For a system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 is will increase
What is the ratio of the partial pressure of PCl5 to the partial pressure of PCl3?Generally, the equation for chemiecal reaction is mathematically given as
PC3 (g) + C₁₁₂ (g) = PC15 (g) 3
Assuming the addition of some Cl2 gas. The reaction will shift to the right at the invariant volume temperature, maintaining equilibrium. This results in a rise in P9Cl5(g) and a fall in PpCl3(g).
PpCl (g) /PpCl (g) will increase
Read more about Chemical Reaction
https://brainly.com/question/11231920
#SPJ1
The ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increase for a system PCl₃ (g) + Cl₂ (g) --> PCl₅ (g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C when some Cl₂ (g) is added at constant volume and temperature.
What is the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃?
Generally, the equation for chemical reaction is mathematically given as ;
PCl₃ (g) + Cl₂ (g) --> PCl₅ (g)
Assuming the addition of some Cl₂ gas,
The reaction will shift to the right at the constant volume and temperature, maintaining equilibrium.
This results in a rise in PCl₅ (g) and a fall in PCl₃(g).
Hence, the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increases
Read more about Chemical Reaction here;
brainly.com/question/11231920
#SPJ1
Pleaseee help pleaseee!!!
NaClO₃ ⇒ NaCl + O₂ ⇒ unbalanced
1. O : left 3, right 2
give coefficient left 2, right 3
2NaClO₃ ⇒ NaCl + 3O₂
2. Na and Cl : left 2, right 1
give coefficient right 2
2NaClO₃ ⇒ 2NaCl + 3O₂ ⇒ balanced
Sort the length measurements in increasing order of magnitude from smallest to largest.
The length measurements in increasing order of magnitude from smallest to largest is Nanometer, micrometer, centimeter, decimeter, dekameter, kilometer.
What is Measurement ?Measurement is the quantification of attributes of an object or event, which can be used to compare with other objects or events.
Measurement is a process of determining how large or small a physical quantity is as compared to a basic reference quantity of the same kind.
Hence, Among the given length measurements, The increasing order of magnitude from smallest to largest is Nanometer, micrometer, centimeter, decimeter, dekameter, kilometer.
Learn mopre about Measurement here ;
https://brainly.com/question/2734349
#SPJ1
If you have the following chemical equation and you begin balancing it as such,
C5H10 + O2 --> 5CO2 + 5H2O
How many oxygens do you have on the product side at this point in the balancing?
Answer:
15 oxygens
Explanation:
Given the partially balanced reaction: [tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \text{5C} \text{O}_{2}}+\text{5H}_\text{2}\text{O}[/tex]
The subscripts (small number to the right of each element symbol) are the number of atoms of the element within each compound/molecule, and the coefficients (numbers in front of each compound) represent the number of that molecule involved in one full reaction (if the equation were balanced).
The product side of the reaction is on the right of the arrow.
To determine the total number of Oxygens on the product side, we need to identify how many Oxygens are in each molecule (the subscript on the Oxygen), and then multiply times the number of that molecule that would be involved (Coefficient of the compound containing Oxygen). There are multiple compounds on the right side of the equation that contain Oxygen, so we'll need to add together the number of Oxygens each part contributes.
[tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}[/tex]
[tex]\text{\# reactant-side Oxygens}=\bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}\\=5 \text{ CO}_{\text{2}}\text{ molecules} *\frac{\text{2 Oxygens}}{\text{1 CO}_{\text{2}}\text{ molecule}}+5 \text{ H}_{\text{2}}\text{O molecules} *\frac{1\text{ Oxygen}}{\text{1 H}_{\text{2}}\text{O molecule}}\\=10\text{ Oxygens}+5\text{ Oxygens}\\=15\text{ Oxygens}[/tex]
What is the isomer of a compound with an empirical formula of C₂H₆O₂?
Answer:
An isomer is a molecule with the same molecular formula as another molecule, but with a different structure. Isomers contain the same number of atoms of each element, but have different arrangements of their atoms. Isomers do not necessarily share similar properties, unless they also have the same functional groups.
Which hybrid orbitals overlap to form the sigma bonds between the indicated atoms in xanthine?
Correct Answer is B
Answer:
C.) Csp² - Nsp³
Explanation:
Because the carbon has only 3 unique bonds, the conformation of the carbon should be Csp² (s + p + p). While the nitrogen also has only 3 bonds, making up 3 orbitals, it also has a lone pair of electrons. These electrons also take up one orbital. Therefore, the conformation of nitrogen is Nsp³ (s + p + p + p).
The hybrid orbitals overlap to form the sigma bonds between the indicated atoms in xanthine is Csp2 and Nsp3.
What is hybridization?Hybridization is defined as the concept of the mixing of the atomic orbitals for the formation of new hybrid orbitals which are suitable for the pairing of electrons in forming chemical bonds in valence bond theory. And the orbital formed by the hybridization are termed as hybrid orbitals.
Since the carbon atom form one single bond with hydrogen atom and one pi bond with nitrogen bond, so the conformation of carbon atom is Csp2. On the other hand, nitrogen also form one single bond and a pi bond, so it also contribute three hybrid orbital. Since it have one lone pair of nitrogen so they take one orbitals. Therefore, the conformation of nitrogen atom is Nsp3.
Thus, we concluded that the hybrid orbitals overlap to form the sigma bonds between the indicated atoms in xanthine is Csp2 and Nsp3.
learn more about hybrid orbitals:
https://brainly.com/question/24195443
#SPJ2
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
Explain how they would make solutions of the sulfuric acid at five different concentrations
The sulfuric acid can be constituted into different concentrations using distilled water as a diluent.
What is dilution of acid?Dilution of acid is defined as the decrease in the concentration of an acid using water.
For sulfuric acid to be diluted, it is slowly added to distilled water using the following guidelines:
Add 150 ml of water to the beaker and add the desired amount of acid. This will give a diluted concentration of the given acid.Learn more about acid here:
https://brainly.com/question/25148363
#SPJ1
Question 4 of 15
A compound with the empirical formula CH₂ has a molar mass of 42 g/mol. What is the molecular formula for this compound?
molecular formula:
3CH₂
Attempt 1
Incorrect
(CH₂)n=42
(14)n=42
n=3
C₃H₆
1. For CCl4, upload a photo including the following: (1) work arriving at total # valence electrons
(2) hand drawn Lewis structure (3) molecular model (4) signature(s) and (5) date.
Work arriving at total valence electrons are 24
The valence electron is an electron in the outer shell associated with an atom, and that can participate in the formation of a chemical bond
For a main-group element, a valence electron can exist only in the outermost electron shell; for a transition metal, a valence electron can also be in an inner shell.
Lewis structures, also known as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures (LEDS), are diagrams that show the bonding between atoms of a molecule, as well as the lone pairs of electrons that may exist in the molecule.
Calculating the work arrival at total valence electrons
We know 1 bond contains
2 valence electrons
Here CCl4 contains 4 bonds that is 8 valence electrons
Therefore ,
Total valence electrons are 32
Now valence electrons remain after bond formation =
32 - 8
=24 valence electrons
A molecular model is a physical model of an atomistic system that represents molecules and their processes
Molecular image and lewis hand drawn structure is as shown below
Learn more about lewis structure here
https://brainly.com/question/6224949
#SPJ10
What is the number of elements in 2Ca(OH)2
diffrentiate between equation and chemical formula
A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side with a plus sign between the entities in both the reactants and the products and an arrow that points towards the products, and shows the direction of the reaction. The coefficients next to the symbols and formulae of entities are the absolute values of the stoichiometric numbers. The first chemical equation was diagrammed by Jeen Beguin in 1615.
A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus and minus signs.
Hope this helps you!
Answer:
Explanation:
Chemical Formula:Represents the composition of a substance or compoundUses symbols and subscripts to indicate the types and numbers of atoms in a moleculeExample: H2O represents the chemical formula for waterChemical Equation:Represents a chemical reactionShows the reactants and products involved in the reactionUses chemical formulas and symbolsReactants are on the left side, products on the right side, separated by an arrowExample: 2H2 + O2 → 2H2O represents the reaction of hydrogen gas and oxygen gas to form waterIn summary:Formula describes composition, equation describes a reactionFormula uses subscripts for atom count, equation uses symbols and arrows2022
DP Chemistry Practical Guide
Dission Questions
Why are the burette and the pipette rinsed with the solution with which these are filled?
Answer:
OOO
Explanation:
OOOOOO
1) Consider this row in the periodic table. What changes can you predict based on what information is provided by the boxes for each element?
A) The elements change from solids to gases and the valence electrons decrease in number.
B) As you move across the row, the number of electrons increases and reactivity also increases.
C) They have different atomic numbers and mass numbers; they have the same number of valence electrons.
D) Both the atomic numbers and the mass numbers increase; the least reactive element is in the last box.
USA test prep question
Answer:
B) As you move across the row, the number of electrons increases and reactivity also increases.
Explanation:
The periodic table is arranged in a way that if you go across a period, the number of protons, neutrons, and electrons in an element increases. In terms of reactivity, the most reactive elements are the ones which have a high electronegativity. The electronegativity of the elements increases as you travel to the right and upwards on the periodic table.
Help please!
A new element with atomic number 116 was discovered in 2000. In 2012 it was named livermorium, Lv. Although Lv is radioactive and short-lived, its chemical properties and reactivity should follow periodic trends.
a. Determine the electron configuration for the valence electrons of Lv in the ground state. (2 pts)
b. It has been suggested that Lv can form a 4+ ion. Identify what would be the electron configuration for the valence electrons for the Lv4+ ion? (1 point)
The electronic configuration of Lv element is [tex]5f^{14} 6d^{10} 7s^2 7p^4[/tex].
The electronic configuration of [tex]Lv^{+4}[/tex] is [tex]5f^{14} 6d^{10} 7s^2[/tex] .
What is electronic configuration?Electronic configuration, also called electronic structure, is the arrangement of electrons in energy levels around an atomic nucleus.
And also the possible union with hydrogen can give two possible compounds:
[tex]LvH_2 \;or LvH_4[/tex]
This is because the Livermorio compound can have two different oxidation states with the values 2 and 4. When reacting with the hydrogen that its charge is +1, these would be the two possible equations of a client to the different oxidation states with the ones that might react Lv.
It is a synthetic chemical compound and its number in the periodic table is 116.
Learn more about electronic configuration here:
https://brainly.com/question/13497372
#SPJ1
#1
Atomic no=116
Lies ahead of Renedium -86
Electronic configuration
[Rn]5f¹⁴6d¹⁰7s²7p⁴#2
Lv^4+ means 4 electrons donated
So it gets removed from p orbital
[Rn]5f¹⁴6d¹⁰7s²
After scientists use a careful process to gather evidence and establish scientific facts, which step most likely occurs next in the scientific process? conducting experiments testing new conditions Ostudying new topics determining explanations After scientists use a careful process to gather evidence and establish scientific facts , which step most likely occurs next in the scientific process ? conducting experiments testing new conditions Ostudying new topics determining explanations
Answer:
Conducting Experiments
What is the concentration of acetic acid if three 65.0 mL samples of actic acid were neutralized with 16.8 mL, 18.2 mL, and 17.35 mL of 0.5.00 M KOH. (Hint: KOH and acetic acid react in a 1 to 1 mole ratio)
M₁V₁=M₂V₂
65 x M₁ = 16.8 x 0.5
M₁ = 0.129
65 x M₁ = 18.2 x 0.5
M₁ = 0.14
65 x M₁ = 17.35 x 0.5
M₁ = 0.133
Average = 0.129 + 0.14 + 0.133 = 0.134 M
In the following half equation, which is the oxidizing agent? How & why?
NO3- (aq) + 4H+ (aq) + 3e- —> NO (g) + 2H2O
A) NO3-
B) H+
C) e-
D) NO
E) H2O
Answer: A
Explanation:
Oxidation is the process through which electrons are gained. This indicates that only organisms on the electron side have the potential to be oxidizing agents. c, d, and e are, by definition, eliminated.
We also know that H+ is in the +1 oxidation state. The same is true for 'H' in H2O... it doesn't change oxidation states
Therefore, the answer must be a) nitrate
How many moles of O2 are consumed when 2.10 mol of magnesium burns?
1.05 moles of oxygen gas are consumed in the reaction when 2.10 mol of magnesium burns.
What are moles?A mole is defined as [tex]6.02214076 × 10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
We are given:
Moles of magnesium = 2.10 mol
For the given chemical reaction:
2Mg + O₂ → 2MgO.
By Stoichiometry of the reaction:
2 moles of magnesium react with 1 mole of oxygen gas.
So, 2.10 moles of magnesium will react with = [tex]\frac{1}{2}[/tex] X2.10 =1.05 moles
Hence, 1.05 moles of oxygen gas are consumed in the reaction.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
Explain the term 'end point'?
What do you mean by a 1.0 M solution?
Answer:
According to me end point is the end of a reaction
The absolute molar entropies of O2 and N2 are 205 J K-1 mol -1 and 192 J K-1 mol-1, respectively, at 25°C. What is the entropy of a mixture of 2.4 moles of 02 and 9.2 moles of N2 at the same temperature and pressure?
The entropy of a mixture is 96.44J K-1 mol -1
The absolute molar entropies of O2= 205 J K-1 mol -1 The absolute molar entropies of N2=192 J K-1 mol -1 Moles of O2 present(m)=2.4Moles of N2 present(n)=9.2The formula for calculating the entropy of a mixture-
Δ[tex]S_{mix} =[/tex][tex]-nR(X_{O2} ln_{XO2} +X_{N2} lnX_{N2})[/tex]
X=mole fraction
total no. of moles(t)=m + n
=2.4+9.2
=11.6 moles
now substituting the values-
entropy of mix=-11.6R(2.4/11.6 + 9.2/11.6)
=11.6R
( R=8.314 ) =11.6×8.314
=96.44J K-1 mol -1
hence, The entropy of a mixture is 96.44J K-1 mol -1
learn more about entropy here:
https://brainly.com/question/2748166
#SPJ10
What does the prefix cis-in the name of a stereoisomer indicate about the
functional groups?
Aryan want to deposit silver on an iron spoon using silver nitrate as electrolyte. Which terminal of the battery he should connect the spoon? What material should the other electrode be made of?
Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.
What is electroplating?Electroplating is a way of electrolysis, where a thin layer of metal is used to plate a determined object. It is a kinda process to purify a material you want.
The anode contains the metal you want to plate with, in this case, the Ag.
The anode contains the half-reaction of oxidation so:
Ag(s) → Ag ⁺ (aq) + e⁻
In the cathode, you have the spoon, which it takes place the half-reaction of reduction:
Ag ⁺ (aq) + e⁻ → Ag(s)
The electrolytic cell, where the redox reaction takes place, must be filled with a AgNO₃ solution.
Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.
Learn more about the electroplating here:
https://brainly.com/question/20112817
#SPJ1
How many atoms are in 2.17 moles of strontium?
Answer: I think 82.46
Explanation: The atomic number for strontium, or Sr on the periodic table, is 38. With knowing the atomic number, I multiplied that by the number of moles given.
38 × 2.17 = 82.46
I hope this helps!!
The number of atoms present in 2.17 moles of strontium are [tex]1.306774 \times 10^{24}[/tex].
An atom is the smallest indivisible unit of a chemical element that retains the chemical properties of that element. It is the basic building block of matter.
To determine the number of atoms in a given number of moles, we can use Avogadro's number, which is approximately [tex]6.022 \times 10 ^{24}[/tex] atoms per mole.
In this case, we have 2.17 moles of strontium. To find the number of atoms, we multiply the number of moles by Avogadro's number:
Number of atoms = [tex]2.17 moles\times6.022\times 10^{23}[/tex][tex]atoms/mole[/tex]
On calculating this expression:
Number of atoms =[tex]1.306774 \times 10^{24}[/tex]
Therefore, there are approximately [tex]1.306774 \times 10^{24}[/tex] atoms in 2.17 moles of strontium.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ2
Convert -145 °F to kelvins. Round to the nearest whole number.
Answer:
175K
Explanation:
(-145°F − 32) × 5/9 + 273.15 = 174.817K
174.817 ---> 175 (Rounded to whole number/ ones place)
Barium nitrate (Ba(NO3)2) reacts with sodium chloride (NaCl) in a double replacement (displacement) reaction, shown below.
Ba(NO3)2(aq)+NaCl(aq)-->???
How many grams of barium salt are produced when a solution containing 21.7 g of Barium nitrate is mixed with a solution containing excess sodium chloride?
Use 261.34 as the molar mass for barium nitrate. Round to three significant digits.
Answer:
you know that they will be a displacement reaction that will form a barium salt:
Ba(NO3)2+ 2NaCl--> BaCl2 + 2NaNO3
So now that we have that formula and the molecular weight we can determine how much salt will be made. So here we convert the grams to moles
(42.3g Ba(NO3)2)*(1 mole/261.34g) = 0.16185 mol
In the molecular formula we know that 1 mole of Barium nitrate will create 1 mole of Barium chloride, so in this case (in a perfect world) you should get 0.16185 mole of barium chloride (208.23 g/mol) that we then have to convert to grams.
(0.16185 mol BaCl2) * ( 208.23 g/mol) = 33.7037 g of Barium Chloride (rounded to 3 significant digits = 33.7g)
acid base and solutions
The Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.
What is the Arrhenius definition of acid?The definition of solutions was more given by the traditional scientist in smart solutions, which are natural solutions, like substances that - easy solutions, aqueous like bases.
In this case, Arrhenius definition of an acid states that an acid ionizes or dissociates to from hydroxide ions in solution.
See more about Arrhenius definition at brainly.com/question/13184258
#SPJ1
Write and balance the equation for the combustion of the fatty acid lauric acid, (C12H24O2)
.
Express your answer as a chemical equation. Identify all of the phases in your answer.
The combustion of lauric acid is shown as CH3(CH2)10COOH(s) + 18O2(g) -----> 12H20(l) + 12CO2(g)
What is combustion?In a combustion reaction, a substance is burnt in oxygen. If the substance is an organic compound a the case is here, the products are carbon dioxide and hydrogen.
No the equation of the combustion of lauric acid is shown as;
CH3(CH2)10COOH(s) + 18O2(g) -----> 12H20(l) + 12CO2(g)
Learn more about combustion:https://brainly.com/question/15117038?
#SPJ1
what's the name of the compound?
You are watching tv and you see something on the corner of your eye what do you do and you're home alone
Talk to the doctor if you see something in the corner of your eye.
What is a visual hallucination?Visual hallucinations involve seeing things that aren't there.
It's called a visual hallucination, and it can seem like your mind is playing tricks on you. Beyond being scary or stressful, it's also usually a sign that something else is going on.
So if it's happening to you, talk to your doctor. That's the first step toward getting better.
Learn more about visual hallucinations here:
https://brainly.com/question/23288916
#SPJ1
A tank holds 22.1 L of oxygen ( O2 ) at a pressure of 18.0 atm . What is the final volume, in liters, of this gas when it is released at a pressure of 2.90 atm with no change in temperature and amount of gas.
The final volume of gas will be 137.17L .
According to ideal gas equation , PV=nRT , where P is pressure of gas , V is volume of gas , n is moles of gas , R is universal gas constant and T is the temprature of gas.
Now , according to the que at initial and final stage the temprature and amount of gas stays constant , so we would simply equate the initial PV to the final PV.
⇒[tex]P_{i} V_{i} = P_{f} V_{f} \\[/tex]
where [tex]P_{i}[/tex] ans [tex]V_{i}[/tex] are the initial pressure and volume of the gas and [tex]P_{f}[/tex] and [tex]V_{f}[/tex] are the final pressure and volume of the gas .
Here we have to find final volume of gas .
So , putting all values in above eq we get
18 x 22.1 = 2.9 x [tex]V_{f}[/tex]
⇒ [tex]V_{f}[/tex] = 137.17 L
Learn more about ideal gas equation here https://brainly.com/question/25290815
#SPJ10
