12 - 3 RNA and Protein Synthesis: Key Concept - List the three main types of RNA.

Answers

Answer 1

The three main types of RNA are mRNA, rRNA, and tRNA.

All living cells contain ribonucleic acid, a nucleic acid that resembles DNA in structure. However, RNA is typically single-stranded, unlike DNA. Instead of the deoxyribose present in DNA, the backbone of an RNA molecule is made up of alternating phosphate groups and the sugar ribose.

The instructions are transported from the nucleus to the cytoplasm by messenger RNA (mRNA). All RNAs, including mRNA, are created in the nucleus.

Ribosomal RNA (rRNA) and transfer RNA (tRNA), the other two types of RNA, are involved in the process of organizing the amino acids to create the protein.

Learn more about RNA at:

brainly.com/question/13631966

#SPJ4


Related Questions

when phosphate levels are low, what happens in the kidney?

Answers

When phosphate levels are low, the kidneys play an important role in regulating the body's phosphate balance.

Decreasing phosphate excretion: When phosphate levels are low, the kidneys reduce the amount of phosphate excreted in urine. This is achieved by decreasing the filtration rate of phosphate in the kidneys and by increasing the reabsorption of phosphate from the urine back into the bloodstream.

Activating vitamin D: Low phosphate levels can stimulate the kidneys to activate vitamin D, which helps to increase the absorption of calcium and phosphate from the intestines. This can help to maintain normal phosphate levels in the blood.

Increasing parathyroid hormone (PTH) secretion: Low phosphate levels can also stimulate the secretion of PTH from the parathyroid glands. PTH helps to increase the reabsorption of calcium and phosphate from bones into the bloodstream, which can help to maintain normal phosphate levels in the blood.

To know more about phosphate balance here

https://brainly.com/question/23214694

#SPJ4

Explain how an mRNA moleculecan remain attached to theER membrane while individual ribosomes translating it are released and rejoin the cytosolic pool of ribosomes after each round of translation.

Answers

In eukaryotic cells, ribosomes bind to an mRNA molecule during translation to start the production of proteins.

If the mRNA specifies a protein that will be secreted, the ribosome that will carry out the translation will be directed to the membrane of the endoplasmic reticulum (ER), where it will stay until the protein is entirely produced.

When the protein is finished, it is either inserted into the membrane or discharged into the ER lumen. However, the ribosome is not permanently affixed to the ER membrane.

As an alternative, it is discharged and re-enters the cytosolic pool of ribosomes, where it can start the translation of another mRNA molecule. A signal sequence at the amino terminus of the protein being made is what keeps the mRNA molecule bound to the ER membrane.

Learn more about Ribosomes

https://brainly.com/question/241631

#SPJ4

WAD: Cervical Facet Joint Injuries- with injuries to the facet joints, and given its nerve supply (medial branch of dorsal ramus), common pain patterns are identified, most centered around the ________ border

Answers

The most common pain pattern associated with cervical facet joint injuries is located on the posterior border of the neck.

This is because the medial branch of the dorsal ramus, the nerve supply for the facet joints, also innervates the trapezius and levator scapulae in the posterior neck.

These injuries typically cause pain that is felt on the back of the neck and that travels down the arms and into the hands and fingers. The shoulders and the area in between the shoulder blades might also be painful.

This kind of discomfort can be accompanied by burning, numbness, and tingling, and is made worse by specific movements such rotating the head or neck.

Since the pain from the injury has the potential to worsen and significantly lower a person's quality of life, it is crucial that it is properly identified and treated.

Complete Question:

WAD: Cervical Facet Joint Injuries- with injuries to the facet joints, and given its nerve supply (medial branch of dorsal ramus), common pain patterns are identified, most centered around the _________ border of the neck.

To learn more about trapezius visit:

https://brainly.com/question/25478395

#SPJ4

what happens to the 4 carbon malate molecule produced in CAM photosynthesis?

Answers

The malate then exits the mesophyll cells and enters the chloroplasts of specialized cells called bundle sheath cells.

H

ere the four-carbon malate is decarboxylated to produce CO 2, a three-carbon compound called pyruvate, and NADPH.

what did calculated translocation speed suggest?
0.5-1 mh-1

Answers

The calculated translocation speed of 0.5-1 mh-1 suggested that the movement of the substance being studied (e.g. nutrient, protein, or RNA) was relatively slow.

Translocation refers to the movement of a substance from one part of a plant or organism to another. In biological research, translocation speed can be calculated by tracking the movement of a labeled substance over time and measuring the distance it travels.

The calculated translocation speed of 0.5-1 mh-1 (meters per hour) suggests that the movement of the substance being studied was relatively slow. This speed could have important implications for understanding the physiological processes involved in plant growth, nutrient uptake, or signaling between cells.

However, it is important to note that the actual speed of translocation can vary depending on many factors, such as the type of substance being transported, the structure of the plant or organism, and the environmental conditions. Therefore, additional experiments and measurements may be needed to confirm and refine the estimated translocation speed.

To learn more about translocation speed, here

https://brainly.com/question/6198529

#SPJ4

Formula for ideal Fast Plants environment:

Answers

The ideal environment for Fast Plants can vary depending on the growth stage and desired outcome. General factors to consider for optimal growth include: Temperature, Light, Humidity ,Water & Nutrients.

Temperature: Fast Plants grow best in temperatures between 20-25°C (68-77°F).

Light: Fast Plants require high-intensity light for optimal growth. Ideally, they should receive 16-18 hours of light per day, with an intensity of 300-500 μmol m-2 s-1.

Humidity: Fast Plants prefer a relative humidity of 40-60%.

Water: Fast Plants require regular watering to keep the soil moist but not waterlogged. Watering should be done from the bottom of the pot to avoid getting water on the leaves.

Nutrients: Fast Plants require a balanced nutrient solution that contains nitrogen, phosphorus, potassium, and other micronutrients. The nutrient solution should be adjusted according to the growth stage of the plant.

By maintaining these ideal conditions, Fast Plants can grow quickly and produce a high yield, making them useful for teaching and research purposes.

To learn more about micronutrients

https://brainly.com/question/8492704

#SPJ4

which pathway would be most important to produce sugars required in high concentration in advance of mitosis? a. pentose phosphate, oxidative phase b. gluconeogenesis c. lactate fermentation d. pentose phosphate, nonoxidative phase e. none would contribute the specific sugars required in advance of mitosis.

Answers

A. Pentose phosphate . Hope this helps :)

in C4 photosynthesis, CO2 + PEP in the presence of PEP carboxylase makes _____ at the mesophyll cell

Answers

In C4 photosynthesis, CO2 + PEP in the presence of PEP carboxylase makes oxaloacetate at the mesophyll cell.

In C4 photosynthesis, the enzyme PEP carboxylase first combines CO2 and phosphoenolpyruvate (PEP) to create oxaloacetate (OAA) in the mesophyll cells. High CO2 and low O2 concentrations are necessary for this reaction to take place.

The four-carbon molecule OAA is transformed into the transportable compound's malate or aspartate, which can enter bundle-sheath cells. The C4 route is a cycle in which the emitted CO2 is recycled back to the mesophyll cells where it is used once again in the PEP process.

The malate or aspartate is decarboxylated once within the bundle-sheath cells to release CO2, which is subsequently utilized in the Calvin cycle to create glucose.

Learn more about Oxaloacetate

https://brainly.com/question/25735714

#SPJ4

Why can the binding of oxygen to hemoglobin be cooperative while the binding of oxygen to myoglobin can not?

Answers

The binding of oxygen to hemoglobin can be cooperative while the binding of oxygen to myoglobin cannot because of the differences in their structures and functions.

Hemoglobin is a tetrameric protein composed of four subunits, while myoglobin is a monomeric protein with only one subunit. The cooperative binding of oxygen to hemoglobin occurs due to the interactions between these four subunits.

The binding of oxygen to hemoglobin can be cooperative because hemoglobin is a complex protein made up of four subunits. When one subunit of hemoglobin binds to oxygen, it undergoes a conformational change that makes it easier for the other subunits to also bind oxygen. This process is called positive cooperativity and results in the efficient transport of oxygen by hemoglobin from the lungs to the tissues.

In contrast, myoglobin is a single-subunit protein that binds to oxygen in a non-cooperative manner. This is because myoglobin does not undergo the same conformational changes as hemoglobin when it binds to oxygen. Instead, myoglobin has a higher affinity for oxygen than hemoglobin, which allows it to store oxygen in muscle tissues for use during periods of low oxygen availability.

To know more about hemoglobin refer here :

https://brainly.com/question/30507215

#SPJ11

The genes for hemophilia, a condition that causes blood not to clot properly, are located on the X chromosome. It is a recessive disorder. A man normal for blood clotting and a woman who is a carrier of the condition but still clots normally have children. Show the cross and answer the questions.

Answers

The probability of a male offspring having hemophilia is 0.5 or 50%.

The probability of a female offspring being a carrier of hemophilia is 0.5 or 50%.

What is the probability of hemophilia in the offspring?

Since the woman is a carrier of the hemophilia gene, she must have one normal X chromosome (X^N) and one hemophilia X chromosome (X^H). The man has two normal X chromosomes (X^NX^N).

The Punnett square for their cross would look like:

 | X^N    | X^H

--|--------|------

Y | X^NX^N | X^HY

--|--------|------

Y | X^NX^N | X^HY

The possible genotypes of their offspring are X^NX^N, X^NX^H, and X^HY.

The male offspring will have hemophilia if he inherits the X^H chromosome from his mother. Since the mother is a carrier and has one X^H and one X^N chromosome, there is a 50% chance of passing on the X^H chromosome to her son.

The female offspring will be a carrier of hemophilia if she inherits one X^H chromosome from her mother. There is a 50% chance of the mother passing on the X^H chromosome to her daughter, and a 50% chance of the daughter inheriting the X^N chromosome from her father.

Learn more about hemophilia at: https://brainly.com/question/14203344

#SPJ1

For either reproductive or therapeutic cloning, we begin with one 'starter cell'. This cell must
meet three requirements:

Answers

The requirements for a starter cell in reproductive or therapeutic cloning. In both processes, the starter cell must meet the following three criteria: Nucleus Containing Genetic Information, Totipotency, and Viability.

Nucleus Containing Genetic Information: The starter cell must have a nucleus containing the complete genetic information of the organism being cloned. This ensures that the resulting clone will have the same genetic traits and characteristics as the original organism.Totipotency: The starter cell must be totipotent, which means it has the potential to differentiate into any cell type within the organism. Totipotent cells, such as fertilized eggs or early-stage embryonic cells, have the ability to develop into a complete organism, making them ideal for cloning purposes.Viability: The starter cell must be viable and able to divide and differentiate into specialized cells. This ensures that the cloned organism can grow and develop properly. Viability is influenced by various factors, such as the health of the cell, the presence of necessary nutrients, and the absence of harmful substances or conditions.In summary, a suitable starter cell for reproductive or therapeutic cloning must have a nucleus containing the full genetic information of the organism, be totipotent, and be viable for successful development. These three requirements ensure that the cloning process can yield a genetically identical organism with proper growth and differentiation capabilities.

For more such question on therapeutic cloning

https://brainly.com/question/12483409

#SPJ11

In a cell capable of regulated secretion, what are the three main classes of proteins that must be separated before they leave the trans Golgi network?

Answers

Before leaving the trans-Golgi network, at least three classes of proteins—those destined for secretory vesicles, lysosomes, and quick delivery to the cell surface—must be split in a cell capable of regulated secretion.

The three main classes of proteins that must be separated before leaving the trans-Golgi network in cells that can regulate secretion are:

Proproteins or prohormones: Post-translational processing is required for these precursor forms of hormones or other signaling molecules to become active. They are typically packaged in an inactive form into secretory vesicles, where they are cleaved to release the active hormone or peptide upon stimulation.

Enzymes: Chemicals are proteins that catalyze biochemical responses and are frequently bundled into secretory vesicles for send out. It means a lot to isolate these chemicals from other secretory proteins to forestall untimely initiation and corruption.

Proteins with a structure: Tissues receive support and elasticity from structural proteins like collagen and elastin, which are also secreted by cells. To avoid aggregation and misfolding, it is essential to separate these proteins from other secretory proteins.

To learn more about lysosomes here

https://brainly.com/question/28202356

#SPJ4

What happens to platelets in septic shock?

Answers

Septic shock is a life-threatening condition that occurs when the body's immune response to an infection leads to widespread inflammation and organ dysfunction.

In septic shock, platelets, which are blood cells that help with blood clotting, can become dysfunctional and decrease in number. This can lead to a higher risk of bleeding and difficulty forming blood clots, which can be particularly dangerous in the presence of other factors that can contribute to bleeding, such as organ damage or medical procedures.

Management of platelet dysfunction in septic shock may include blood transfusions or medications to support clotting.

Learn more about Septic shock

https://brainly.com/question/29909856

#SPJ4

photosynthesis has a positive Gibbs free energy (+ ΔG), so it is _____ and _____

Answers

Photosynthesis has a positive Gibbs free energy (+ΔG), so it is non-spontaneous and endergonic.

Photosynthesis is an endergonic process, meaning it requires an input of energy to occur and has a positive Gibbs free energy (+ΔG). This energy input is provided by sunlight, which is absorbed by pigments such as chlorophyll in the chloroplasts of plant cells. The absorbed light energy is used to drive a series of chemical reactions that convert carbon dioxide and water into glucose and oxygen.

The positive Gibbs free energy of photosynthesis means that the reaction is not spontaneous and requires an input of energy to occur. This energy is provided by the sun, and the process is able to proceed due to the presence of specialized pigments and enzymes within the plant cells that can capture and convert the absorbed light energy into chemical energy.

Overall, photosynthesis has a positive Gibbs free energy (+ΔG), so it is non-spontaneous and endergonic.

To learn more about  Photosynthesis here

https://brainly.com/question/29775046

#SPJ4

identify the true statements about reproduction and development in animals. multiple select question. some animals reproduce sexually. some animals reproduce asexually. fertilization can occur externally. fertilization can occur internally. some animals undergo metamorphosis. all embryos develop inside the mother.

Answers

The true statements about reproduction and development in animals are: Some animals reproduce sexually and asexually, fertilization can occur externally or internally and some animals undergo metamorphosis.

Sexual and asexual reproduction are both common among animals. Sexual reproduction involves the fusion of gametes (sperm and egg cells) from two different individuals, resulting in genetic diversity in the offspring.

Asexual reproduction, on the other hand, involves the production of offspring without the involvement of gametes, resulting in offspring that are genetically identical to the parent.

Fertilization can occur externally, where the sperm and egg meet outside of the body, in animals such as fish and amphibians. Alternatively, fertilization can occur internally, where the sperm is transferred to the female's reproductive tract to meet the egg, in animals such as mammals and birds.

Metamorphosis is a process undergone by some animals, such as insects and amphibians, in which they undergo drastic changes in their physical form and structure during their development from larvae to adults.

It is not true that all embryos develop inside the mother. In some animals, such as oviparous species like birds and reptiles, embryos develop outside the mother's body in eggs. In viviparous species such as mammals, embryos develop inside the mother's body.

To know more about reproduction, refer here:
https://brainly.com/question/14329745#
#SPJ11

Does energy decrease from one trophic level to the next? Why or why not?
Describe 3 factors that reduce the amount of energy transferred between trophic levels.
How are these related to consumption, assimilation, and production efficiency?

Answers

Yes, energy decreases from one trophic level to the next. This is because at each trophic level, some energy is lost in the form of metabolic processes such as respiration, and some of the energy is used up by organisms in order to grow and reproduce.

Three factors that reduce the amount of energy transferred between trophic levels are consumption, assimilation, and production efficiency. Consumption efficiency is the percentage of energy from a prey item that is actually consumed and digested by a predator.

Assimilation efficiency is the percentage of that energy that is actually absorbed by the predator and used for growth and other metabolic activities. Production efficiency is the percentage of energy from prey items that is actually converted into new biomass by the predator.

All of these factors are related because they all contribute to the amount of energy that is actually transferred between trophic levels. Poor consumption, assimilation, and production efficiency lead to a decrease in the amount of energy transferred between trophic levels.

Know more about Biomass here

https://brainly.com/question/21525417#

#SPJ11

how can athletes stimulate bone formation

Answers

Athletes can stimulate bone formation through various methods that involve mechanical stress on the bone. Here are some ways:

Weight-bearing exercise: Activities that involve weight-bearing or impact, such as running, jumping, and weightlifting, stimulate bone formation by exerting mechanical stress on the bone. The stress causes the bone to remodel and become stronger.

Resistance training: Resistance training, such as weightlifting, also stimulates bone formation by inducing mechanical stress on the bone. It can be particularly effective in promoting bone density in areas such as the spine and hips, which are at higher risk of fracture in older adults.

High-impact activities: High-impact activities, such as plyometrics and jumping exercises, can stimulate bone formation by inducing brief bursts of high mechanical stress on the bone. These activities can be particularly effective in promoting bone formation in younger athletes.

Proper nutrition: Adequate intake of calcium, vitamin D, and other nutrients is essential for bone formation. Athletes should consume a balanced diet that includes foods rich in these nutrients, such as dairy products, leafy greens, and fatty fish.

Avoiding overtraining: While exercise is important for bone health, too much exercise or overtraining can actually have the opposite effect and lead to bone loss. Athletes should aim for a balance of exercise and rest to promote optimal bone health.

Learn more about Athletes

https://brainly.com/question/17404705

#SPJ4

Leaves --> Snail--> Frog -->Owl
In this chain what one is the Secondary Consumer?

Answers

The secondary consumer in this food chain is the frog. A secondary consumer is an organism that feeds on primary consumers, which in this chain are the snail that feeds on leaves.

The frog is higher up in the food chain and feeds on the snail, making it a secondary consumer.

As for the owl, it is a tertiary consumer. A tertiary consumer is an organism that feeds on secondary consumers. In this chain, the owl would feed on the frog, making it a tertiary consumer.

It is important to understand the roles of different organisms in a food chain as it helps us understand the flow of energy and nutrients in an ecosystem. It also highlights the importance of each organism in maintaining the balance of the ecosystem.

For more such questions on Food chain.

https://brainly.com/question/7564953#

#SPJ11

What is the function of LCAT?
(A) LCAT catalyzes the production of cholesteryl esters.
(B) LCAT catalyzes the production of cholesterol.
(C) LCAT catalyzes the breakdown of cholesteryl esters.
(D) LCAT catalyzes the breakdown of cholesterol.

Answers

The function of LCAT (Lecithin-Cholesterol Acyltransferase) is to catalyze the production of cholesteryl esters.

Here, correct option is A.

LCAT is an enzyme that is involved in cholesterol metabolism in humans. It takes free cholesterol and combines it with phospholipids and fatty acids, creating a cholesteryl ester. This process is known as esterification and is important for maintaining the levels of cholesterol in the body. Without this enzyme, cholesterol would remain in the form of free cholesterol, which can lead to a variety of health problems.

LCAT works to protect the body by converting free cholesterol into the more stable form of cholesteryl esters. This helps to regulate the levels of cholesterol in the body, ensuring that it is within the optimal range. As such, LCAT plays a critical role in maintaining good health and preventing a variety of cardiovascular diseases.

Therefore, correct option is A.

know more about cholesteryl esters here

https://brainly.com/question/30453412#

#SPJ11

How is rDNA made?Plasmid/cloning vector:

Answers

Cloning a gene onto a plasmid, or small circular fragments of rDNA, is frequently the initial step in a molecular biology experiment. Plasmids are one of the principal vehicles for gene transfer among bacteria.

Bacteria Cloning can transmit their genes for antibiotic resistance with their neighbors through a process called conjugation, which involves direct physical contact between the bacteria. The ability to transfer the entire plasmid to different bacteria is another common feature of plasmids.

By acquiring a single plasmid, a bacterium can acquire resistance to a number of drugs simultaneously. Then, they develop multidrug resistance. Resistance mechanisms are ways that bacteria can evolve defenses against antibiotics and antifungals in order to survive. DNA explains to the germ how to generate particular proteins.

Learn more about rDNA visit: brainly.com/question/5996835

#SPJ4

Which hormone controls the development of female secondary sex characterisrics?​

Answers

Answer : Estrogen and progesterone

Explanation :

Functions of Estrogen and progesterone:

Estrogen and progesterone are the sex hormones in females.

It is responsible for the development of female secondary sex characterisrics.

It Regulates menstrual cycle.

Essential for ova mensuration and release.

Progesterone is the other hormones which is helpful during the pregnancy.

What bacterial skin diseases occur in llamas?

Answers

Llamas are susceptible to various bacterial skin diseases that can negatively impact their health. Some common bacterial infections affecting llamas include Dermatophilosis, Staphylococcal dermatitis, and Cutaneous tuberculosis.


Dermatophilosis, also known as rain scald or lumpy wool, is caused by the bacterium Dermatophilus congolensis. This condition primarily affects llamas in damp environments and is characterized by the formation of crusty, scabby lesions on the skin, often accompanied by hair loss. Dermatophilosis is usually treated with antibiotics and improved hygiene practices.


Staphylococcal dermatitis, caused by the Staphylococcus bacteria, is another common skin infection in llamas. Symptoms include abscesses, skin ulcers, and hair loss. Treatment usually involves topical or systemic antibiotics, as well as proper wound care and hygiene measures to prevent the spread of infection.


Cutaneous tuberculosis, though rare, can also affect llamas. It is caused by the Mycobacterium species, leading to granulomatous lesions on the skin. This zoonotic disease poses a risk to humans and other animals, so early detection and treatment are crucial. Treatment typically involves a combination of antibiotics and isolation of the infected animal.


In summary, bacterial skin diseases in llamas, such as Dermatophilosis, Staphylococcal dermatitis, and Cutaneous tuberculosis, can cause various symptoms like lesions, abscesses, and hair loss. Proper diagnosis and treatment with antibiotics, along with good hygiene practices, are essential for managing these infections and ensuring the health of the affected llamas.

Know more about Llamas here :

brainly.com/question/30542012

#SPJ11

How does food intake contribute to heat production?

Answers

Food intake contribute to heat production due to the process called  diet-induced thermogenesis.

In order to digest, absorb, and metabolize the nutrients, our bodies must use energy. Our body temperature is influenced by the heat produced as a result of this energy expenditure. The macronutrient makeup of the food consumed determines the precise amount of heat produced.

More heat may be produced when a high protein diet is consumed than when a high carb or high fat diet is. Additionally by boosting metabolism, exercise can raise body temperature. This effect is amplified when combined with food consumption.

Learn more about macronutrient at:

brainly.com/question/11187285

#SPJ4

What are the three roles of DNA in heredity?

Answers

The storing, copying, and transmission of genes are the three functions of the DNA molecule in legacy.

Today, DNA has three separate purposes: genetic, immunological, and structural, all of which differ greatly from one another and depend in different ways on the bases and the sugar phosphate backbone. DNA is a collection of molecules that is in charge of transporting and passing genetic information from parents to children.

This holds true for viruses as well because the majority of these organisms include either RNA or DNA as part of their genetic makeup. All of an organism's future protein synthesis will be governed by the genetic information encoded in its DNA. DNA is located in the cell nucleus of eucaryotes. Two Complementary Chains of Nucleotides Make Up a DNA Molecule.

Learn more about DNA visit: brainly.com/question/2131506

#SPJ4

What are the two different kid of transduction methods?
What does conjugation require?
What type of DNA is transferred by general transduction?
What are the requirements for general transduction?

Answers

The two different kinds of transduction methods are general transduction and specialized transduction. Conjugation requires direct contact between two bacterial cells and the presence of conjugative plasmids.

General transduction transfers random fragments of bacterial chromosomal DNA through a bacteriophage, while specialized transduction transfers specific genes located near the prophage insertion site. General transduction requires a bacteriophage that is capable of infecting the bacterial host and integrating its DNA into the host chromosome, as well as the host's ability to incorporate foreign DNA into its genome.
There are two different types of transduction methods: generalized transduction and specialized transduction.
1. Generalized transduction involves the transfer of any part of the bacterial DNA, while specialized transduction transfers only specific parts of the bacterial DNA.
2. Conjugation requires direct cell-to-cell contact between the donor and recipient bacterial cells, as well as the presence of a sex pilus and a conjugative plasmid (e.g., F-plasmid) in the donor cell.
3. In general transduction, any type of bacterial DNA can be transferred from the donor cell to the recipient cell. This occurs when a bacteriophage accidentally packages bacterial DNA into its capsid instead of its own viral DNA during the lytic cycle.
4. The requirements for general transduction include the presence of a bacterial host cell, a bacteriophage capable of infecting the host, and the occurrence of an error in the packaging of viral DNA, leading to the transfer of bacterial DNA instead.

For more such questions on transduction , Visit:

https://brainly.com/question/12836556

#SPJ11



Pyruvate oxidation is the next step in capturing the remaining _________ in the form of _____________

Answers

Pyruvate oxidation is the next step in capturing the remaining energy in the form of ATP. More specifically, pyruvate oxidation captures the remaining energy stored in the pyruvate molecules produced in glycolysis in the form of ATP and reducing equivalents (NADH). This step is the link between glycolysis and the Krebs cycle in cellular respiration.

_____ (like plants) capture solar energy and convert it to chemical energy by photosynthesis

Answers

Autotrophs (like plants) capture solar energy and convert it to chemical energy by photosynthesis.

Inorganic resources like water, carbon dioxide, and sunshine can be used by autotrophs to make their own organic molecules, or food. They employ solar energy to power the photosynthesis process, which turns carbon dioxide and water into glucose and oxygen. Then, this glucose is utilized as an energy source and a component of other organic compounds like lipids, nucleic acids, and proteins.

Although plants are the most prevalent type of autotroph, several bacteria and algae can also carry out photosynthesis. By creating organic compounds that other species may eat, these organisms play a crucial part in the food chain and form the foundation of the food pyramid.

To know more about autotrophs, refer:

https://brainly.com/question/14487616

#SPJ4

7C - Muscles and Bones


1.What gases does your body need and why?


2.How and why your Breathing rate/Pulse rate changes. (Difference between active and
resting)

3..what is a drug

4..What is the structure of the human arm and what muscles help it to move.

5. What is the Structure of capillaries and how 02/CO2 are stored and carried.

7F - Acids and Alkalis




1.What is an acid?

2.What is an Alkali?

3.What is a Neutral substance?

4.How does litmus reacts to Acids and Alkalis.

5.What is a variable?

6.What is the name of the reaction between an acid and an alkali?

7.What are the common Word equations (eg: sulfuric acid + zinc oxide—> zinc nitrate + water)

8.What are products and what are reactants?

Answers

7C - Muscles and Bones

1. Your body needs oxygen (O2) to break down food molecules and produce energy, and it needs to get rid of carbon dioxide (CO2), which is a waste product of cellular respiration. Oxygen is used to generate ATP (adenosine triphosphate), which is the primary source of energy for your body's cells.

2. Your breathing rate and pulse rate can change depending on your activity level. During exercise or other physical activity, your muscles require more oxygen, so you breathe faster and your heart beats faster to deliver more oxygen-rich blood to your muscles. This is called an active state. When you are at rest, your breathing rate and pulse rate are slower because your body requires less oxygen.

3. A drug is any substance that has a physiological effect when introduced into the body. Drugs can be used for medical purposes, such as treating or preventing illness, or they can be used recreationally or illegally.

4. The human arm consists of three main parts: the upper arm (humerus), the forearm (radius and ulna), and the hand (carpals, metacarpals, and phalanges). The muscles that help move the arm include the biceps brachii, triceps brachii, deltoid, and rotator cuff muscles.

5. Capillaries are small, thin-walled blood vessels that connect arteries and veins. They have a single layer of endothelial cells, which allows for the exchange of gases, nutrients, and waste products between the blood and the surrounding tissues. Oxygen (O2) and carbon dioxide (CO2) are stored and carried by hemoglobin, a protein found in red blood cells.

7F - Acids and Alkalis

1. An acid is a substance that donates hydrogen ions (H+) in solution, which lowers the pH of the solution.

2. An alkali is a substance that accepts hydrogen ions (H+) in solution, which raises the pH of the solution.

3. A neutral substance has a pH of 7 and is neither acidic nor alkaline.

4. Litmus is a pH indicator that turns red in the presence of an acid and blue in the presence of an alkali.

5. A variable is a factor that can be changed or manipulated in an experiment.

6. The reaction between an acid and an alkali is called a neutralization reaction.

7. Common word equations for neutralization reactions include:

- Hydrochloric acid + sodium hydroxide → sodium chloride + water
- Sulfuric acid + calcium hydroxide → calcium sulfate + water
- Nitric acid + potassium hydroxide → potassium nitrate + water

8. Reactants are the substances that react in a chemical reaction to produce products. Products are the substances that are produced by a chemical reaction.

I hoped this helped!

what neurotransmitter is involved in the mesolimbic reward pathway?

Answers

Explanation:

dopamine is the neurotransmitter

What is a "population viability analysis" (PVA)?
What factors are used to make a PVA?
Why are PVAs important conservation tools?

Answers

A Population Viability Analysis (PVA) is a modeling technique used by conservation biologists to assess the future viability of a population of a species. It involves using mathematical models to simulate the future population growth of a species, taking into account various factors that may affect its survival.

There are several factors used to make a PVA, including demographic factors such as birth and death rates, sex ratios, and age structure of the population, as well as environmental factors such as habitat quality, availability of resources, and exposure to environmental stressors like pollution or climate change. The model also considers the potential impact of human activities, such as hunting, fishing, and habitat destruction.

PVAs are important conservation tools because they help to identify factors that may be threatening the survival of a species, as well as potential management actions that could be taken to improve the population's viability. For example, a PVA may show that a population is at risk of extinction due to habitat loss or overhunting, and may suggest strategies such as habitat restoration or hunting regulations to mitigate those threats.

Learn more about “ population's viability “ visit here;

https://brainly.com/question/29823789

#SPJ4

Other Questions
Full employment GDP is defined as a. no cyclical unemployment. b. no structural or frictional unemployment . zero unemployment d. a point along the production possibilities curve. Employer withholding of income taxes from an employee's compensation is based on information provided by the employee to the employer on Form _________. Counting the number of items a clerk scans per hour is be an example of a/an ____ measure of performance.subjectiveobjective a residential lighting branch circuit is to be loaded at no more than 80% of its capacity. if the circuit is operating at 120v and is rated at 12a, what is the maximum initial connected load? a refrigerator has a 1000 w compressor, but the compressor runs only 20% of the time. if electricity costs $0.10/kwh, what is the monthly (30 day) cost of running the refrigerator? a more energy-efficient refrigerator with an 800 w compressor costs $100 more. if you buy the more expensive refrigerator, how many months will it take to recover your additional cost? According to "The Rise of the Rest," a majority of Americans are feeling a deep-seated anxiety about their country because, for the first time in living memory, the United States is: What goes into the MyCustomer Experience Scorecard? 1. A solution of a substance 'X' is used for whitewashing. Name the substance 'X' and write its formula. (i) (11) Write the reaction of the substance 'X' named in (i) above with water. 2 If F(x) = x + 9x + C and F(1) = 4, what is the value of C? 2 If F(x) = x + 9x + C and F(1) = 4, then C= x FC (Simplify your answer.) fill in the blank. as the population ages, particularly as baby boomers age, there will be over 60 million americans enrolled in _____ by 2019medicare which of the statements is true of chemical synapses? select all that apply. vesicles fuse with the presynaptic membrane to release neurotransmitters into the synaptic cleft. ligands must also bind to ligand-gated ion channels on the presynaptic membrane of the synapse. once released from postsynaptic membrane receptors, neurotransmitter molecules may be actively returned to the presynaptic cell. they are more common than electrical synapses. A gyroscope has a moment of inertia of 0.14kgm2 and an initial angular speed of 15 rad/s.Friction in the bearings causes its speed to reduce to zero in 30s. What is the value of the average frictional torque?a.3.3 10-2Nmb.8.1 10-2Nmc.14 10-2Nmd.7.0 10-2Nm Female deityNukuoro, Micronesia. c. 18th to 19th century C.E. woodCarving, these figurines were of smaller statrue and most likey required experice to achieve lines on the Deity. Which of the following is the best integration technique to use for the following?2x(x2+1)5dxA) The product rule.B) The chain rule.C) The power rule.D) The substitution rule. What metric could be used to make a quantitative calculation of risk due to a specific threat to a specific function or asset? The Smith Manufacturing Company had inventory turnover of 9 for the current year.What is the days' sales in inventory for the current year? When should a company issue equity rather than debt to fund its operations? Sample Answer Jamf Pro can erase all user content and settings from a mobile device.a) Trueb) False Job ____ refers to organizing tasks, duties, and responsibilities into a productive unit of work.structuringdesignre-engineeringconfiguration The QBI deduction ______.A) is available only for income earned through partnerships and S corporationsB) is only available to corporate taxpayersC) lowers the effective tax rate on business profit earned by sole proprietorships and passthrough entities