keep this runner on the curve?
a 250 N
b 100 N
C 217 N
d 158 N
Answer:
217 N
Explanation:
Answer:217N
Explanation:
Why does thunder come before lightning?
Answer:
That is because light travels much faster than sound waves. … It takes approximately 5 seconds for the sound to travel 1 mile.
Explanation:
If the thunder follows the lightning almost instantly, you know the lightning is too close for comfort.
A boat pulls an inner tube behind it using a rope. The rope exerts a force 155 N on the inner tube at an angle of 5.88 above the horizontal. What are the horizontal and vertical components of this force?
Answer:
154 N horizontal (to the right) 15.9 N vertical (up)
Explanation:
I got it right :)
An object has a mass of 3 kg and an acceleration 7 m/s2to the left. What is the force?
Answer:
your answer is 21 n
Explanation:
True or false
Forces/Dynamics
Answer:they answer is false
Answer:
6.T
7.T
8.F
9.F
10.T
Explanation:
The Sankey diagram shows the energy transfers in an LED light bulb.
(look at the attached photo)
Answer:
B)20%
Explanation:
only the 2j of energy is getting used out of 10j.all other 8j are wasted as heat.
therefore the efficiency=2/10*100=20
To what temperature will a 50.0 g piece of glass raise if it absorbs 5275 joules of heat and its specific heat capacity is 0.50 J/g°C? The initial temperature of the glass is 20.0°C.
Answer:
Final temperature, T2 = 131895°C
Explanation:
Given the following data;
Mass = 50g
Initial temperature = 20°C
Quantity of heat = 5275J
Specific heat capacity = 0.50 J/g°C
To find the final temperature;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
Making dt the subject of formula, we have;
[tex] dt = \frac {Q}{mc} [/tex]
Substituting into the equation, we have;
[tex] dt = \frac {5275}{50*0.50} [/tex]
[tex] dt = \frac {5275}{25} [/tex]
dt = 131875°C
Now, the final temperature T2 is;
But, dt = T2 - T1
T2 = dt + T1
T2 = 131875 + 20
T2 = 131895°C
The final temperature when a glass piece absorbs heat 5275 joules will be T2= 231 C
What is heat capacity?
The heat capacity is defined as the amount of heat any material can absorb when the temperature is changed to unit quantity.
Given the following data;
Mass = 50g
Initial temperature = 20°C
Quantity of heat = 5275J
Specific heat capacity = 0.50 J/g°C
To find the final temperature;
Heat capacity is given by the formula;
[tex]Q= mc(T_2-T_1)[/tex]
Where;
Q = represents the heat capacity or quantity of heat.
M= represents the mass of an object.
C= represents the specific heat capacity
T1= initial temperature
T2 = Final temperature
Substituting into the equation, we have;
[tex]Q=mc(T_2-T_1)[/tex]
[tex](T_2-T_1)=\dfrac{Q}{mc}[/tex]
[tex](T_2-T_1)=\dfrac{5275}{50\times 0.50}[/tex]
[tex]T_2=211+T_1[/tex]
[tex]T_2=211+20=231 ^oc[/tex]
Thus the final temperature when a glass piece absorbs heat 5275 joules will be T2= 231 C
To know more about Heat capacity, follow
https://brainly.com/question/21406849
What do seismic waves and sound waves have in common?
Describe what a high and low frequency electromagnetic wave look like:
We have that for the Question "Describe what a high and low frequency electromagnetic wave look like:" it can be said that
A high frequency wave will have shorter wavelength whereas a low frequency wave will have long wavelengthA high frequency wave will have shorter period whereas a low frequency wave will have long periodA high frequency wave will be Faster whereas a low frequency wave will have slower
From the question we are told
Describe what a high and low frequency electromagnetic wave look like:
Generally the equation for the frequency is mathematically given as
[tex]f=\frac{1}{t}\\\\and\\\\f=\frac{v}{\lambda}\\\\[/tex]
Therefore
A high frequency wave will have shorter wavelength whereas a low frequency wave will have long wavelengthA high frequency wave will have shorter period whereas a low frequency wave will have long period
A high frequency wave will be Faster whereas a low frequency wave will have slower
For more information on this visit
https://brainly.com/question/17756498
8. If Bulb 8 burns out, how will the remaining bulbs be affected?
1
2
3
4
5
6
7
8
Can someone help with this? (Picture above)
Answer:
Element #1
protons = 1
neutrons = 0
electrons = 1
atomic number = 1
atomic mass = 1
Element #2
protons = 2
neutrons = 2
electrons = 2
atomic number = 2
atomic mass = 4
Element #3
protons = 3
neutrons = 3
electrons = 3
atomic number = 3
atomic mass = 6
Explanation:
Atomic mass = proton = electrons at neutral state
please give me brainliest if my answer is helpful
A man pushed the box with a force of 20 N. The mass of the box doubled, but he still pushed with a force of 20 N.
Which option describes how the acceleration of the box after the mass was doubled?
a) The acceleration is 2x the original acceleration
b) Acceleration is 4x the original acceleration
c) Acceleration is 1/2x the original acceleration
d) Acceleration is 1/4x the original acceleration
Answer:
Option (c) Acceleration is 1/2x the original acceleration
Explanation:
To know the the correct answer to the question, we shall determine the acceleration of the box in each case.
Case 1:
Mass (m) = m
Force (F) = 20 N
Acceleration 1 (a₁) =?
F = ma₁
20 = m × a₁
Divide both side by m
a₁ = 20 / m
Case 2:
Mass (m) = 2m
Force (F) = 20 N
Acceleration 2 (a₂) =?
F = ma₂
20 = 2m × a₂
Divide both side by 2m
a₂ = 20 / 2m
a₂ = 10 / m
Finally, we shall determine the acceleration of the box after the mass was doubled. This can be obtained as illustrated below:
Acceleration 1 (a₁) = 20 / m
Acceleration 2 (a₂) = 10 / m
a₂ : a₁ = 10 / m : 20 / m
a₂ / a₁ = 10 / m ÷ 20 / m
a₂ / a₁ = (10 / m) × (m / 20)
a₂ / a₁ = ½
Cross multiply
a₂ = ½a₁
Thus, the acceleration of the box after the mass was doubled is ½ times the original acceleration.
34 Which of these human characteristics shows discontinuous variation?
A blood group
B hair color
C height
D weight
Answer:
Blood group
Explanation:
Answer:
A. Blood group.
Explanation:
They could purely random genetic changes.
What is physical activity?
Answer:
answer is b. any movement that uses your muscles and requires energy
Explanation:
Activity: Is it the same?!
Reflection of light (and other forms of electromagnetic radiation) occurs when the waves encounter a surface or other boundary that does not absorb the energy of the radiation and bounces the waves away from the surface. The simplest example of visible light reflection is the surface of a smooth pool of water, where incident light is reflected in an orderly manner to produce a clear image of the scenery surrounding the pool. Throw a rock into the pool (see Figure 1), and the water is perturbed to form waves, which disrupt the reflection by scattering the reflected light rays in all directions.
Some of the earliest accounts of light reflection originate from the ancient Greek mathematician Euclid, who conducted a series of experiments around 300 BC, and appears to have had a good understanding of how light is reflected. However, it wasn't until a millennium and a half later that the Arab scientist Alhazen proposed a law describing exactly what happens to a light ray when it strikes a smooth surface and then bounces off into space.
In this activity you will be working as an engineer that is working to modify different kinds of digital cameras and to study the effect of changing incident angle on the reflected angle.
Method
Explain the steps of your experiment and identify the scientific variables:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Independent Variable
----------------------------------------------------------------------------------------------------------------
• Dependent Variable
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if anyone does ib myp 3. pleaseeee helppp im gonnnnaaa fail.
sciences by concept myp 3 formative assesment.
im giving 50 points please just help meeeeeeeeeeee
Answer:r other boundary that does not absorb the energy of the radiation and bounces the waves away from the surface. The simplest example of visible light reflection is the surface of a smooth pool of water, where incident light is reflected in an orderly manner to produce a clear image of the scenery surrounding the pool. Throw a rock into the pool (see Figure 1), and the water is perturbed to form waves, which disrupt the reflection by
Explanation:
Activity: Is it the same?!
Reflection of light (and other forms of electromagnetic radiation) occurs when the waves encounter a surface or other boundary that does not absorb the energy of the radiation and bounces the waves away from the surface. The simplest example of visible light reflection is the surface of a smooth pool of water, where incident light is reflected in an orderly manner to produce a clear image of the scenery surrounding the pool. Throw a rock into the pool (see Figure 1), and the water is perturbed to form waves, which disrupt the reflection by scattering the reflected light rays in all directions.
Some of the earliest accounts of light reflection originate from the ancient Greek mathematician Euclid, who conducted a series of experiments around 300 BC, and appears to have had a good understanding of how light is reflected. However, it wasn't until a millennium and a half later that the Arab scientist Alhazen proposed a law describing exactly what happens to a light ray when it strikes a smooth surface and then bounces off into space.
In this activity you will be working as an engineer that is working to modify different kinds of digital cameras and to study the effect of changing incident angle on the reflected angle.
Method
Explain the steps of your experiment and identify the scientific variables:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
• Independent Variable
----------------------------------------------------------------------------------------------------------------
• Dependent Variable
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if anyone does ib myp 3. pleaseeee helppp im gonnnnaaa fail.
sciences by concept myp 3 formative assesment.
im giving 50 points please just help meeeeeeeeeeee
A protein-digesting enzyme when mixed with starch solution would
Answer:
It would produce fat..........
PLEASE HELP !!
Elements in period 2 on the periodic table all have blank
electron shells.
Answer:
Two orbitals for their electrons and six in the 2p subshell
Explanation:
Hope this helps :)
Need help as fast as possible please
I will mark BRAINLIST only for correct answers babes :)
Thank you!
Answer:
1) Image
2) virtual
i hope its right ! :)
Explanation:
What element atomic number is in Group 17 and Period 6?
[tex] \\ [/tex]
The halogen elements are the six elements in Group 17 of the periodic table. Group 17 is the second column from the right in the periodic table and contains six elements: fluorine (F), chlorine (Cl), bromine (Br), iodine (I), astatine (As), and tennessine (Ts).
[tex] \\ [/tex]
Hope It Helps!
An object has a force of 88N to the right Wth an acceleration of 8 m/s2 to the right. What is the mass of the object? (mass has a unit of kg.)
Answer:
your answer is 11
Explanation:
describe briefly the potential energy it has ( roller coaster)
Answer:
The energy that it starts with at the top of the inclinede Plane
Explanation:
Hope I helped:)
