Answer:
7
Explanation:
The light travels a total of 4 cm to the screen, of that, 3 cm is in air and 1 cm is in the glass plate.
The total number of wavelengths of light between the source and screen is just the number of wavelengths in air plus the number in the glass.
To determine the number of wavelengths in air, divide the thickness of air (3 cm) by the wavelength of the light (6000 Angstroms), converting units as needed.
The refractive index of the glass is 1.5. That means that the velocity of propagation of the light in the glass is 2/3 of what it is in air, and so the wavelength of the light in glass is 2/3 of what it is in air. So, divide the thickness of glass (1 cm) by the wavelength of the light in glass (6000 * 2/3).
Add the two values for the final answer
Two ice skaters, with masses of 40.0 kg and 65.0 kg , are at the center of a 50.0 m -diameter circular rink. The skaters push off against each other and glide to opposite edges of the rink. Part A If the heavier skater reaches the edge in 10.0 s , how long does the lighter skater take to reach the edge
Answer:
6.15 s
Explanation:
From the question,
Applying the law of conservation of momentum
Momentum of the Heavier skater = Momentum of the lighter skater.
Mv = mV................. Equation 1
Where M = mass of the heavier skater, m = mass of the lighter skater, v = Velocity of heavier skater, V = velocity of the lighter skater.
But,
v = r/t........................ Equation 2
V = r/t'................ Equation 3
Where r = radius of the circular rink, t = time taken for the heavier skater to reach the edge, t' = time taken for the lighter skater to reach the edge.
Substitute equation 2 and equation 3 into equation 1
M(r/t) = m(r/t')............. Equation 4
Given: M = 65 kg, m = 40 kg, r = 50/2 = 25 m, t = 10 s.
Substitute into equation 4 and solve for t'
65(25/10) = 40(25/t')
162.5 = 1000/t'
t' = 1000/162.5
t' = 6.15 seconds
Fizik
Dua perintang 5 Ω dan 10 Ω disambung selari dengan 9 V bekalan kuasa. Kira kuasa output bekalan kuasa.
Answer:
P = 24.32 W
Explanation:
The question is, "Two resistors 5 Ω and 10 Ω are connected in parallel with a 9 V power supply. Calculate the output power of the power supply.".
The voltage of the power supply, V = 9 V
Resistor 1, R₁ = 5 Ω
R₂ = 10 Ω
The equivalent of parallel combination of resistors is given by :
[tex]\dfrac{1}{R_{eq}}=\dfrac{1}{R_1}+\dfrac{1}{R_2}\\\\\dfrac{1}{R_{eq}}=\dfrac{1}{5}+\dfrac{1}{10}\\\\R_{eq}=3.33\ \Omega[/tex]
The power of the output is given by :
[tex]P=\dfrac{V^2}{R_{eq}}\\\\=\dfrac{9^2}{3.33}\\\\P=24.32\ W[/tex]
So, the output power is equal to 24.32 W.
What do microwaves have In common with light waves?
Answer:
Both are electromagnetic waves
Explanation:
Hope this helped!!
A magnetic field is passing through a loop of wire whose area is 0.026 m2. The direction of the magnetic field is parallel to the normal to the loop, and the magnitude of the field is increasing at the rate of 0.24 T/s. (a) Determine the magnitude of the emf induced in the loop. (b) Suppose the area of the loop can be enlarged or shrunk. If the magnetic field is increasing as in part
Answer:
a) 6.24 × 10⁻³ V
b) 4.16 × 10⁻³ m²/s
Explanation:
Given that:
(a)
Area A = 0.026 m²
[tex]\dfrac{dB}{dt}=0.24 \ T/s[/tex]
[tex]e=\dfrac{d\phi}{dt} \\ \\ = \dfrac{d}{dt}(BA) \\ \\ =A\dfrac{dB}{dt} \\\\= 0.026 \times 0.24 \\ \\ = 0.00624\ V \\ \\ \mathbf{= 6.24 \times 10^{-3} \ V}[/tex]
(b)
[tex]Here; \\ \\ e =0\\\\ \dfrac{d}{dt}(BA) =0 \\ \\ \implies B\dfrac{dA}{dt}+ A\dfrac{dB}{dt} = 0 \\ \\ B\dfrac{dA}{dt}= -A\dfrac{dB}{dt} \\ \\ \dfrac{dA}{dt}= -\dfrac{A}{B} \dfrac{dB}{dt} \\ \\ = -\dfrac{0.026}{1.5}\times 0.24 \\ \\ \dfrac{dA}{dt}= 4.16 \times 10^{-3}\ m^2/s[/tex]
You leave a pastry in the refrigerator on a plate and ask your roommate to take it out before youget home so you can eat it at room temperature, the way you like it. Instead, your roommateplays video games for hours. When you return, you notice that the pastry is still cold, but thegame console has become hot. Annoyed, and knowing that the pastry will not be good if it ismicrowaved, you warm up the pastry by unplugging the console and putting it in a clean trashbag (which acts as a perfect calorimeter) with the pastry on the plate. After a while, you find thatthe equilibrium temperature is a nice, warmTeq.. You know that the game console has a mass ofm1. Approximate it as having a uniform initial temperature ofT1. The pastry has a mass ofm2and a specific heat ofc2, and is at a uniform initial temperature ofT2. The plate is at the sameinitial temperature and has a mass ofm3and a specific heat ofc3. What is the specific heat ofthe console
Answer:
[tex]c_{e1} = \frac{(m_2 c_{e2} \ + m_3 c_{e3} ) \ (T_{Teq} - T_2) }{m_1 (T_1 - T_{eq}) }[/tex]
Explanation:
This is a calorimeter problem where the heat released by the console is equal to the heat absorbed by the cupcake and the plate.
Q_c = Q_{abs}
where the heat is given by the expression
Q = m c_e ΔT
m₁ c_{e1) (T₁-T_{eq}) = m₂ c_{e2} (T_{eq} -T₂) + m₃ c_{e3} (T_{eq}- T₁)
note that the temperature variations have been placed so that they have been positive
They ask us for the specific heat of the console
[tex]c_{e1} = \frac{(m_2 c_{e2} \ + m_3 c_{e3} ) \ (T_{Teq} - T_2) }{m_1 (T_1 - T_{eq}) }[/tex]
5. If employers-want-union workers to return to work, they can ask the
court for an __
Answer:
they can asked to sue
Explanation:
bud
If I have an object with a 6.0 µC charge , and another with a -2.0 µC charge, when they touch how do I find the new charges
When charged objects touch, you can assume that the charges move between the objects, so that the total amount of charge doesn't change but it splits equally between the two objects.
-- like two water tanks standing next to each other, with a different amount of water in each one. When you connect a pipe between their bottoms, some water flows across until the LEVEL of water is the same in both tanks.
-- like one hard full balloon and one soft mooshy balloon. When you connect them together, some air flows from the hard balloon into the soft balloon, until the pressure of air is the same in both balloons.
The total amount of charge on your two objects is (+6.0 μC - 2.0 μC). That's +4.0 μC .
When they touch, charges move around until the charge is the same on both objects . . . +2 μC.
8. Before leaving the ground an airplane traveling with constant acceleration makes a run on the
runway of 1800 meters in 12 seconds. Determine:
a. Acceleration
b. Speed at which it leaves the ground
c. Distance traveled during the first and twelfth seconds
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
B. Speed at which it leaves the ground1. Swordfish are capable of stunning output power for short bursts. A 650 kg swordfish has a cross-sectional area of 0.92 m2 and a drag coefficient of 0.0091- very low due to some evolutionary adaptations. Such a fish can sustain a speed of 30 m/s for a few seconds. Assume seawater has a density of 1026 kg/m3. a) How much power does the fish need to put out for motion at this high speed
Answer:
[tex]P_{sp}=178.4W/kg[/tex]
Explanation:
From the question we are told that:
Mass of fish [tex]m_f=650kg[/tex]
Cross-sectional area [tex]A=0.92 m^2[/tex]
Drag coefficient of [tex]\mu= 0.0091[/tex]
Seawater density [tex]\rho= 1026 kg/m^3.[/tex]
Speed of Fish [tex]v=30 m/s[/tex]
Generally the equation for Drag force F_d is mathematically given by
[tex]F_d = \mu * \rho *A v^2 /2[/tex]
[tex]F_d = 0.0091* 0.92* 1026* 30^2/2 \\F_d= 3865. 35 N[/tex]
Generally the equation for high speed Power [tex]P_{sp}[/tex] is mathematically given by
[tex]P_{sp}=3865*35*\frac{v}{m_f}[/tex]
[tex]P_{sp}=F_d*35*\frac{30}{650}[/tex]
[tex]P_{sp}=178.4W/kg[/tex]
Speed and time play a major factor in:
Scrimmage
Tactical movement
Situation awareness
Drill
Answer:
Tactical movement
Explanation:
Speed and time play a significant factor in Tactical movement. The correct option is B.
What is a Tactical movement?Tactical movement refers to the coordinated and strategic movement of military units or teams to achieve a specific objective. It is a fundamental aspect of military operations and involves the use of various tactics and techniques to move troops and equipment safely and efficiently on the battlefield.
Tactical movement can involve various modes of transportation, such as on foot, in vehicles, or by air. It also involves the use of cover and concealment to avoid detection by the enemy, and the use of communication and signal systems to coordinate movements and maintain situational awareness.
The success of the tactical movement depends on many factors, including the terrain and weather conditions, the size and composition of the units involved, the available resources and equipment, and the tactics and strategies employed by both friendly and enemy forces. It requires careful planning, training, and execution to ensure that the movement is successful and achieves the desired outcome.So, tactical movement is an essential component of military operations, and plays a critical role in achieving victory on the battlefield.
Here in the Question,
Tactical movement refers to the movement of military units or teams in a coordinated and strategic manner to achieve a specific objective. In such movements, speed and time are critical factors because they determine the success or failure of the mission. The speed of movement can help to surprise the enemy, take advantage of a weakness in their defense, or seize a key position before they can respond. Time is also important because the longer it takes to achieve the objective, the more likely the enemy is to detect and counter the movement. Therefore, tactical movement requires careful planning and execution to ensure that the right units move at the right speed and at the right time to achieve the desired outcome.
Therefore, the correct option is B i.e Tactical movement.
To learn about Kinetic energy click:
https://brainly.com/question/26472013
#SPJ2
A container in the shape of a cube 11.6 cm on each edge contains air (with equivalent molar mass 28.9 g/mol) at atmospheric pressure and temperature 291 K. (a) Find the mass of the gas. kg (b) Find the gravitational force exerted on it. mN (c) Find the force it exerts on each face of the cube. kN (d) Why does such a small sample exert such a great force
Answer:
a. 0.00189 kg
b. 18.552 mN
c. 1.363 kN
d. Since the molecular density is high, the force exerted by the sample is thus high.
Explanation:
(a) Find the mass of the gas. kg
Using PV = mRT/M where P = pressure on gas = atmospheric pressure = 1.013 × 10⁵ Pa, V = volume of gas = L³ where L = length of cube = 11.6 cm = 0.116 cm,m = mas of gas, R = molar gas constant = 8.314 J/mol-K, T = temperature of gas = 291 K and M = molar mass of gas = 28.9 g/mol
So, m = PVM/RT = PL³M/RT
Substituting the values of the variables into the equation, we have
m = PL³M/RT
= 1.013 × 10⁵ Pa × (0.116)³ × 28.9 g/mol/ 8.314 J/mol-K × 291 K
= 0.0457 × 10⁵ Pa g/mol/2419.374J/mol
= 1.89 × 10⁻⁵ × 10⁵ g
= 1.89 g
= 1.89 × 10⁻³kg
= 0.00189 kg
(b) Find the gravitational force exerted on it. mN
The gravitational force, F exerted on it is its weight W
So, F = W = mg where m = mass of gas = 1.89 × 10⁻³ kg and g = acceleration due to gravity = 9.8 m/s²
F = mg
= 1.89 × 10⁻³ kg × 9.8 m/s²
= 18.522 × 10⁻³ kgm/s²
= 18.552 × 10⁻³ N
= 18.552 mN
(c) Find the force it exerts on each face of the cube. kN
Since pressure, P = F/A where F = force exerted on each face and A = area of each face = L² where L = length of side of cube = 11.6 cm = 0.116 m
So, F = PA since P = atmospheric pressure = 1.013 × 10⁵ Pa,
F = PL²
= 1.013 × 10⁵ Pa (0.116 m)²
= 0.01363 × 10⁵ N
= 1.363 × 10³ N
= 1.363 kN
(d) Why does such a small sample exert such a great force
To answer this question, we need to find the density of the gas in the cube.
So density of gas,ρ = m/V where m = mass of gas = 1.89 g and V = volume of gas = L³ and L = length of side of cube = 11.6 cm
ρ = m/V = m/L³ = 1.89 g/(11.6 cm)³ = 1.89 g/1560.896 cm³ = 0.00121 g/cm³
We now find the number of moles of gas in a cm³ by dividing its density by its molar mass.
So n = ρ/M = 0.00121 g/cm³ ÷ 28.9 g/mol = 23687.67 mol/cm³
Since there are 6.022 × 10²³/mol, we find the number of molecules in a cm³ which is n × 6.022 × 10²³/mol = 23687.67 mol/cm³ × 6.022 × 10²³/mol
= 143731.1 × 10²³ molecules/cm³
= 1.437311 × 10²⁸ molecules/cm³
≅ 1.44 × 10²⁸ molecules/cm³
Since the molecular density is high, the force exerted by the sample is thus high.
A molecule with a charge of 9 x 10-8 C is moving with a velocity of 7 x 107 m/s perpendicular to a magnetic field with a value of 0.57 Tesla. What is the magnitude force (in N) on the molecule?
Answer:
3.591 N
Explanation:
Applying,
F = Bvq................. Equation 1
Where F = magnitude of force on the molecule, B = Magnetic field, v = Velocity of the molecule, q = charge of the molecule.
From the question,
Given: B = 0.57 Tesla, q = 9×10⁻⁸ C, v = 7×10⁷ m/s
Substitute these values into equation 1
F = 0.57×9×10⁻⁸×7×10⁷
F = 35.91×10⁻¹
F = 3.591 N
Hence the force on the molecule is 3.591 N
What keeps the Earth's atmosphere from floating away? Earth's gravity keeps the air molecules of the atmosphere from escaping the area surround Earth The attraction between the different molecules of atmospheric gases The temperature of the gas is not high enough to allow it to spread out and escape the area surrounding Earth The differentiation between temperatures of the Earth and outer space traps the gases in the atmosphere
Answer: it is the earth gravity :’)
Explanation:
Earth's gravity keeps the air molecules of the atmosphere from escaping the area surround Earth
• What value is used to identify each element in the periodic table?
Answer:
protons
Explanation:
what is the planet that scientists are exploring now?
Answer:
Mars
Explanation:
In the 1960s, humans set out to discover what the red planet has to teach us. Now, NASA is hoping to land the first humans on Mars by the 2030s. Mars has captivated humans since we first set eyes on it as a star-like object in the night sky.
good luck
please mark me as a brainliest
One of the scientists suggests that he can build a
cooling system for the theoretical photovoltaic cells
Experiment 2, which will keep the cells 1°C cooler
dan normal but decrease their efficiency by 1%. The
teoretical photovoltaic cells capturing which frequency
ranges
, if any, would benefit from this cooling system?
Answer: SORRY
SORRY AM DOING IT FOR POINTS
Explanation:
Which point on the standing wave is a node?
The point on the standing wave which is referred to as a node is point B and is denoted as option B.
What is Standing wave?This is also called stationary wave and it is referred to as a combination of two waves moving in opposite directions, each having the same amplitude and frequency.
A node is referred to as a point along a standing wave where the wave has minimum amplitude which is therefore denoted as point B in the graph given below.
Read more about Amplitude here https://brainly.com/question/19036728
#SPJ1
Moira is experiencing noticeable memory loss, muscle loss, and bone loss. What age group is Moira most likely in?
adolescence
early adulthood
middle adulthood
late adulthood
Answer:
Late adulthood
Explanation:
Just did it :)
Approximate the human form as an unclothed vertical cylinder of 0.3 m diameter and 1.75 m length with a surface temperature of 30 oC.(a)Calculate the heat loss in a 10 m/s wind at 20 oC.(b)What is the heat loss if the skin is covered with a thin layer of water (i.e., sweat) at 30 oC and the relative humidity of the air is 60 %
Answer:
[tex]q=1118.865W[/tex]
Explanation:
From the question we are told that
Diameter of the cylinder [tex]D=0.3m[/tex]
Length of the cylinder [tex]L=1.75m[/tex]
Surface temperature of cylinder [tex]T_s=30 \textdegree C=303k[/tex]
Speed of air [tex]V=10m/s[/tex]
Temperature of air [tex]T=20 \textdegree C[/tex]
Generally the equation for Reynolds number is mathematically given by
[tex]Re_D=\frac{VD}{v}[/tex]
where
[tex]v=15.27*10^-^6[/tex]
[tex]Re_D=\frac{10*0.3}{15.27*10^-^6}[/tex]
[tex]Re_D=1.96*10^5[/tex]
Generally the equation for Nusselt number is mathematically given by
[tex]N_u=0.6(Re_D)^{0.6}(Pr)^{0.37}[/tex]
where
Prandtl number
[tex]Pr=0.71[/tex]
[tex]N_u=0.6(Re_D)^{0.6}(Pr)^{0.37}[/tex]
[tex]N_u=0.6(1.96*10^5)^{0.6}(0.71)^{0.37}[/tex]
[tex]N_u=791.53[/tex]
Generally the equation for convective heat transfer is mathematically given by
[tex]h=Nu \frac{k}{D}[/tex]
where
[tex]k=25.7*10^{-3}[/tex]
[tex]h=791.53*\frac{25.7*10^{-3}}{0.3}[/tex]
[tex]h=67.81W/m^2K[/tex]
Generally the equation for surface area of a cylinder is mathematically given by
[tex]A=\pi DL[/tex]
[tex]A=\pi *0.3*1.75[/tex]
[tex]A=1.65m^2[/tex]
Generally the equation for convective heat transfer is mathematically given by
[tex]q=h4(T_s-T_{inty)}[/tex]
[tex]q=(67.81)*1.65*(30-20)\\[/tex]
[tex]q=1118.865W[/tex]
Why is this true? Why is this true? Photons of lower-frequency light don't have enough energy to eject an electron. The electric field of low-frequency light does not vibrate the electrons rapidly enough to eject them. The number of photons in low-frequency light is too small to eject electrons. Low-frequency light does not penetrate far enough into the metal to eject electrons. Request Answer
Answer:
the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
Explanation:
This question is in the model of the photoelectric effect, where some electrons are expelled from the metal by the action of a ray of light.
This effect was explained by Einstein supposes that the light rays are formed by photons and the energy of these photons is given by the Planco relation
K = h f - Ф
where K is the kinetic energy of the ejected electrons and Ф is the work function, it keeps the electrons inside the material.
When analyzing this expression there is a minimum frequency (threshold) for which K = 0
hf = Ф
Below this frequency the photons in the light beam do not have the energy to expel the electrons from the material.
Let's examine the answers
a) True. You agree with the above
b) False. The analysis is in terms of individual shock
c) False. The expulsion does not have to do with the number of photons but with the energy of each one
therefore the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
41. 2072 Set E Q.No. 11 A source of sound produces a note of
512 Hz in air at 17°C with wavelength 66.5 cm. Find the ratio
of molar heat capacities at constant pressure to constant
volume at NTP. Densities of air and mercury at NTP are
1.293 kg/m3 and 13600 kg/m3 respectively.
Ans: 1.36
Choose a tool or a device you can investigate. It must not have any source of power other than the person using it. It must use one or more of the six simple machines. Explain how the tool or device is used. What work does a person do while using it? What kind of motion do we see when it’s used?
Answer:
Wheelbarrows, fishing rods, shovels, brooms, arms, legs, boat oars, crow bars, and bottle openers are all examples of levers. Levers may be one of the most used simple machine. As with all simple machines like the lever, they are designed to help make work easier to do.
Explanation:
Answer:
Wheelbarrows- This tool/device is used for a variety of things, such as moving rock, mulch or compost to the garden, moving trees or large shrubs from one spot to another, hauling bricks, disposing of garden debris, for mixing concrete or fertilizers, and even used on farms for mucking horse stalls. The work you do is pushing it whcih also goes along with the montion you will see, forward motion.
Explanation:
Which is not a component of an electromagnet?
A. solenoid
B. power source
C. ferromagnetic core
D. permanent magnet
4. How does the changing volume of the air inside the balloon affect the density
Answer:
please give me brainlist and follow
Explanation:
Since density is described as mass divided by volume, as volume decreases, density increases. With enough drop in volume, the helium balloon becomes too dense to float.
Lithium was one of the metals studied by the American physicist Robert Millikan in his research on the photoelectric effect. When illuminated with blue light of frequency 6.64 x 10" Hz, the photoelectrons ejected from a lithium surface have a maximum kinetic energy of 0.332 eV. What is the threshold frequency for lithium? For this problem, let the value of Planck's constant, h, be 6.63 x 10J's
Answer:
f = 7.9487 10¹³ Hz
Explanation:
The photoelectric effect was correctly explained by Einstein assuming that the radiation is composed of photons, which behave like particles.
hf = K + Ф
It indicates the frequency and the kinetic energy, let's look for the work function
Ф = hf - K
let's reduce the magnitudes to the SI system
K = 0.332 eV (1.6 10⁻¹⁹ J / 1 eV) = 0.5312 10⁻⁻¹⁹ J
let's calculate
Ф = 6.63 10⁻⁻³⁴ 6.64 10¹¹ - 0.5312 10⁻¹⁹
Ф = 4.40 10⁻²² - 0.5312 10⁻¹⁹
Ф = 5.27 10⁻²⁰ J
for the minimum frequency that produces photoelectrons, the kinetic energy is zero
hf = Ф
f = Ф / h
f = 5.27 10⁻²⁰ / 6.63 10⁻³⁴
f = 7.9487 10¹³ Hz
what is a black hole what does it do
Answer:
What's a black hole?=> Black holes are points in space that are so dense they create deep gravity sinks. Beyond a certain region, not even light can escape the powerful tug of a black hole's gravity.
What does it do?=> Anything that ventures too close—be it star, planet, or spacecraft—will be stretched and compressed like putty in a theoretical process aptly known as spaghettification.
[tex] \infty \infty [/tex]
You and a friend are playing with a bowling ball to demonstrate some ideas of Rotational Physics. First, though, you want to calculate the Rotational Kinetic Energy of the bowling ball as it rolls down a sidewalk without slipping. This means it has both linear kinetic energy and rotational kinetic energy. A bowling ball can be modeled as a solid sphere rotating about its center. This bowling ball has a mass of 6.40 kg and a radius of 0.130 m. You'll need to look up the equation for the Moment of Inertia in your textbook. It is rotating with an angular velocity of 16.0 radians / second in the counter-clockwise (or positive) direction. You can use this to determine the linear velocity of the bowling ball (since it is rolling without slipping). What is the Total Kinetic Energy of the bowling ball
Answer:
K_{total} = 19.4 J
Explanation:
The total kinetic energy that is formed by the linear part and the rotational part is requested
[tex]K_{total} = K_{traslation} + K_{rotation}[/tex]
let's look for each energy
linear
[tex]K_{traslation}[/tex] = ½ m v²
rotation
[tex]K_{rotation}[/tex] = ½ I w²
the moment of inertia of a solid sphere is
I = 2/5 m r²
we substitute
[tex]K_{total}[/tex] = ½ mv² + ½ I w²
angular and linear velocity are related
v = w r
we substitute
K_{total} = ½ m w² r² + ½ (2/5 m r²) w²
K_{total} = m w² r² (½ + 1/5)
K_{total} = [tex]\frac{7}{10}[/tex] m w² r²
let's calculate
K_{total} = [tex]\frac{7}{10}[/tex] 6.40 16.0² 0.130²
K_{total} = 19.4 J
3. An airplane is flying at 10 km altitude in the standard atmosphere. The internal pressure of the aircraft interior is 100 kPa. Estimate the outward force on the window. The window is flat and has an elliptical shape with lengths of 300 mm along the major axis and 200 mm along the minor axis.
Answer:
The correct response will be "13.755 kN".
Explanation:
According to the question,
The given values are:
a = 300 mm
i.e.,
= 0.3 cm
b = 200 mm
i.e.,
= 0.2 dm
Internal pressure,
[tex]P_{in}=100[/tex]
Now,
The area of the elliptical shape window will be:
⇒ [tex]A = \pi ab[/tex]
On substituting the values, we get
⇒ [tex]=3.14\times 0.300\times 0.200[/tex]
⇒ [tex]=0.1885 \ m^2[/tex]
By using the table,
At 10 km, the atmospheric pressure will be
⇒ [tex]p_o=27.03 \ kPa[/tex]
Now,
The outward force will be:
⇒ [tex]F_{net}=p_{in}A-p_{0}A[/tex]
⇒ [tex]=(p_{in}-p_{0})A[/tex]
⇒ [tex]=(100-27.03)\times (0.1885)[/tex]
⇒ [tex]=13.755 \ kN[/tex]
An explosive eruption by a single volcano can affect
OA. only the lifeforms living on the volcano.
OB. only the lifeforms living on the same continetu
OC. lifeforms throughout the world.
OD. Earth's climate but not its lifeforms.
HELP PLEASEEEEEEEEEEE
Answer:
dolphin and wolf
Explanation:
the sharks jaw is way to small for it and is shaped differently
