Jamie's teacher asked her to identify four different objects based on the properties in the chart. What is most likely Object 4, and what evidence could she use to support it?
Object 4 is likely chlorine gas. This is because the texture of chlorine gas is slippery, and the color of chlorine gas is a yellowish green.
Object 4 is likely honey. This is because the texture of honey is slippery, and the color of honey is a yellowish green.
Object 4 is likely olive oil. This is because the texture of olive oil is slippery, and the color of olive oil is a yellowish green.
Object 4 is likely cheese. This is because the texture of cheese is slippery, and the color of cheese is a yellowish gree
Answer ummmm
Explanation:
hope this helps!
The following chart shows the masses and net force of vehicles travelling at the same velocity as they enter the highway. Which vehicle has the least momentum?
Vehicle
Mass (kg)
Force (N)
blue car
1,200
3,500
red car
1,100
3,500
green car
2,500
3,500
white car
2,000
3,500
green car
red car
white car
blue car
Answer:
red car as it has the least momentum
40. Give the chemical symbol of each of the following
elements.
a. the two elements that are liquids at room
temperature
b. the noble gas with the greatest atomic mass
c. any metal from group 4A
d. any inner transition metal
Will give brainliest :)
Answer:
a) bromine , mercury .
b) Oganesson .
c) Group 4A (or IVA) of the periodic table includes the nonmetal carbon (C), the metalloids silicon (Si) and germanium (Ge), the metals tin (Sn) and lead (Pb), and the yet-unnamed artificially-produced element ununquadium (Uuq).
d)thorium (Th), protactinium (Pa), uranium (U).
A pasageway of food from mouth to the stomach
Explanation:
It is called the : Esophagus
!Urgent!
How does the law of conservation of mass apply to this reaction: Mg + HCl → H2 + MgCl2?
A. Hydrogen and chlorine need to be balanced. There is an equal amount of magnesium on each side
B. The equation needs to be balanced. There are fewer hydrogen atoms in the equation than magnesium or chlorine.
C. Only the hydrogen needs to be balanced. There are equal numbers of magnesium and chlorine.
D. The law of conservation of mass has already been applied. There is an equal number of each element on both sides of the equation.
This question was already answered here's the link
https://brainly.com/question/2023746
A 100. mL reactor vessel is charged with 250. mg of P 4 and 4.21 atm of C l 2 at 298 K. The reaction goes to completion. How many moles of chlorine gas are initially in the vessel
There are 0.0172 moles of chlorine gas initially in the vessel.
Suppose we take a look and consider the reaction between P4 and Cl2, the balanced chemical equation between them can be expressed as:
[tex]\mathbf{P_4 + 6 Cl _2 \to 4 PCl_3}[/tex]
Given that:
mass of P₄ = 250 mg = 0.25gpressure of Cl₂ = 4.21 atmvolume of the reactor = 100 mL = 0.1 Ltemperature = 298 KUsing the Ideal gas equation, the number of moles of chlorine gas that were initially present in the vessel is:
PV = nRT
Making (n) the subject of the formula:
[tex]\mathbf{n = \dfrac{PV}{RT}}[/tex]
[tex]\mathbf{n = \dfrac{4.21 \ atm \times 0.1 \ L}{0.0821 \ atm.L/mol*K \times 298 \ K}}[/tex]
n = 0.0172 moles
Therefore, we can conclude that there are 0.0172 moles of chlorine gas initially in the vessel.
Learn more about the Ideal gas equation here:
https://brainly.com/question/18518493?referrer=searchResults
Physical changes occur when matter changes its__________property but not its nature.
Water turning into ice is an example of____________change.
Baking soda powder reacting to vinegar is an example of_____________change
Remember! Physical change:
Properties remain the________________
are_____________________
.
______ ___________substances are formed.
List 5 signs of chemical change:
List 5 examples of physical change: ______________________ ______________________
______________________
______________________
______________________
and
In a chemical change, the___________
change and the result is___________(can’t go back).
New substances produced in a chemical reaction have different_______________and________________
properties from the original substance.
When chemical bonds break, atoms rearrange, and new bonds form, a____________
______________
has occurred.
When a chemical reaction occurs between two liquids that form a solid, a_______________
is formed. FILL THE BLANKS!
Answer:Physical changes occur when matter changes its chemical property but not its nature. Water turning into ice is an example of a physical change. Baking soda powder reacting to vinegar is an example of a chemical change Remember! Physical change: Properties remain the same are____physichal_________________ . ______ ___________substances are formed. List 5 signs of chemical change: List 5 examples of physical change: ______________________ ______________________
Explanation:
i tried to answer the most because of my proofile page it seems like i am in high school but i am iin 6th grade
Which of the following are compounds? (Select all that apply.)
CO2
Cl2
Ne
NaCl
Balancing Chemical Equation
H2=N2=NH3
Answer:
3H2=N2= 2NH3
Explanation:
. Dãy oxide nào sau đây tác dụng được với hydrochloric acid?
Answer:
ALL
Explanation:
A piece of mefal with mass of 6. 11 g is placed into a graduated cylinder that contains 25. 1 mL of water, raising the water level to 56. 7 mL, what is the density of the metal?.
Bent molecules do not have lone pair on the central atom.
True or False
FALSE. Bent molecules do not have lone pair on the central atom.
What is bent molecules?Bent molecules is a kind of molecular geometry in which the central atom has two lone pairs of electrons and is associated with two bond pairs.
The molecular structure is also known as angular or V-shaped.
Thus, the statement "bent molecules do not have lone pair on the central atom" is FALSE.
Learn more about bent molecules here: https://brainly.com/question/1165442
#SPJ6
a concern with using genetically modified crops is
Answer: Genetically modified plants may harm organisms that were never indented to be harmed.
how long does it take to thaw a 16 lb frozen turkey?
Answer:
4-5 days
Explanation:
Convert the speed of the earth traveling around the sun 66600 mi/h to m/s
Answer: 18.5
Explanation:
Just looked it up
conversion factors are useful in solving problems in which a given measurement must be expressed in
Answer:
In humans, a cleft chin is dominant and no-cleft is recessive. What will the generations look like? Assume that Mendel’s method of crossing two true breeding parents with opposite traits is followed. Check all that apply.
The P generation, F1 generation, and F2 generation will have all cleft chins.
The P generation, F1 generation, and F2 generation will have all no-cleft chins.
The P generation and F1 generation will have all cleft chins.
The F1 generation will have all cleft chins.
The P generation and F2 generation will have all no-cleft chins.
The P generation and F2 generation will have cleft chins and no-cleft chins.
The P generation, F1 generation, and F2 generation will have cleft chins and no-cleft chins.
Explanation:
Why might someone say walking on earth is like walking on air
Answer: It can mean To be in a state of extreme happiness. thich nhat hanh once said “People usually consider walking on water or in thin air a miracle. But I think the real miracle is not to walk either on water or in thin air"
Explanation: i know this stuff
5. How are the molecular structures of sugars and alcohols similar? How do
they differ?
The molecular structures of sugars and alcohols are similar due to the presence of the -OH group.
What is Sugar?This is a substance which has a sweet taste and is a form of simple carbohydrate.
They are however not similar due to the different numbers of Carbon atoms attached to the -OH group..
Read more about Sugar here https://brainly.com/question/25936585
#SPJ2
how long to thaw a 23 pound turkey in the refrigerator
Answer:
Like about 5-6 days in the fridge.
Explanation:
Viết phương trình điện li của KOH trong nước
Answer:
Điều này là kết quả của quá trình hydrat hóa các ion: lực hút của các phân tử nước đối với Công thức phản ứng của kali hydroxit với các ion nước. Phản ứng có thể được viết dưới dạng KOH (s) → K⁺ (aq) + OH⁻ (aq).
Explanation:
Natures such as plants captures the suns energy and make their food through blank while blank get it energy by eating food
Answer:
Natures such as plants captures the suns energy and make their food through photosynthesis while Organisms get it energy by eating food
Explanation:
Photosynthesis is the act of transforming sunlight into energy. This is what plants (or natures) do to make their food.
In comparison, animals (or organisms) have to eat their food either by eating the plants (herbivores) or through other animals (carnivores)
This creates a food chain that energy travels down.
I hope this is what you were looking for, the grammar is a little confusing.
Given the reaction: (NH4)2CO3 → NH3 + CO2 + H20
What is the minimum amount of ammonium carbonate, in grams, that reacts to produce 1.0 mole of
ammonia?
Answer:
This is a simple stoichiometry problem using the ideal gas law.
First, take the grams of ammonium carbonate and convert it to moles using its molar mass and dividing. 11.9 g/96.0932 g/mol= .12384 mol
Now use a molar conversion using the balanced equation,
1 mol (NH4)2CO3 ---> 4 mol gas formed (2 mol NH3 + 1 mol CO2 + 1 mol H2O) = .12384 x 4 = .49535 mol gas
PV=nRT
V=nRT/P= .49535mol (.08206 Lxatm/molxK) (296K)/ (1.03 atm)=11.682 L
Explanation:
Hope this helps
Can I get Braineist.
Stoichiometry is used to determine the mass and the moles of the reactants and the products. 48 gms of ammonium carbonate is required to produce 1 mole of ammonia.
What is the stoichiometry coefficient?Stoichiometry coefficients are the numbers before the molecules of the reactant or the product side of the reaction that presents the numerical quantity of the chemical species.
The balanced chemical reaction is given as:
(NH₄)2CO₃ → 2 NH₃ + CO₂ + H₂0
Hence, 2 moles of ammonia are produced from 1 mole of ammonium carbonate. So, 0.5 moles of ammonium carbonate will be needed to produce 1 mole of ammonia.
Mass of ammonium carbonate is calculated as:
Mass = moles × molar mass
= 0.5 mol × 96.09 g/mol
= 48 gm
Therefore, 48 gm of ammonium carbonate is required to produce 1 mole of ammonia.
Learn more about moles and mass here:
https://brainly.com/question/23754479
#SPJ2
[tex] \huge\mathrm{Question}[/tex]
Can someone give me step by step Explanation for this question ?
That would be of great help ~
Thanks for Answering ~
From the stoichiometry of the reaction, the mass of AgNO3 required is 340 Kg.
Number of moles of I2 produced in the third step = 254 × 10^3 g/254 g/mol = 1000 molesIn the first step, 1 mole of AgNO3 produces 1 mole of AgIIn the second step, 2 moles of AgI produces 1 mole of FeI2
In the third step, 2 moles of FeI2 produces 2 moles of I2
Hence;In the third step;
1000 moles of I2 is produced by 1000 moles of FeI2
In the second step;2 moles of AgI produces 1 mole of FeI2
x moles of AgI produces 1000 moles of FeI2
x = 2 moles × 1000 moles/ 1 mole
x = 2000 moles
In the first step;2000 moles of AgI is produced by 2000 moles of AgNO3
Mass of AgNO3 required = 2000 moles of AgNO3 × 170 g/mol = 340 Kg
Learn more about stoichiometry: https://brainly.com/question/9743981
Why is fusion not used to generate electrical power?
Answer:
One of the biggest reasons why we haven't been able to harness power from fusion is that its energy requirements are unbelievably, terribly high. In order for fusion to occur, you need a temperature of at least 100,000,000 degrees Celsius. That's slightly more than 6 times the temperature of the Sun's core.
Explanation:
Answer:
The energy requirements for fusion is too high to be used to generate electrical power.
Explanation:
A sample of gas exhibits ideal behavior and occupies a volume of 350. mL at 25.0C and 1.00atm. How many moles of gas are present in the sample?
The number of mole of the gas present in the sample which occupies a volume of 350 mL at 25 °C and 1 atm is 0.0143 mole
From the question given above, the following data were obtained:
Volume (V) = 350 mL = 350 / 1000 = 0.35 L
Temperature (T) = 25 °C = 25 + 273 = 298 K
Pressure (P) = 1 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) =?With the application of the ideal gas equation, the number of mole of the gas present in the sample can be obtained as follow:
PV = nRT1 × 0.35 = n × 0.0821 × 298
0.35 = n × 24.4658
Divide both side by 24.4658
n = 0.35 / 24.4658
n = 0.0143 moleTherefore, the number of mole of the gas present in the sample is 0.0143 mole
Learn more: https://brainly.com/question/9731218
A solution of 0.2 M Sulfuric acid is titrated with a 0.2 M basic solution. In three to five sentences, explain how you can use the results of the titration as evidence for the ratio of sulfuric acid and the base in the balanced chemical reaction for the titration.
If there are 0.2 M solutions of both acid and base, the concentrations of hydrogen and hydroxide ions will be equal at equivalence point.
The reaction of sulfuric acid and a basic solution BOH occurs as follows;
H2SO4(aq) + 2BOH(aq) -----> B2SO4(aq) + 2H2O(l)
In the question, we are told that that both the solution of the sulfuric acid and the basic solution are 0.2 M.
The point where all the hydrogen and hydroxide ions have reacted according to the stoichiometry of the reaction. If there is really equimolar amounts of acid and base, the concentration of hydrogen and hydroxide ions will be equal at equivalence point.
Learn more: https://brainly.com/question/2192784
how long is a frozen turkey good for in the freezer?
Answer: Turkeys are good for up to 2 years if frozen well in a good freezer
I recommend to at least cooking it within 1 year for the best quality if you cook it in 2 years it may lose some of its quality taste-wise.
if it's not frozen well check the texture and smell to see if its gone bad. it also depends on the type of turkey you are buying, depending on the turkey you purchase always check for an expiration date such as a butterball turkey, so make sure you check their date.
background research about water purification and filtration!!!
PLEASE HURRY!!!
AND DO NOT GIVE ME FAKE ANSWER
Answer: It's a modern-day engineering challenge to remove human-made contaminants from
drinking water. After a quick review of the treatment processes that municipal water
goes through before it comes from the tap you will learn about the still-present
measurable contamination of drinking water due to anthropogenic (human-made)
chemicals. Substances such as prescription medication, pesticides and hormones are
detected in the drinking water supplies of American and European metropolitan cities.
The engineering design process can be used to design solutions for a real-world
problem (contaminated water) that could affect health.
Engineering Connection
The water that comes from our faucets has passed through a complex system designed
by many different types of engineers. Civil, chemical, electrical, environmental,
geotechnical, hydraulic, structural and architectural engineers all play roles in the
design, development and implementation of municipalities' drinking water supplies and
delivery systems. Hydraulic engineers design systems that safely filter the water at a
rate needed to supply a specific region and population. Chemical engineers precisely
determine the amounts and types of chemicals added to source water for coagulation
and decontamination to make the water safe to drink and not taste bad. Even so,
modern pharmaceutical and agricultural practices persist in contaminating our water
supplies.
Explanation: I'm big brain
Define the precision?
Calculate the mass of 6.9 moles of nitrous acid (HNO2). Explain the process or show your work by including all values used to determine the answer.
Answer:
324.4 grams
Explanation:
47.013 g/mol is the molar mass of the nitrous acid.
Therefore with weight, nitrous acid is equal to 47.013 grams.
This value can be utilized to determine the mass of 6.9 moles within the same compound.
Since a single mole = 47.013 grams, we simply multiply:
6.9 x 47.013 = 324.4
The mass of the given nitrous acid contained in 6.9 moles is 324.3 g.
The molecular mass of the given nitrous acid is calculated as follows;
HNO₂ = (1) + (14) + (16 x 2)
M = 47 g/mol
The mass of the given nitrous acid contained in 6.9 moles of the acid is calculated as follows;
m = nM
where;
n is the number of moles of the acidM is the molecular massm = 6.9 x 47
m = 324.3 g
Thus, the mass of the given nitrous acid contained in 6.9 moles is 324.3 g.
Learn more about mass and moles here: https://brainly.com/question/13860160
