1. how much is the increase in temperature from 1880 to 2010?
2. what happened to the amount of carbon dioxide from 1880 to 2010?
3. what is the relationship between the amount of carbon dioxide and global temperature?
4. when was temperature at its highest and at its lowest?

please help neep asap....

Kinetic energy depends on the mass and the motion

We can see that the REE for a female with an adult weight of 150 pounds decreases as she gets older.

To calculate the REE for a person over time, we need to follow these steps:

Decide to calculate the REE for a male or female: Let's assume we want to calculate the REE for a female.

Choose an adult weight:

Let's assume the adult weight is 150 pounds.

Calculate the REE for the adult from age 18-29, 30-60, and over 60. Assume the adult maintains the same body weight at each age.

Using the data table that shows the estimation of the daily resting energy expenditure (REE), we can find the REE for the adult at each age:

Age       Male (kcal/day)     Female (kcal/day)

18-29  2,400-3,000      2,200-2,400

30-60  2,200-2,600      2,000-2,200

over 60  2,000-2,400       1,800-2,000

Let's use the female column to calculate the REE for the adult female who weighs 150 pounds:

For age 18-29, the REE range is 2,200-2,400 kcal/day.

Let's take the average of the range: (2,200+2,400)/2 = 2,300 kcal/day.

For age 30-60, the REE range is 2,000-2,200 kcal/day.

Let's take the average of the range: (2,000+2,200)/2 = 2,100 kcal/day.

For age over 60, the REE range is 1,800-2,000 kcal/day.

Let's take the average of the range: (1,800+2,000)/2 = 1,900 kcal/day.

Now we can record these calculations in the table:

Age   Male (kcal/day) Female (kcal/day)

18-29  2,400-3,000    2,200-2,400

30-60  2,200-2,600   2,000-2,200

over 60  2,000-2,400          1,800-2,000

Therefore, we can see that the REE for a female with an adult weight of 150 pounds decreases as she gets older.

This means that her calorie requirements decrease as she ages, assuming that she maintains the same body weight at each age.

To know more about refer REE here

brainly.com/question/22779484#

#SPJ11

1. The relationship between lightning and electricity was made clear by Franklin's experiment.2.  He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge. 3,4. Some scientists and historians doubt this story because it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished5. . Noone else try repeating this experiment

Do you think that Franklin actually performed this experiment?

The experiment was not carried out by Franklin to demonstrate the presence of electricity. Furthermore, it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished.

He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge in a "leyden jar," a container for storing electrical charges, proving that lightning was a type of electricity. Noone else try repeating this experiment.

Franklin established that lighting was an electrical discharge through the kite experiment and discovered that it could be charged into the ground over a conductor, offering a secure alternate route and reducing the possibility of fatal fires.

To learn more about electricity use:

https://brainly.com/question/29789034

#SPJ4

By using, Coulomb's Law the two charges are: approximately 0.248 meters apart.

To find the distance between a +32.2 µC charge and a +12.3 µC charge that experience a 0.544 N force, we can use Coulomb's Law.

Coulomb's Law states that the force (F) between two charges (q1 and q2) is proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. The formula for Coulomb's Law is F = k * (q1 * q2) / r², where k is the electrostatic constant, approximately 8.99 x 10^9 N m²/C².

In this case, q1 = +32.2 µC, q2 = +12.3 µC, and F = 0.544 N. First, we need to convert the charges from microcoulombs (µC) to coulombs (C) by multiplying by 10^-6: q1 = 32.2 x 10^-6 C and q2 = 12.3 x 10^-6 C.

Now we can plug these values into Coulomb's Law formula:

0.544 N = (8.99 x 10^9 N m²/C²) * (32.2 x 10^-6 C) * (12.3 x 10^-6 C) / r²

Next, we will solve for r:

r² = (8.99 x 10^9 N m²/C²) * (32.2 x 10^-6 C) * (12.3 x 10^-6 C) / 0.544 N
r² ≈ 0.0615 m²

Now, take the square root of both sides to find r:

r ≈ 0.248 m

So, the two charges are approximately 0.248 meters apart.

To know more about Coulomb's Law, refer here:

https://brainly.com/question/28040775#

#SPJ11

Complete question:

A +32. 2 u C charge feels a 0. 544 N force from a +12. 3 uC charge. How far apart are they?

(u stands for micro. )

According to the law of conservation of momentum, the total momentum of a system remains constant if no external forces act on it. In this scenario, the boat and the person are initially at rest, so their total momentum is zero.

When the person on the dock tosses the watermelon to you, the watermelon will have an initial momentum in the direction of the throw. Since there are no external forces acting on the system, the total momentum of the system must still be zero after the toss.

To maintain the total momentum at zero, you and the boat must acquire an equal but opposite momentum to balance out the momentum of the watermelon. As a result, the boat will move backward in response to the forward momentum acquired by you when you catch the watermelon.

This outcome demonstrates the law of conservation of momentum in action, where the total momentum of the system (you, the boat, and the watermelon) remains constant before and after the toss.

To know more about momentum refer here

https://brainly.com/question/30677308#

#SPJ11

The mass of water that was heated in the calorimetry experiment was 547.73 g.

T is the temperature change (7.16 K). Rearranging the formula to find the mass (m):

m = Q / (cΔT) Plugging in the values:

m = 17000.0 J / (4.18 J/g·K × 7.16 K) m ≈ 657.71 g

So, approximately 657.71 grams of water was heated in the calorimetry experiment.

To calculate the mass of water that was heated, we need to use the formula:

Q = m × c × ΔT

where Q is the heat transferred, m is the mass of water, c is the specific heat capacity of water, and ΔT is the temperature change.

We are given that Q = 17000.0 J, ΔT = 7.16 K, and c = 4.18 J/(g·K) (the specific heat capacity of water). We can rearrange the formula to solve for m:

m = Q / (c × ΔT)

Substituting the values we have:

m = 17000.0 J / (4.18 J/(g·K) × 7.16 K)

m = 547.73 g

To learn more about : calorimetry

https://brainly.com/question/28537741

#SPJ11

When approaching a railroad crossing with no warning device, the speed limit is determined by state law and may vary depending on the specific location and circumstances.

However, there are some general guidelines to keep in mind:

1. Slow down: It is always recommended to slow down when approaching a railroad crossing, regardless of whether there is a warning device or not.

2. Look and listen: Take the time to look and listen for trains before proceeding across the tracks. Even if you don't see or hear a train, it's still important to exercise caution.

3. Be prepared to stop: Be prepared to come to a complete stop if necessary. If you see a train approaching, do not try to beat it across the tracks.

4. Obey signs and signals: Follow any posted signs or signals that indicate the speed limit or provide other warnings about the crossing.

5. Yield to trains: Remember that trains always have the right of way. If a train is approaching, yield to it and wait until it has passed before proceeding.

In general, it's important to approach all railroad crossings with caution, even if there are no warning devices present.

The exact speed limit may vary depending on the location and circumstances, so it's always best to exercise caution and be prepared to stop if necessary.

To know more about speed limit refer here

https://brainly.com/question/29632218#

#SPJ11

These radio waves have a wavelength of roughly 492.62 metres.

In the USA, the FM transmission runs from 88.0 MHz to 108.0 MHz. 100 channels, each 200 kHz (0.2 MHz) wide, make up the band. The centre frequency is situated 100 kHz (0.1 MHz) up from the channel's lower end, or at half the FM channel's bandwidth. As frequency rises as energy falls, frequency and energy are related directly in the energy equation.

wavelength Equals light's speed (c) divided by frequency (f)

Where the speed of light (c) is approximately 3.00 x 10⁸ m/s.

Converting the given frequency of 610 kHz to Hz:

610 kHz = 610 x 10³ Hz

Substituting the values in the formula:

λ = (3.00 x 10⁸ m/s) / (610 x 10³ Hz)

λ = 492.62 meters (approx.)

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

There is a relationship between the time the ball is in the air and the distance it travels. As the time increases, the distance decreases. The coach's stopwatch has a resolution of between 0.04s and 0.07s.

There seems to be a pattern between the time the ball is in flight and the distance it travels. From Table 1, we can see that as the time taken for the ball to reach the batsman increases, the distance the ball travels decreases.

For instance, ball 1 takes the least time to reach the batsman (0.42s) and travels the greatest distance (17.55m), while ball 5 takes the most time (0.58s) and travels the shortest distance (17.75m). This pattern suggests that the distance traveled by the ball decreases with increasing time taken to reach the batsman.

To determine the resolution of the stopwatch used by the coach, we can look at the smallest difference in time between two consecutive balls. From Table 1, we can see that the difference between the times of balls 1 and 2 is 0.04s, while the difference between the times of balls 3 and 4 is 0.07s.

Therefore, we can assume that the resolution of the stopwatch is somewhere between 0.04s and 0.07s. However, we cannot determine the exact resolution without more data.

In summary, there is a pattern between the time the ball is in flight and the distance it travels. As the time taken for the ball to reach the batsman increases, the distance the ball travels decreases. The resolution of the stopwatch used by the coach is estimated to be between 0.04s and 0.07s.

To know more about distance refer here:

https://brainly.com/question/21470320#

#SPJ11

The small electric devices that, like vacuum tubes, could receive and amplify radio signals were known as transistors.

Transistors revolutionized the field of electronics by replacing vacuum tubes, which were bulky, fragile, and consumed a lot of power. The invention of transistors, which was made by John Bardeen, Walter Brattain, and William Shockley at Bell Labs in 1947, paved the way for the development of smaller, more efficient electronic devices, such as radios, televisions, and computers.

Transistors are made of semiconductor materials, such as silicon or germanium, and they work by controlling the flow of electrons through a material. They have three main components: the emitter, the base, and the collector. When a small current is applied to the base of a transistor, it controls the flow of a larger current between the emitter and the collector, allowing the transistor to amplify signals.

Transistors are now found in nearly every electronic device, from smartphones and laptops to cars and medical equipment. They have enabled the development of smaller, more efficient, and more powerful devices that have transformed our daily lives.

To learn more about transistors

https://brainly.com/question/31052620

#SPJ4

The orbit radius is 1.64 x [tex]10^{6}[/tex] km. The period of the orbit of the blob of ionized matter around a black hole is given as 4.81 ms.

The mass of the black hole is 27.7 times the mass of the Sun, which is 1.991 x [tex]10^{30}[/tex] kg. Let the radius of the orbit be denoted as r.

Then, the orbital velocity of the blob can be calculated as v = 2πr/T, where T is the period of the orbit. Using this formula, we get v = 2πr/4.81 x [tex]10^{-3}[/tex] s.

The gravitational force between the black hole and the blob of ionized matter is given by F = Gm1m2/[tex]r^{2}[/tex], where m1 and m2 are the masses of the black hole and the blob respectively, and G is the gravitational constant.

Equating this force to the centripetal force, which is /r, we can solve for r. Simplifying this equation, we get r = (GM*[tex]T^{2}[/tex])/([tex]4\pi ^{2}[/tex]), where M is the mass of the black hole.

Substituting the given values, we get r = 1.64 x [tex]10^{6}[/tex] km. Therefore, the orbit radius is 1.64 x [tex]10^{6}[/tex] km.

To know more about gravitational force, refer here:

https://brainly.com/question/12528243#

#SPJ11

Max would hear the clapping sound at a slightly slower tempo compared to the other students.

Assuming that the speed of sound in air is approximately 343 m/s at room temperature and sea level, we can calculate the time it takes for the sound wave to reach Max's ears.

Using the equation distance = speed x time, we can rearrange it to get time = distance/speed. Plugging in the values, we get time = 80/343 = 0.233 seconds.

The metronome produces sound waves at a constant frequency. At a distance of 80 meters, the sound waves would have to travel a longer distance to reach Max's ears compared to the other students who are closer.

This means that the time it takes for the sound waves to travel from the metronome to Max's ears is longer than for the other students. As a result, Max would hear the clapping sound at a slightly slower tempo compared to the other students.

To know more about metronome, refer here:

https://brainly.com/question/25667592#

#SPJ11

As the loop moves away from the magnet, the force weakens and is greatest when it is directly beneath the magnet.

When a conducting circular loop moves downwards beneath a stationary magnet with its north pole pointing upward, an induced current is produced in the loop. This induced current flows in a counterclockwise direction, as seen from above.

Additionally, the loop experiences a force due to the magnet. This force is perpendicular to both the direction of motion of the loop and the direction of the magnetic field produced by the magnet. The force is given by the formula F = BIL, where B is the strength of the magnetic field, I is the current induced in the loop, and L is the length of the loop that is in contact with the magnetic field.

Since the loop is moving downwards, the force on it is upwards, opposite to the direction of motion. The force is strongest when the loop is directly under the magnet and decreases as the loop moves away from the magnet.

To learn more about : magnet

https://brainly.com/question/14997726

#SPJ11

Based on the decision tree analysis, the most appropriate decision for the company is to build a medium-sized supermarket with an expected net present value of $600,000.

To determine the most appropriate decision for the supermarket operator, we will analyze the situation using a decision tree. Here's a step-by-step explanation:

1. Calculate the expected net present value (NPV) for each scenario:

Medium-sized supermarket:

- Average demand: NPV = $600,000 (no reason to expand)

Large-sized supermarket:

- Average demand:

- Do nothing: NPV = $100,000

- Stimulate demand through advertising:

- Unfavorable response (20% chance): NPV = -$20,000

- Favorable response (80% chance): NPV = $320,000

- Expected NPV = (0.2 * -$20,000) + (0.8 * $320,000)

                           = $244,000

- Favorable demand:

 - Maintain size: NPV = $623,000

 - Expand:

   - 75% chance of $330,000

   - 25% chance of $610,000

   - Expected NPV = (0.75 * $330,000) + (0.25 * $610,000)

                               = $400,000

2. Calculate expected NPV for each supermarket size:

- Medium-sized: (0.35 * $600,000) + (0.65 * $600,000)

                          = $600,000

- Large-sized: (0.35 * $244,000) + (0.65 * max($623,000, $400,000))

                     = $527,350

3. Compare the expected NPVs:

- Medium-sized: $600,000

- Large-sized: $527,350

Based on the decision tree analysis, the most appropriate decision for the company is to build a medium-sized supermarket with an expected net present value of $600,000.

To know more about supermarket operator refer here

brainly.com/question/30608677#

#SPJ11

The work done by the cable on the car is 67500 J.  

To calculate the work done by the cable on the car, we need to use the formula for work, which is:

W = F * d

here W is the work done, So, F is the force applied, and here d is the displacement of the object being moved.

In this case, the force applied by the cable is given by the tension in the cable, which is 1350 N. The displacement of the car is given by the distance it is pulled along the roadway, which is 5.00 km.

We can use the formula for distance to calculate this displacement, which is:

d = 5.00 km

Substituting this value into the formula for work, we get:

W = 1350 N * 5.00 km

W = 67500 J

Therefore, the work done by the cable on the car is 67500 J.  

Learn more about work Visit: brainly.com/question/25573309

#SPJ4

To estimate the mass of the fish using the available items, follow these steps:

1. Fill your 16 oz coffee mug with river water.
2. Tie the rope around the fish securely, ensuring it doesn't escape.
3. Place the fish inside the plastic bag and seal it. Make sure there's no air inside the bag.
4. Use the paddles to create a makeshift balance scale. Balance the paddle on a stable surface in the boat, with the center acting as a fulcrum.
5. Place the bag with the fish on one end of the paddle and the coffee mug filled with water on the other end.
6. Gradually add or remove water from the coffee mug until the paddle balances evenly.
7. Measure the volume of water left in the coffee mug. This is approximately equal to the volume of the fish.
8. Assume the fish has a density similar to water (1 kg/L). Convert the remaining water volume in the coffee mug from ounces to liters (16 oz = 0.473 L).
9. Multiply the fish's volume in liters by its density (1 kg/L) to find the fish's mass in kilograms.

Keep in mind that this method is an estimation and may not be extremely accurate, but it should give you a rough idea of the fish's mass in the absence of proper scales.

To learn more about density, refer below:

https://brainly.com/question/29775886

#SPJ11

It would require an additional 1.35 J of work to stretch the spring by an additional 4.0 cm.

The work required to stretch a spring is given by the equation:

W = (1/2)kx²

where W is the work done, k is the spring constant, and x is the displacement from the equilibrium position.

To find the spring constant k, we can use the equation:

k = F/x

where F is the force required to stretch the spring by a certain amount.

Given that it requires 6.0 J of work to stretch the spring by 2.0 cm, we can find the spring constant as follows:

6.0 J = (1/2)k(0.02 m)²

k = 750 N/m

To stretch the spring an additional 4.0 cm, the displacement from the equilibrium position would be:

x = 0.02 m + 0.04 m = 0.06 m

Using the equation for work done, we can find the additional work required:

W = (1/2)kx²

W = (1/2)(750 N/m)(0.06 m)²

W = 1.35 J

As a result, stretching the spring by 4.0 cm would need an additional 1.35 J of labour.

To know more about the Equilibrium, here

https://brainly.com/question/28814005

#SPJ4

Yes, it is plausible for other pairings of the Galilean satellites to eclipse each other.

The Galilean satellites are the four largest moons of Jupiter, and they are in a complex orbital dance around Jupiter.

They regularly pass in front of one another, casting shadows and causing eclipses.

Io, Europa, and Ganymede are in a Laplace resonance, which means that they are in a synchronized orbit around Jupiter.

This interaction can cause a gravitational tug on each other, leading to a potential for eclipses.

In fact, there have been observations of eclipses between other pairs of Galilean satellites, such as Europa and Ganymede.

To know more about Galilean satellites, refer here:

https://brainly.com/question/15156072#

#SPJ11

Genes are the basic units of heredity. (Los genes son las unidades básicas de la herencia.)

A short stretch of ADN called a gene. The body's genes instruct it on how to produce particular proteins. About 20,000 genes are found in each human body cell. Together, they make up the genetic makeup of the human body and determine how it functions.

Fundamental unit of the inheritance from parents to children. The genes are constructed from ADN sequences and are arranged one after the other in certain locations within the chromosomal nuclei of cells.

To know more about ADN visit:-

https://brainly.com/question/30297148

#SPJ1

a) The magnitude of the constant angular acceleration of the wheel is  -1.146 rev/min^2.

b) The wheel makes 10512 rotations before coming to rest.

c) The magnitude of the tangential component of linear acceleration of the particle is 0.037 m/s^2.

a) To find the angular acceleration, we first need to convert the time taken for the wheel to come to rest from hours to minutes. 1.6 hours is equal to 96 minutes. We can use the equation of motion for rotational kinematics:

ωf = ωi + αt

where ωf is the final angular velocity (0 in this case), ωi is the initial angular velocity (110 rev/min), α is the angular acceleration, and t is the time taken (96 minutes).

Substituting the given values, we get:

0 = 110 + α(96)

Solving for α, we get:

α = -1.146 rev/min^2 (Note that the negative sign indicates a decrease in angular velocity.)

b) The number of rotations made by the wheel before coming to rest can be found using the formula:

θ = ωit + 1/2 αt^2

where θ is the angle of rotation, ωi is the initial angular velocity, α is the angular acceleration, and t is the time taken.

Substituting the given values, we get:

θ = (110 rev/min)(96 min) + 1/2 (-1.146 rev/min^2)(96 min)^2

Simplifying, we get:

θ = 10512 rev

c) The tangential component of linear acceleration can be found using the formula:

at = rα

where at is the tangential component of linear acceleration, r is the distance from the axis of rotation, and α is the angular acceleration.

Substituting the given values, we get:

at = (0.44 m)(2π/60)(-1.146 rev/min^2)

Simplifying, we get:

at = -0.037 m/s^2

To learn more about speed click on,

https://brainly.com/question/13245800

#SPJ4

Complete question is:

The flywheel of a steam engine runs with a constant angularspeed of 110 rev/min. when steam is shut off, the friction of thebearings and the air brings the wheel to rest in 1.6 h.

a) what is the magnitude of the constant angular acceleration ofthe wheel in rev/min^2? do not enter the units.

b) how many rotations does the wheel make before coming torest?

c) what is the magnitude of the tangential component of the linear acceleration of a particle that is located at a distance of 44 cm from the axis of rotation when the flywheel is turning at 58 rev/min?

The coefficient of kinetic friction between the glass and the bar is 0.35. This is found by dividing the force of kinetic friction by the weight of the glass, using the formula for kinetic friction.

The coefficient of kinetic friction is a measure of the frictional force between two surfaces in contact when they are moving relative to each other.

In this problem, a glass slides across a bar and slows down due to kinetic friction of 0.175 N. The weight of the glass is 0.500 N, and we need to determine the coefficient of kinetic friction between the glass and the bar.

The formula for kinetic friction is:

[tex]f_k = \mu_k\; N[/tex]

where [tex]f_k[/tex] is the force of kinetic friction, [tex]\mu_k[/tex] is the coefficient of kinetic friction, and N is the normal force between the two surfaces in contact.

The normal force is equal to the weight of the object in contact with the surface. Therefore, the normal force on the glass is 0.500 N.

Substituting the given values, we get:

[tex]0.175 N = \mu_k (0.500 N)[/tex]

Solving for μ_k, we get:

[tex]\mu_k[/tex] = 0.175 N / 0.500 N

[tex]\mu_k[/tex] = 0.35

Therefore, the coefficient of kinetic friction between the glass and the bar is 0.35.

In summary, the coefficient of kinetic friction between the glass and the bar is 0.35. This is found by dividing the force of kinetic friction by the weight of the glass, using the formula for kinetic friction.

To know more about friction refer here:

https://brainly.com/question/30280206#

#SPJ11

Complete Question:

A glass slides across a bar and slows down due to a kinetic friction of 0.175N. If the glass weighs 0.500N, what is the coefficient of kinetic friction between the glass and the bar?

A. 0.350

B. 2.86

C. 1.48

D. 0.675

net force: 60( not sure)

I would say it's unbalanced because these forces are not of the same magnitude.

The increase in the translational kinetic energy of the yo-yo is 0.0423 J.

To find the increase in the translational kinetic energy of the yo-yo, we need to calculate the work done on the yo-yo by the force applied by the hand.

The work done is given by: W = Fdcos(theta), where F is the force applied, d is the distance moved, and theta is the angle between the force and the displacement.

In this case, theta is 180 degrees since the force and displacement are in opposite directions.

Substituting the given values, we get:

W = (0.235 N)*(0.18 m)*cos(180 deg)

W = -0.0423 J

Since the yo-yo initially had kinetic energy due to its downward motion, the work done by the hand increases the yo-yo's total kinetic energy. The increase in kinetic energy is given by: ΔK = -W

Substituting the value of W, we get: ΔK = 0.0423 J

Therefore, the increase in the translational kinetic energy of the yo-yo is 0.0423 J.

To know more about translational kinetic energy , refer here:

https://brainly.com/question/30107920#

#SPJ11

To calculate the velocity of liquid flow, we need to use the equation Q = A*v, where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and v is the velocity of the liquid.

Given that 3.5g of liquid flows in 4mins, we need to convert it into volumetric flow rate. 1g of water is equal to 1mL, therefore 3.5g is equal to 3.5mL. Since 4mins is equal to 240s, the volumetric flow rate is 3.5/240 = 0.0146mL/s.

To calculate the velocity of the liquid, we need to use the pressure gradient of 10cm. The pressure gradient is the change in pressure per unit distance along the pipe. 1cm of water column is equal to 0.098kPa, therefore the pressure gradient is 0.098*10 = 0.98kPa/m.

Using the equation ΔP = ρgh, where ΔP is the pressure difference, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height of the pressure gradient, we can calculate the velocity of the liquid. Rearranging the equation to solve for v, we get v = √(2ΔP/ρ), where ΔP is the pressure difference across the pipe.

Assuming the density of water is 1000kg/m³, the velocity of the liquid is v = √(2*0.98/1000) = 0.044m/s.

Therefore, the velocity of liquid flow is 0.044m/s, given that 3.5g of liquid flows in 4mins with a pressure gradient of 10cm.

For more about  velocity.

https://brainly.com/question/30649574

#SPJ11

The static shock is caused by the transfer of electrons between surfaces, creating an electric charge buildup that ionizes air molecules, resulting in a spark. Electrons and ions are the subatomic particles involved.

When a person experiences a static shock, it is due to the buildup of excess electric charge on the surface of their body. This excess charge is caused by the transfer of electrons between two surfaces that come into contact and then separate. The transfer of electrons causes an imbalance of charges, resulting in a buildup of static electricity.

The electric charge buildup creates an electric field that can be strong enough to ionize air molecules. This ionization creates a plasma, which is a gas made up of ionized particles. The plasma channels the electric charge from the person's body to the surrounding air, creating a spark that we see as a static shock.

The subatomic particles involved in this process are electrons and ions. Electrons are negatively charged subatomic particles that are transferred between surfaces to create a buildup of static electricity. Ions are atoms or molecules that have gained or lost electrons, resulting in a positive or negative charge.

In summary, a static shock occurs due to the transfer of electrons between surfaces, creating an imbalance of electric charge on the person's body.

This electric charge buildup ionizes air molecules, creating a plasma that channels the electric charge to the surrounding air, resulting in a spark that we see as a static shock. The subatomic particles involved in this process are electrons and ions.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

Intensity is the amount of sound energy per unit area while loudness is a subjective perception of the strength or amplitude of a sound.

Loudness and intensity are both measures of sound, but they are not the same thing.

Intensity refers to the amount of sound energy per unit area and is typically measured in decibels (dB).

Loudness, on the other hand, is a subjective perception of the strength or amplitude of a sound. It is influenced not only by the intensity of the sound but also by factors such as the frequency, duration, and context of the sound.

In general, higher intensity sounds will be perceived as louder, but this relationship is not always straightforward, and individual differences can also play a role in perceived loudness.

More on loudness and intensity can be found here: https://brainly.com/question/11679416

#SPJ1

The position of the harmonic oscillator at t= 0. 8 seconds is 4.76 cm. and The position of the harmonic oscillator at t=2 seconds is -5.72 cm.

A harmonic oscillator is a system that, when disturbed from its equilibrium position, experiences a restoring force proportional to the displacement from equilibrium. Examples of these systems include a mass attached to a spring, pendulums, and AC circuits. When the restoring force is linear, the system is considered a harmonic oscillator.

A. The position of the harmonic oscillator at t= 0. 8 seconds is x = 9 cm cos(2π×0.23×0.8) = 4.76 cm.
B. The position of the harmonic oscillator at t=2 seconds is x = 9 cm cos(2π×0.23×2) = -5.72 cm.
This can be calculated using the formula x = x0 cos(2πTt),
where x0 is the displacement amplitude, T is the period, and t is the time. In this case,
x0 = 9 cm, T = 0.23 seconds, and t = 2 seconds.
So, x = 9 cm cos(2π×0.23×2) = -5.72 cm.

To learn more about  harmonic oscillator

https://brainly.com/question/27237546

#SPJ4